Manisha Overseas Bhiwandi, Mumbai, Maharashtra

Production of fabrics successively with the same design is easier utilizing a warp-tying machine to exchange the beams. Jaytex warp tying machine is the most effective and low budget and maintenance free machine which fulfills this requirement to a large degree. Tying installations, which requires a minimum of time for changing the warp contributes a lot to the efficiencies and low stoppage rates of the high performance looms. Jaytex is the pioneer in developing warp tying equipment with 100% Indigenous components. End to end warp tying at a high speed, directly on loom along with healds, reeds etc. It is a highly compact & sophisticated machine, which deals with delicate yarn at a very high speed. The working range of this machine is practically unlimited it can tie any material with or without lease may it be cotton, spun, worsted, filament, P.V., woolen, denim slub, furnishing auto or industrial fabric from finest to coarsest with high efficiency at low labour cost. Easy adaptability to different tying methods at any time. Maintenance free timing belt drive in all the machines. It is a guarantee for service, spares & economy. JAYTEX fully automatic warp tying machine. Fitted with maintenance free timing pully belt drive, having 24 – volts permanent magnet D.C. electric motor 3000 R.P.M., with cooling fan. For speed control P.C.B. with control pot and on-off switch is provided. Completely adjustable light fitting for bright illumination on the knotting spot. The machine is totally enclosed with necessary cover from all the sides, to prevent fiber, dust, lint, yarn residuals etc. entering the working parts. Digital counting & auto stop motion in case of double end selection or breakage optional available in all model machines. Models for Warp Tying (Beam Knotting) Machine JS ModelTying from both sheet to sheet for sized warps, selection by selector needles, count range 6’ s to 80’s single. JL ModelFor leased warps. Tying from both lease to lease, for the warps wound on sectional warping or leased by machine after sizing with double lease. Count/ Din. Range 110’s cotton / 50 Din. Filament up to 6’s cotton 2000 Din. Any type of mixed blends, worsted, spun, P.V. etc. JSL ModelUniversal type provided with lease to lease & sheet to sheet tying module. Yarn range as above. P.U.A.C. ModelIdeally developed for suiting, shirting, furnishing SLUB & FANCY yarn. With technical provisions adapted any counts and type of yarn with un-even condition provided in a single width, can be knotted with or without lease (two selection system). As per the thickness or count of warp the automatic self-adjusting thread clip assures appropriate tension to the threads of both layers no matter how coarse or fine they are. With variable speed control inching motion brighter tube illumination for clear knotting vision the PUAC is developed for today’s high-speed textile industry. Pattern Control ModelA uniquely developed machine with multiple selection system (i.e. L to L, S to S, L to S, S to L) can be used as per your knotting needs. The automatic self adjusting thread clip takes care of any type of pattern with a multiple selection system, & double end knock-off arrangement. It also takes care of different series of yarn with un-even counts and denier wound in one single width. Jaytex machines are electronically regulated it can infinitely adjust from 60 to 600 knots per minute according to count and condition of the warp. An emergency stop motion in case of a fault in selection. Clear display of pattern counts and so on in progressive counting. The machine can handle virtually any yarn delicately without any worry or damage, be it multi filament, pure silk, double or single thread with multi colored pattern, and variations in yarn count with or without lease. Ranging from the finest to coarsest. Ideally suitable for suiting, shirting and furnishing SLUB & FANCY yarn. Heavy Duty ModelFor very heavy counts and Din. sheet to sheet or lease to lease ranging from single 6’s up to 4 X 6’s and 3000 Din. higher range then single 6’s or 800 Din. “PUAC” model machine is recommended. Yarn Dressing FrameJaytex frames are manufactured as per your requirement in height & width ranging between 120 cms. (50”) up to 400 cms. (160” ) With in this range every requested width can be accommodated in stages of 25 cms. (10”). For twin beams your choice are either one frame covering both the warp beam width, or one single frame with double side clamping system or two single frame with coupling device. Double width, separable warp tying frame permit rationalized working on looms with twin warps. The separated tying frame can also be used for looms of normal single beams. Jaytex dressing frames are made out of specially extruded alloy sections which are very sturdy and light weight and at the same time durable for years of service. The yarn clamp holding and tensioning device are simplified for faster dressing; it is designed for easy adjustments vertically and horizontally, to adjust the height according to your loom. They come in very wide range of working width, according to your looms and choice. For faster dressing and easy clamping of coarser warps below 12’s we recommend you our HD/UB type frames, provided with very sturdy U type rubberized, alloy clamps, with oval shaped EN-9 steel bars. Clamping system of Jaytex dressing frame is designed to press the entire warp sheet in parallel and firm condition. Rubbers on both the sides of tension rails guarantees firm grip to the most slippery and fine warp. Jaytex also has Heavy Duty Bar Tensioning Yarn Dressing Frame specially developed for denim & coarser warps. These frames are very sturdy. Special type frames for any imported machines can also be made on order.

Tappet with Tucking Rapier with Upper Motion Loom   It has 2 to 4 colours weft selection, exchanging colour per weft. It's speed increases very much than the shuttle loom, this machine is improved on the basis of the use tappet loom instead of dobby and the tappet loom motion is for good stability, easy to operate, convenient to maintainance and high feature price ratio. This machine is speacially of plane fabric with cotton as well as synthetics.    

Tappet with Tucking Rapier with Lower Motion Loom   Reed width: 55 inch to 90 inch. (55 inch loom machine size is 9.5ft x 5.5ft) In 55 inch model, side wall board is of steel board and not of iron casting. Mechanical take up & let off is in-built. Machine working speed is 200rpm with tucking device. Main motor power is 0.8Kw. Machine with tappet for 2 pcs heald frame, each double heald frame can put 3 lines heald wire. Mechanical colour selector, 2 colours. You may select up to 6 colours with Electronic Colour Selector. Small feeder 2 pcs saves space by fixing feeder directly on the Loom. Warp beam pipe is applicable in both normal Warping Machine as well as Sizing Machine. Technical Parameter  

Our successfully running model-945 tappet rapier with wider width & 3 types of tucking devices (left, center & right sides). It has got packed border on both pana (4 sides).   100 double 1400 twisted cotton yarn (weft & warp yarn).   Manisha Overseas is a trusted name in Bhiwandi for all new Chinese Textile Machines and Accessories :- Low & High Speed Tappet/ Dobby Rapiers Jacquard Machines Waterjet & Airjet Machines [in association with "EMMTEK" - a brand of M/s. Shreeji Int'l Inc. (Surat, Gujarat)] Knotting Machine and Leasing Machine [(agent of "JAYTEX" - a brand of M/s. Jayantilal S. Gandhi & Co. (Ahmedabad, Gujarat)] Associate of Textile Excellence News Paper We offer following services to our Clients:- Proper guidance to prepare Project with proper documents and layout. Assistance to obtain Loan from Bank. Convenient Project Implementation. Timely delivery of Machines. Proper installations of Machines by our expert technicians. Training to labourers and technicians during installations of Machineries. Assistance for marketing of fabrics. Assistance to get government benefits. We offer best price in market.

Description And Function With hundreds of patterns, quilting for mattress, handbag, clothing, bedding, sofa products. Characteristics Computerized quilting machine, plenty patterns for choice, and easy to designing new patterns Main shaft and X & Y all driven by Servo driver 360° quilting; Both for joint and independent patterns On-line help on operation and display of quilting Stitch length 2mm-6mm adjustable Pattern compensation to adjust quilting according to pattern Automatic stop on thread broken (optional) Infrared sensors to guarantee the safety of the operator

Weight : 2500 KGS

Feature Reliable work quality Easy & simple operation Special do work in #10 & #12 rhinestone Powerful and durable ultrasonic system Equipped with international brand parts for assure quality Equipped with laser marking light Equipped with new rotation system Low sound Table size : 850*800 Available color : green & blue Give full 1 year warranty for all electrical card (control card & ultrasonic both)  

Types Flat and Sequence Details for Flat Machine With Dahao Main Motor, With X-Y Stepping Motor, With 322 Dahao Computer with USB, With Shaft Drive System, Main Shaft 18mm and Beam Size 300X300, Beam Thickness 8mm, Without Cutter, 120mm Panto Graph. Details for Sequence Machine With Dahao Main Motor, With X-Y Stepping Motor or Dahao Servo Motor, With 328 Dahao Computer with USB, With Shaft Drive System, Main Shaft 18mm and Beam Size 300X300, Beam Thickness 10mm, With CUTTER, 120mm Panto Graph, Machine back side have L support.

Weight : 2500 KGS

It is used to weave crude fiber, chemical fiber and blending yarn etc. Type Plain, Dobby and Jacquard Feature It has 6 colors weft seleginction, exchang color per weft . Its speed increases very much than the shuttle loom, this type loom can evidently improve unit area output and fabric quality. Also its suitability is wide.

TT-96 Rapier Loom is a new developed machine according to the textile industry developing trend in China. It adopted advantages from the same style machines in domestic and overseas. It is a type of middle and high grade machine at leading level in domestic. The machine adopted the Machinery Center and Digital Aluminum-Wheel Grinder as key processing, imported and used world famous electrical components, inventing high precision whole yoke aluminum-wheel-core construction, using computer to control the functions of machine, electrical color choosing, eight weft colors, high speed and high efficiency, fitting for natural fibers such as cotton, wool, silk, ramie etc., also chemical fibers, mixing fibers of light or middle or heavy knit. Structural And Technical Features > Shedding Mechanism: 1) Active mechanical dobby or electronic dobby, mounting mode in lower position. 2) Electronic jacquard device. > Weft Insertion Drive: Actively drive by the two sides of conjugate cams of machine. > Weft Supply:Enable the weft package to continuously unwind by independent electronic weft feeder. > Automatic Pick-Finding: With automatic pick-finding and anti-weft bar functions. The automatic reversal number of dobby can be set as required. > Weft Color Selection: Electronic weft color selector, max. 8 colors. > Weft Stop Motion: Adopt piezoquartz weft-detector system. > Beating-Up Motion: Actively drive by separate sley and two sides of close conjugate cams of machine, controlling the beating-up. > Let-Off Motion: Apply mecahnical or electronic let-off motion. Permit to select upper-and-lower warp beams or front-and-back warp beams.  > Warp Stop Motion: Apply electric point contact warp stop motion. > Take-Up Motion: Adopt mechanical or electronic take-up motion. > Weft Density Adjustment: 1) Set by changing the gears. Provided with change gears for 9.91-38.2 picks/cm together with mahcine, self-provided with the gears for more than 38.2 picks/cm by users. 2) Electronic setting. > Selvedge Device: Leno selvedge device or tucking-in device. > Lubrication: Oil circulation lubrication and grease lubrication. > Operation Mode: By buttons. There are step buttons, start buttons and stop buttons plus forwards and backwards buttons for dobby. > Inspection Mode: Electronic inspection mode for machine running status. Visual inspection mode for fabric quality. > Stop Treatment: Stop at the fixed position, and automatically calibrate the cloth-fell. > Signal Treatment:Four-color signal lamp for indicating warp stop, weft stop, calling signal and reaching fabric length.

It is Belt Type High Speed Digital Textile Printer Feature Using 4 Epson DX 5 printing head Wide color range: Double 4, double6, double 8 color option Fast speed: The fastest speed up to 54 sqm/h The Max. printing width: 1600mm Can print all kinds of fabrics Acidity, reactive, disperse and coating ink all compatibility   10KG Ink give for free testing 800SQM/DAY 20 hours can print High Speed 4 Head Epson DX5(5TH Generation) Mimaki Type

Color : 4, 6, 8 color option: C.M.Y.K.Lc.Lm.O.R.B.G

Power : single phase AC + earth wire220V ± 10%, 15A 50HZ

Weight : 600KG