Manifold Valves Dealers in Bhuleshwar, Mumbai

• Material: Alloy Steel
• Weight: 10-15kg, 15-20kg
• Feature: Good Quality
• Size: 0-5inch, 10-15inch
• Application: Air Use
• Connection: Socket Weld Ends

We have gained industry experience in offering the finest range of Valve Manifolds to our clients. Being one of the trusted suppliers and exporters of Valve Manifolds from Mumbai, Maharashtra, India, the offered manifolds are highly appreciated in the market, and we process it using approved raw materials. Before supplying to the clients, the Valve Manifolds are quality-tested on assorted standards of quality, and we source it from authentic vendors in the market.   Details : Our clients can avail from us Valve Manifolds that are designed under the expert supervision of our professionals. These are ideal to handle most corrosive fluids and are available in different models and sizes at market leading prices. Apart from this, we check all the products on various parameters to ensure flawlessness Sizes - upto 12 Types  -Socket Weld (Forged) - 45 Deg & 90 Deg Elbow, Equal Tee, Unequal Tee, Eccentric & Concentric Reducer, Nipple, Coupling, Crosses, Caps,Weldolets, Sockolets, Threadolets Grade- Stainless steel, Carbon Steel, Alloy Steel Hast Alloy, Titanium, Monel, Inconel, Nickel, etc Duplex Steel - UNS 31803, UNS32205, UNS 32750, UNS 32760 Specification - ASTM, AISI, ASME, DIN, UNS etc

ACE ALLOYS LLP is one of the expertise manufacturer and exporter of Steel Manifold Valves, which is a hydraulic manifold that combines one or more block / isolate valves, and one or more bleed / vent valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system. The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system so the fluid from upstream of the manifold does not reach other components of the system that are downstream. Then these Stainless Steel Manifold Valves bleedoff or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that component’s side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component. Carbon Steel Manifold Valves is factory tested with nitrogen for leakage at the seat and packing, which is performed with de ionised water at 1.5 times the working pressure; however, other tests like vibration, temperatures, helium and so on are available upon requests. Each and every package is labelled for proper and easy identification. ACE ALLOYS also offer these Alloy Steel Manifold Valves in different sizes, shapes and designs as per customers’ specifications at affordable rates. Manifold Valves Manufacturer & Supplier Best in Class Industrial High Pressure Manifold Valve, 2 Way, 3 Way & 5 Way Manifold Valves Manufacturer & Supplier in India Stainless Steel Manifold Valves, Carbon Steel Manifold Valves, Alloy Steel Manifold Valve, Aluminium Manifold Valves, Brass Manifold Valves Stockist & Dealers ACE ALLOYS LLP is one of the expertise manufacturer and exporter of Steel Manifold Valves, which is a hydraulic manifold that combines one or more block / isolate valves, and one or more bleed / vent valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system. The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system so the fluid from upstream of the manifold does not reach other components of the system that are downstream. Then these Stainless Steel Manifold Valves bleedoff or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that component’s side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component. Carbon Steel Manifold Valves is factory tested with nitrogen for leakage at the seat and packing, which is performed with de ionised water at 1.5 times the working pressure; however, other tests like vibration, temperatures, helium and so on are available upon requests. Each and every package is labelled for proper and easy identification. ACE ALLOYS also offer these Alloy Steel Manifold Valves in different sizes, shapes and designs as per customers’ specifications at affordable rates. Types of 2 Way, 3 Way & 5 Way Manifold Valves 2 Valve Manifolds Straight Type Tee Type H Type   3 Valve Manifolds Straight Type Tee Type H Type   5 Valve Manifolds Straight Type Tee Type H Type   Monoflange Valves Dimensions of ANSI/ASME B16.10 Manifold Valves 2-Way Manifold Valve ½” NPT Inlet & Outlet & ¼” NPT Vent Plug ½” NPT Inlet & ¼” NPT Vent Plug ½” NPT Inlet & Outlet & ¼” NPT Vent Plug ½” NPT Inlet & ¼” NPT Vent Plug ½” NPT Inlet & Outlet & ¼” Vent Plug 3-Way Manifold Valve ½” NPT Inlet & Outlet ½” NPT Inlet ½” NPT Inlet & Outlet & ¼” NPT Vent Plug 5-Way Manifold Valve ½” NPT Inlet & Outlet & ¼” NPT Vent Plug ½” NPT Inlet & ¼” NPT Vent Plugs ½” NPT Inlet & ¼” NPT Vent Plugs

2–way Manifold valve. 3-way Manifold valve. 5–way Manifold valve.

• Brand Name: Bhansali
• Condition: Good
• Product Name: Two Valve Manifolds
• Model: (Model No. 2TM1)
• Usage: Used on static pressure transmitters, switches or gauges.
• Place Of Origin: Mumbai
• Min. Order Value: 10,000

We are a major Manufacturer, Exporter and Supplier of Two Valve Manifolds (Model No. 2TM1) in Mumbai. The Two Valve Manifolds (Model No. 2TM1), offered by us, is designed in a single block configuration. The designing of the Two Valve Manifolds (Model No. 2TM1) is accompanies by a female screwed inlet and outlet port. The inlet and outlet combine the isolation valve and vent/calibration valve and the Two Valve Manifolds (Model No. 2TM1) are generally used on static pressure transmitters, switches or gauges.

We are a leading Manufacturer & Exporter of Valve Manifolds such as Pipe to Pipe 2 Way Valve Manifold, Pipe to Flange 2 Way Valve Manifold, Flange to Flange H 2 Way Valve Manifold, Direct Mounted 2 Way Valve Manifold, Pipe to Pipe 3 Way Valve Manifold, Pipe to Flange 3 Way Valve Manifold and many more items from India.

G-lok manifolds valves. g-lok range of manifolds valves offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. G-lok valves manifolds series offer 2, 3 and 5 valves configurations which come in remote mounting "r" type ( pipe to pipe ), direct mounting "t" & "h" type ( pipe to flange & flange to flange ) onto the instrument on 2 18" (54mm) centre.

• Material: SS 316 SS304
• Model Name/Number: manifold valves
• Size: Size: 1/2" , 1/4 " 1 " ETC
• Brand: AOS
• Pressure: 10 BAR TO
•  :  

• Material: Brass
• Application: Industrial
• Color: Golden
• Feature: Blow-Out-Proof, Casting Approved
• Pressure: High, Low, Medium
• Connection: Butt Weld
• MOQ: As Per Customer Needs

5-Valve Manifold offer two mainline block valves and a double block and bleed valve for the equalizer line. The manifold is primarily intended for gas service and is used to connect differential pressure transmitters to system flow meters. Connections are 1/2" Female NPT on 2-1/8" (54mm) centers Standard feature include two 1/4" NPT static pressure connections on the instrument side and one 1/4" NPT vent connection from the bleed valve.  Connection : 1/2" Female NPT to 1/2" Female NPT.  One-piece, high strength body construction for safety no welding used.  Bonnet lock pin prevents accidental valve disassembly.  2-1/8" (54mm) Port centerline dimension for proper alignment.  100% pressure tested for shut-off and at all seals.  316 stainless steel construction for superior corrosion resistance.  Bonnet-to-body seals are metal-to metal. No O-Rings are used.  Manifolds feature a 4:1 safety factor.

• Certification: ISI Certified
• End Connection: NPT, BSPT, BSP & Socket Weld
• Working Pressure: 6000 psi (413 bar)
• Size: 1/4" & 1/2" & 3/4"
• Specility: All valves are 100% factory tested prior to shipment.
• Types: 2 ways, 3 ways & 5 ways

The manifolds valves are designed for static pressure and liquid level applications. These manifolds are available in traditional and compact body designs. Manifold connections include female tube fittings, pipe ends (NPT and ISO 228/1), and flanges (MSS SP-99) in 1/2 and 3/4 in. and 12 mm sizes We are the trusted name in the industry when it comes to the manufacture and supply of valves, fittings and industrial couplings with adapters. We have served a wide variety of industrial sectors, and supply products which conform to industry standard requirements and ensure safety and system efficiency with their precision design. We offer an extensive product portfolio, and are also trusted manifold valve manufacturers, who offer reliable products for high end system efficiency. We understand the importance of durable quality in industrial valve and fitting design, and that is why we never compromise on quality.  Key Features Some of the key features of our superior quality high precision manifold valve design are Units duly designed to withstand system static pressure. The manifold valves are manufactured to endure all differential pressure and liquid level application needs. Units have been manufactured according to a compact assembly design. This translates into complete products which have a reduced weight and size. The design and manufacturing details of the valve manifold units ensure fewer chances of potential leak points. All units undergo extensive testing procedures to assess quality and precision before being supplied to customers. Units are available in a stainless steel 316 material series design. The units have been manufactured to ensure easy installation and hassle free maintenance in aggressive industrial systems.  Bonnet Assembly Bonnet : back seated blow out proof. Spindle : ground and thread rolled. Packing below thread. Spindle Tip : non-rotating tip shut-off type & soft seated. Dust cap : dust cap protects stem threads from external contamination heat code traceability.

  Introduction A wide array of configurations are available such as 2 Way Manifold Valve, 3 Way Manifold Valve and 5 Way Manifold Valve. We also manufacture customized Manifold Valve in various styles , shapes and sizes.FAV is one of the reputed Manifold Valves manufacturer. Application FAV Instrumentation Manifold Valve is designed for regulation and management of instrumentation, process and control systems. The functions of Manifold Valve include pressure isolation, process equalizing, draining and venting and custody transfer. Manifold Valves – 2 Way 2 way manifold valve combines an isolation valve with a vent valve in one compact unit. Connections are available in a variety of sizes and thread forms including NPT, BSPT & BSPP. Designed to combine isolation, calibration or test with venting of instruments in one compact assembly. The applications for the 2 way manifold valve include pressure gauges, transmitters and switches. The pressure instruments are connected to the manifold valve with 1/2-inch FNPT connections. Manifold Valves – 3 Way   3 way Manifold Valve pipe to pipe (R), pipe to flange (T) and flange to flange (H) designed for connecting system impulse lines & transmitters. These Manifold Valve consist of 1/2″ NPT(F), pipe to flange or flange to flange connections on 54mm (2 1/8″) centers, and of one equalizer valve, two block valves and 2 nos 1/4″ NPT(F) purge (VENT) connections. These Manifold Valve are rugged in construction to withstand high pressures and temperatures. The Manifold Valve are rated for pressures as high as 6000 PSI at 200 o F or 4000 PSI at 500 o F. with PTFE Packing. For a Higher Temperatures Grafoil Packing is used. Manifold Valves – 5 Way   5 way Manifold Valve is a general purpose instrument manifold designed for connecting differential pressure transmitters or flow records to impulse line tubing. Connections are 1/2″ NPT on industry standard 3-2/8″ center-to-center dimensions (models for 2-3/16″ and 2-1/4″ center-to-center dimensions are also available). 5-valve manifold (Double Isolate, Equalize, Double Vent) for an economical way of mounting differential pressure transmitters. 5 way Manifold Valve are designed for remote mounting on instruments using threaded instrument & process connections. These manifold valve are having two isolation, one equilizer & two drain/calibration valves. The standard process & instrument connections are ½” NPT F & the drain connections are ¼” NPT F. The blanking plugs are provided. The instruments connections are positioned at 54 mm center distance but can also be used for other center distances with the help of screwed fittings.

• Working Pressures: up to 6000 psig (413 bar)
• Temperatures: up to 1200°F (648°C) with Grafoil valve packing
• Connections: 1/2" Inlets
• Bore: 0.21" (5.4mm)

Mcneil Instruments Inc offers a variety of 2 Valve instrument manifolds. The 2 Valve manifolds are designed for static pressure and liquid level applications. These manifolds are available in traditional and compact body designs. Manifold connections include female tube fittings, pipe ends (NPT and ISO 228/1), and flanges (MSS SP-99) in 1/2 and 3/4 in. and 12 mm sizes We are the trusted name in the industry when it comes to the manufacture and supply of valves, fittings and industrial couplings with adapters. We have served a wide variety of industrial sectors, and supply products which conform to industry standard requirements and ensure safety and system efficiency with their precision design. We offer an extensive product portfolio, and are also trusted manifold valve manufacturers, who offer reliable products for high end system efficiency. We understand the importance of durable quality in industrial valve and fitting design, and that is why we never compromise on quality. Application Chemicals industry Fats and fertilizer industry Ship building Construction industry Key Features Some of the key features of our superior quality high precision manifold valve design are Units duly designed to withstand system static pressure. The manifold valves are manufactured to endure all differential pressure and liquid level application needs. Units have been manufactured according to a compact assembly design. This translates into complete products which have a reduced weight and size. The design and manufacturing details of the valve manifold units ensure fewer chances of potential leak points. All units undergo extensive testing procedures to assess quality and precision before being supplied to customers. Units are available in a stainless steel 316 material series design. The units have been manufactured to ensure easy installation and hassle free maintenance in aggressive industrial systems.

• Brand Name: RSI
• Minimum Order Quantity: 10 Piece

We are offering instrument manifold valves. » air header distributer type : bar stock » air header distributer type : pipe

A wide array of configurations are available such as 2 Way Manifold Valves , 3 Way Manifold Valves and 5 Way Manifold Valves We also manufacture customized Manifold Valves in various styles , shapes and sizes.FAV is one of the reputed Manifold Valves manufacturer.

• Model: 2 Valve
• MOC: AISI SS316 / AISI SS304 / Exotic Material
• Temp Lmiit: 250°C
• Pressure Limit: 10000 psi
• No. of Valves: 2
• Design: R Type

2 valve manifolds are designed for connecting system impulse lines and transmitters. These manifolds are rugged in construction to withstagh pressures and temperatures. The manifolds are rated for pressures as high as 6000 PSI at 200°F or 4000 PSI at 500°F with PTFE Packing. For a Higher Temperatures Grafoil Packing is used     Special Features : Threaded Vertical Port Inlet and Outlets Isolation Bonnet on the sides, Equalizing Bonnet on the front Available in Exotic Materials

• Type: R Type, T Type, H Type
• Size: 1/8″ To 1″
• Working Pressures: up to 6000 psig (413 bar)
• Temperatures: up to 1200°F (648°C) with Grafoil valve packing
• Thread: NPT, BSPP, BSPT
• Connection: Threaded, Flange End
• Function: 2 Way, 3 Way, 5 Way
• Body Shape: Square, Rectangle
• Pressure Rating: 1500 Psi, 3000 Psi, 6000 Psi, 10000 Psi, 15,000 Psi
• Orifice Size: 2 Mm To 9.5 Mm
• Media Temperature: (-120* C To 500*C ) Range As Per Pressure
• Body Type: Bar Stock, Forged
• Handle: Bar T-Handle
• Packing Details: Box Packing, Wooden Pallet
• Equivalent Brands: Swagelok, Parker, Rose Mount, Hamlet, Oliver Valves, Hoke

Manifold Valve, Air Header, Pipe Fitting, Flareless Fittings

We manufacture and supply exceptional quality Manifold Valves that are in wide demand in the market for its various features and properties. The basic details of our Manifold Valves are given below. Designed For : Direct mounting on connecting systemDirect mounting on impulse linesDirect mounting on transmitters Material Of Construction : BrassCarbon SteelMonelStainless Steel Manufacturing process : BarstockForged Testing : Hydrostatic test performed at 1.5 times of required working pressure Pressure : 4000 PSI to 6000 PSI Temperature : 400 F to 200 F

Manifold Valve, compression tube fitting, eq tee, din stud

Super Fasteners Industries is the leading manufacturer, exporter and supplier of manifold valves. Our diligent workers us to offer a quality proven range of manifold valves that find application in various industry segments, these valves are manufactured using premium quality raw materials like ferrous and non-ferrous metals.Further, it offers the simplification of connections between instruments such as pressure gauges, pressure switches, pressure transmitters, indicators and recorders. In addition to this, our manufactured Manifold Valve offers the cut-off and zeroing of instruments. These are highly appreciated by our clients for the features like easy installation, compact and cost effective. These are widely used for applications like instrumentation, process and control systems. Also, these can be availed at reasonable rates. Key features:• Premium quality raw materials used• Ferrous• Non-ferrous metals• Offers the cut-off and zeroing of instruments

Valve Manifolds are functionally intended to Control, Measure, Isolate, Equalize, Calibrate, Drain, Vent or Differentiate the pressure of liquid & gases. Valve Manifolds are available in 2, 3 & 5 Valve confugrations.

Maya~steel-(india) 1st.kumbharwada mumbaì s.s.316316l-304304l-&-a-105 manifold valv &valv-fittings-from=ramdev metal indu.-&-maya steel-(india)-mr.~bhomaram bishnoi-mob.no.-=.

Manifold Valve, Breather Plug, air quick coupler, lubrication fittings

Manifold Valve, Ball Valve, gauge valve, Instrumentation Tube Fittings

Stainless Steel Manifold Valves, Mounted Points, Slewing Bearings

Manifold Valve, Ball Valve, cocks fitting, Pipe Fitting, valves fitting