Manual Valve Dealers in Mumbai

Application – Single or double-acting cylinders. Actuation – Lever operated, detent positioned. Functions – Pos. 1 – Oil is directed to “advance” side of cylinder, oil from “retract” side goes to reservoir; cylinder “holds” with pump shut off. Pos. 2 – Oil goes to “retract” side of cylinder; cylinder “holds” with pump shut off. When using as a 3-way valve for single-acting cylinders, port “A” or “B” is plugged. Used on these pumps – P460, PA6D, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series. NOTE: 9504 can be remote mounted with a 9510 Subplates. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to this valve. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9504, 9584, 9610 and 9610A, order four 12001 cap screws. For valve 9582, order two 12001 and two 10856 cap screws. NOTE: Valves 9501, 9502, 9504 and 9507 can have a port blocked or have a closed center position. When a port is blocked and the valve is shifted to the blocked port, the pump will generate excessive heat. An electric or rotary air pump can either be turned off manually or with a pressure switch. Reciprocating air pumps may be adjusted to stall out and stop. NOTE: Gauge ports monitor pump pressure only, not pressure to the hydraulic cylinder(s).

• Features: Hand lever operated ,Sturdy valve design, Highly efficient operation, Rust resistant design

• Material: Forged
• End Connection: Wafer,flanged
• Pressure: Vacuum To High Pressure
• Port Size: DN350
• Power: Pneumatic
• Operator: Electric Actuator, PNEUMATIC, Lever
• Media: Air, Water, Gas, Fuel, Powder/Solids
• Structure: Butterfly

• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Material: Metal
• Feature: Blow-Out-Proof, Casting Approved
• Automatic Grade: Manual
• Pressure: High, Low, Medium
• Number Of Way: 2way, 3way, 4way

These advantages are especially for large Valves applications. The best and obvious advantages are saving of weight, space and cost. We are also known for Butterfly Valves Manufacturer in India. The maintenance costs are generally down because there is less number of mobile parts and there are no pockets to store fluids.Valves are especially well for the handling of large flows of liquids or gases.

• Description: 2/2 way manually wheel operated Ebonite Lined diaphragm valve. End to end design as per  BS EN 558-1:1995.
• Size / End Conn.: 15 NB to 100 NB / Screwed BSP & Flanged end (ASA 150#, BS 10 Table 'E', 'D', 'F') , For above sizes consult us.
• MOC: STD - IS 210 Gr FG 220 (Cast Iron with Ebonite Lining) Optional - IS 1865 -1991 SG 400/18 (Ductile Iron with Ebonite Lining)
• Diaphragm: STD - Nitrile, EPDM and EPDM backed by PTFE
• Temp.: STD - 80°C Optional - 110°C
• Actuator: STD - Manual - ABS, Cast Iron Wheel

We are the main supplier of this product.

VC-Series, Remote Manual Directional Control Valves Flow Capacity 17 lmin Max. Pressure 700 bar

• Size: Available In Different Sizes
• Pattern: Plain
• Automatic Grade: Manual
• Feature: Durable
• Type: Directional Control Valves
• Finish: Polished

• Feature: Durable
• Application: Water Fitting
• Pressure: High Pressure
• Material: Cast Iron
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 4/5inch, 5/6inch, 6/7inch

We use packaging materials that are industrial grade, and non-toxic. The labels on packages are tamper and smudge proof. We have stringent packaging related policies. Based is Mumbai(India), we are entrusted with the chore of providing top-notch products in the domestic market.   Our Features : Design - Wafer type Manual Butterfly valve Material - CS ASTM A 216 Gr. WCB, CI , S.G. Iron, CF8, CF8 M etc. Disc - CI,MS,SGI,SS304.SS316,GM,monel Trims - CI,MS,SGI,SS304.SS316,GM,monel Seat - EPDM, Nitrile, PTFE, PFA,FEP Action - Manual, Lever, Gear operated with electrical, Actuator Rating - ASA 150, 300, PN 10,PN16 Ends conn. - Flanged ends B16.5 Mfg. - BS 51551 API609/1S 13095 Testing - API 598 / BS 6755 Application - Air, Gas, Water, chemicals, Pharma, oil, acid, Foods, vacuum, heat treatment ,paper & sugar industries

Hydro Dyne’s Manual Rotary Spool Valves provide precise operator control for switching or diverter type applications. This high pressure valves are employed to reverse the oil flow. Markets: • Agriculture • Construction • Material Handling • Miscellaneous Industrial • Mobile Hydraulics   Applications: • Single & Double acting circuits • Pilot circuits • Uni-directional motors  

• Material: Cast Iron
• Color: Blue
• Usage/Application: Industrial
• End Connection Type: Flanged
• Media: Water
• Packaging Type: Box
• Surface Finishing: Color Coated

General:   The Balancing Valves is designed for double regulating, control and shut off valve with built-in pressure drop measuring facility.We have a wide range from 15mm to 300mm. It is divided in two parts, 15mm to 40mm and 50mm to 300mm as below, For 15mm to 40mm,   Application:   The hydronic balance is a significant requirement for the efficient operation of a hydronic heating or cooling installation.  In  an unbalanced   system   under   or   over provision of hot water to individual radiators or circuits can occur. Apart from the correct selection of radiator valves, regulation of individual circuits is also necessary and in some cases, such as in DIN 18 380, VOB part C, required by national standards.The Valve is a variable orifice double-regulating balancing valve for the return with additional functions shutoff, draining and filling.It can be upgraded to an automatic balancing valve - even after the system has been taken into commission and under system pressure.   Features:   Quick and easy measuring with SafeConTM measuring connections Dimensions DN15 to DN40 can be retrofitted with a Kombi-Diaphragm Unit High accuracy of pre-setting because of individual adjustment Robust valve body made of corrosion resistant red bronze Available in sizes up to DN80 Visible pre-setting dial with concealed pre-setting wheel Maintenance free spindle with double O-ring sealing’s PTFE-seat sealing   Specifications:   Sizes DN50…DN300 Nominal pressure PN16 Medium Temperature -10 ~ +110 Maximum Body Material IS:210, FG 220 CI Stem Material ASTM A276,GR SS 410 Disc Material Stainless steel Disc Hand Wheel Cast Iron Leakage Rate No visible leakage Medium Type Water Flange standard IS1538 Shell Test pressure 24bar Seal Test pressure 17bar  

• Feature: Durable, High strength, Easy to install
• Features: High strength , Easy to install , Dimensional accuracy

Make: Leader, W.J. , KSB ,  Avcon ,  Kalpaka,  Air Max

We offer Manually Operated Industrial Cylinder Valve. Screw on type handwheel operated industrial cylinder valve with safety device to use for co2 and cng as per bsen:849 is:3224 approved by bis & peso with safety device - only rupture type or fisible alloy and rupture type. Male female (extint) outlets

We are largest valves manufacturers in India and metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows unrestricted passage. The valve may also be opened incrementally to regulate flow. There are different kinds of Butterfly Valves, each adapted for different pressures and different usage.When the butterfly valve is closed, the disc is turned so that it totally shut off the passageway. When the Butterfly Valves is fully open, the disc is rotated at a quarter turn so that it allows unrestricted passage. The butterfly valve may also be opened incrementally to regulate flow. There are different kinds of butterfly valves, that are adapted for different pressures and different usage. A Butterfly valve is a rotational motion valve with a quarter turn.

Our hydraulic cylinders are devised under strict supervision. These are suitable for varying critical applications, viz. atomic, hydro and thermal power plants, defence, aerospace-industries, railways, etc. We use international quality seals in our industrial hydraulic cylinders and industrial hydraulic jacks, that are self-adjusting and are suitable for long trouble free life.

• Valve Size: 40MM TO 600MM
• Brand Name: KITZ
• Media: Water, Air, Gas
• Pressure: PN 10 & PN 16
• Temperature of Media: Low Temperature, Medium Temperature
• OPERATION: LEVER/GEAR

We have the exclusive stock & are the trader of KITZ ALUMINIUM BUTTERFLY VALVES from sizes ranging from 40mm to 300mm ready stock.

Features: Meets BS 7350-Double Regulation Value type 4. Precise Double Regulation. Precise flow measurement using differential pressure measurement across precisely suitable/controlled variable orifice. Digitally readable valve setting in 60 precise steps. Provision for on-site limiting & locking the maximum valve opening(memory setting). Provision for sealing/locking to make maximum valve opening, tamper proof. Globe type construction for precise control. Valve Pressure Temperature rating meeting PN 10,PN 16 & PN 25. Guaranteed Cv's in digitized/graphs format provided with each valve. Sizes DN 50(2") to DN 300(12"). Wet parts in SS 410 standard. Body & Bonnet in Cast Iron FG260 standard & SG Iron/Cast Steel/Cast SS optional Soft EPDM seat stranded and VITON seat optional. Flow measuring accuracy with a maximum of 5% deviation. Tight shut off design with no visible leakage. Shell tested at 150% of rated pressure. Differential pressure measuring ports suitable for standard DP points. Drain plug and compatible accessories optional. Other MOC's like UPVC/CPVC/PPH/PVDF/Clear PVC available in the size range of 15 mm. to 100mm. under 150# rating 

We are offering ynfd manual tank bottom valve. “pbs-yuanan” valves ensure the highest levels of hygiene & safety. They are easy to install and maintain, & offer the lowest possible lifecycle cost. Our smart valve solution ensures optimal flow throughout your process. We offer a wide range of hygienic valves, which deliver the utmost in reliability across almost every applications .

• Compressor: SS-ASTM A351 CF8.

Heavily Lined Body with proper selection of diaphragm, provides unique control on corrosive liquids. Fluids are completely isolated from the actuator and environment. This bi-directional valve is 'Hygienic' design, can be sterilized and has a low turbulence to flow.Valve Body :CS-ASTM A216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351 CF8 (DIN 1.4301). SG Iron-ASTM A536, Gr.60-40-18 (DIN 0.7043) (GGG40.3).

manual valves, automatic industrial valves, Y Type Pneumatic Valves

Mechanical and Manual Valves, Fixed Revolving and Foldaway Handles

Manual angle valve, plumbing valves, PEX Fittings, Pex Pipes

manual valves, Control Valves, Rotameter, IP Converter, Isolator

manual valves, Industrial Valves, Globe Valves, Ball Valves

Hand Operated Butterfly Valve, push pull valve, Pneumatic Rotary Actuators

hand lever valve, Female Connector, Rod Eye Bolt