Markers Dealers in Mumbai

Century’s Everon Marker is a unique marking device used in textile mills & factories for permanent marking on gray cloth & fabrics. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. It is also known as 'pump-type marker' or 'TEXPEN’. The viscous ink makes permanent, bright & opaque markings on all kinds of fabrics and remains visible even after the dyeing & other finishing processes. It works on all kinds of fabrics like cotton, denim, polyester, wool, silk, linen etc. It is widely used in dyeing houses & textile mills in processes like dyeing, scouring, bleaching, hosiery, knitting & weaving. Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube. Advantages: Permanent, Bright & Opaque Markings on any fabric. Markings are acid alkali resistant, heat resistant & remain permanent even after dyeing & finishing processes. Hard Aluminium body makes it difficult to break, puncture or leak. Works on all kinds of fabrics including cotton, silk, polyester, wool, denim, linen etc. Rubber Valve at bottom enables smooth & automatic ink flow. Zero Wastage of Ink compared to tube type markers which waste 15-20% ink. Direction of Use: Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip. Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow. As pressure reduces, press the rubber valve 2-3 times to continue writing. Do not press the rubber bulb when not in use as it will lead to increase ink pressure. Clean the tip & put the cap back on when after each use. Caution: Harmful if swallowed or intentional inhalation. Avoid contact with eyes. Keep away from open flame. Please test before use.

• Material: Plastic
• Application: Writting on white board
• Weight: 10-15gm
• Feature: Erasable, Leakproof, Light Weight
• Ink Color: Black, Blue
• Ink Type: Temporary
• Bullet Tip Width: 1-1.5mm

• Material: Cloth Type labels.
• Application: Wire Identification in Electrical / Electronic Wiring
• Packing: 100 Pcs/Bag or Spool Packing suffix ‘S’ after Cat. No. eg.: CMC-06.5/S

Imported quality Low odor, flawless writing Excellent erasability Available in Black,Blue,Red and Green colors No squeaking tip makes it smooth while writing Non-toxic.  Ideal for use in office, school, college, and corporates Quick drying 

• Type: Marker
• Brand Name: Centuryply
• Material: MARKER
• Application: Home, Industrial, Institute, Office, School
• Ink Type: Permanent
• Feature: Light Weight, Smooth Writing
• Product Name: CENTURY

marcador de marcado caliente   es ampliamente utilizado para escribir sobre metales calientes, especialmente en superficies de hierro y acero calientes. La tiza comenzará a escribir a través de la fusión de uno de sus componentes químicos a una temperatura mínima de 100 grados centígrados y transmitirá sus marcas brillantes en condiciones de calor hasta una temperatura máxima de 1100 grados centígrados. Se considera que es un sustituto de las pinturas para marcado a alta temperatura. Se usa para marcar ingots, castings, rolls, bobbins, wheels, plates, etc.

We offer Lamp Pumped Laser Marker, which can mark a variety of metals and non-metallic materials. Our range of lamp pumped laser marker is well acclaimed for its flawless performance and accuracy. The qualitative features of our lamp pumped laser marker, makes us the undisputed manufacturers and exporters of the same. Characteristics three phase with average power consumptionworking hrs of lamp around1000 hrsbeam quality sharp with adjustable beam expandereasy and stable in operation widely used in household applianceselectronic componentsintegrated circuits(ic)mobile telecommunicationsmedical equipmentoptical clocksinstrumentationsanitary warejewelry accessoriescar motorcycle accessoriesprecision metalplastic buttonsconstruction materialpackagingpvc pipes

We are a distinguished manufacturer and supplier of indelible ink in India. The indelible ink offered by us is of the best quality and is available at pocket friendly prices. Below are some of the common features of our indelible ink. Product Features Indelible ink is fast drying, hence can't be wiped once applied on Index finger cuticle and upper portion. Contains skin friendly composition. It has excellent resistance to water & soap solution to avoid removal after washing. It has excellent resistance to organic solvents; hence it can't be cleaned with solvents. It has excellent resistance to bleaching powder; hence it can't be discolored on skin. It conforms to IS : 13209: 1991 It has shelf life of 1 year under controlled conditions. Ink is available in Purple, Blue, Red & Green colors. The ink remains as a stain for a minimum period of 10 days & maximum 30 days after application. Product Research and Development Kores has a plant set-up to manufacture 1, 00,000 Bottles of the capacity 30 ml or 50 ml per day per shift of 12 hours, with its newly erected Automatic 16 heads filling machine. As such we are in a position to supply you any quantity within the time limit specified by you. We have a production capacity of Ink equivalent to 66 KL per month. List of Equipments used in our Factory: Planetary mixer for ink manufacturing Automatic Filling Machine Automatic Plugging Machine Automatic Induction Heat Sealing Machine Automatic Capping Machine R 8: D Facility We have a fully equipped R&D Laboratory duly approved by Government of India, Ministry of Science & Technology. The R&D team is lead by experienced doctorates (PhD.) having vast experience & exposure in Research & Development and the team comprises of qualified and experienced chemists having experience of more than 35 years. The Laboratory is equipped with the advanced instruments such as Prufako Machine, Centrifuge Machine, Muffel Furnace, Red-wood Viscometer & Bursting Strength Tester. Product Tests Various tests applied on the final product Drop Test Water Test Leakage Test Our factory is equipped with Quality Management System similar to ISO & our laboratory is under process of certification for ISO 9001:2000. Test Certificates Our Indelible ink passes the Laboratory tests as certified by : Indian Institute of Chemical Technology. National Test House, Alipore, Kolkata. Chemical Testing and Analytical Laboratory Packaging Special Indelible Ink is supplied in 5, 10, 25, 30, 50 and 100 ml and in any volume as per requirement in matt colored HDPEPP bottles. The ink should be put on the index finger skin above the root of the nail in such away that the ink spreads on the ridge between the skin and the nail of the fingers. Indelible ink bottles can be provided with a special applicator with bristle hair or only with the applicator. Special Indelible ink is ready to use after twisting off the screw cap and plug. Usage The ink should be put on the index finger skin above the root of the nail in such a way that the ink spreads on the ridge between the skin and the nail of the fingers. Ensure that particular point of the finger that you mark is free from the oilgrease and the ink mark is distinct. To give the best result, the ink has to penetrate the skin by absorption. The ink should not be rubbed off until at least thirty seconds after it has been applied. Our special indelible ink is irremovable from the finger at least for 72 hours after it is applied. Indelible ink is applicable by single process and dries up quickly. Indelible ink, after it is applied, cannot be removed from the elector's skin by washing, wiping or rubbing through use of water, soap, liquid hand-cleansing products, detergents, bleaching products, scouring products, alcohol, acetone or other organic solvents. It leaves a spot or mark that is easily visible by eye. It is sensitive to light. Our special indelible ink neither gives any harm nor irritates the skin. Do not expose the bottle too much to light or keep the bottle open for any length of time as the ink will dry or deteriorate otherwise. Our special indelible ink is suitable for 6 months storage in its closed package and should be stored in cool conditions. During this storage period, special inks and packages thereof maintain their characteristics. Transportation Details & Packaging Requirements Our Indelible Ink and related products satisfy all the Packing & Packaging requirements as laid down under "UN No. 1993 of Category III" for transportation by air. INDIAN INSTITUTE OF PACKAGING certifies the goods in accordance with the provisions of the ICAO on the Transport of Dangerous Goods and ICAO, Part-6 for the Transportation of "FLAMMABLE LIQUID, N.O.S (INDELIBLE INK)" having UN No. 1993 & Packing Instruction 305307. The goods fall under Non-Hazardous class for sea transportation and are not included in the International Maritime Dangerous Goods Regulations Code 2002. Various Applications of Our Indelible-Ink Products Our Indelible Ink Products have the following Applications : Election Purposes Pulse Polio Vaccination Programmes Census Other Identification Purposes Value Added Innovations 1. Sponge Bottle Kores understands the need of its customers well. To enable a voter to mark his Finger with Indelible-Ink (by dipping method) without dripping the finger while taking it out, we have developed a unique Sponge Bottle. This Sponge Bottle has a wide mouth with Wad Seal so as to prevent the leakage & drying of the Ink & has a Shelf-life of 6 months. Features : Special Sponge is used that soaks the excessive ink from the finger when it is removed from the bottle. The Sponge is non-reactive to the Indelible Ink. Available in : 5060 ml Plastic Bottles. 2. Indelible-Ink Marker Use the Ambassador Indelible-Ink Marker for a most convenient way to mark the finger. This marker is widely used during Pulse Polio Programme & Election purposes. Features : Ink loading is 5ml and one Marker can mark approximately 600 persons. Shelf life is maximum 6 months. Cap off time is 24 hours. 3. Invisible Ink Adding yet another feather to its cap, Kores has recently developed the Invisible Ink for Election Purpose. The skin friendly Invisible Ink, which is fast drying and resistant to water & soap, is visible only under UV Rays. Features : This ink gives satisfactory results that are the stain is not visible, when applied on finger cuticle, with normal vision but the stain impression is visible under ultra violet light and the stain impression can be seen even after 5 to 6 days on finger cuticle. Available in : 10, 25, 50 ml and special spray bottle. 4. Election Kit In an attempt to serve its Patrons in the most effective way, Kores has recently developed the idea of an Election Kit that has an extensive utility at the Polling Booths. This Kit contains all the products that are used on any Polling Station during Elections. The Kit contains the following products, all of which are manufactured at Kores factories. Black Permanent Marker. Five Ball Pens. Two HB pencils. Glue Stick - 25 Gms. 30cms Plastic Scale. Paper Punch KP-120. Stapler246 Eminent. Write & Stick Pad 3 Inches X 5 Inches, 100 sheets. Staple Pin No.246, 1000 Pins per Packet. Small Long Life Metallic Stamp Pad (51 mm x 95mm)

• Type: Marker
• Material: Plastic
• Application: in Ocean
• Weight: 10-15gm, 15-20gm, 20-25gm
• Ink Color: Orange
• Feature: Light Weight
• Quality: Best

The company is a renowned provider of a vast gamut of Ocean Markers. These are made from UV stabilized polyethylene that is rotationally molded shell filled with PU foam available for creating entry barriers. Our Ocean Markers are available along with multiple wire rope connection options. These Ocean Markers are highly appreciated for their high strength, light weight and durability. We provide these markers in internationally accepted colors like red, yellow, green and white. Applications Dam Protection Channel Markers Area Restriction Jetty Guides Dockyard entrance identification Estuary markers Industrial marine side entrance limiters Features Full Range of oval & round float buoys Standard can and float collar can buoys Navigational Buoys, Red/Green Channel Markers High quality Graphics No ABS, No caps

• Type: Permanent Marker
• Material: Plastic, Pvc
• Application: Home, Industrial, Institute, Office, School
• Weight: 10-15gm, 15-20gm, 20-25gm, 25-30gm

• Type: White Board Marker
• Application: Writing
• Feature: Erasable, Leakproof, Light Weight, Quick Dry, Refillable, Smooth Writing
• Ink Color: Black, Blue, Green, Red
• Ink Type: Temporary

Models available in four sizes for scribing circles up to 80" in diameter 40" radius. Folding type design three smallest models will fit conveniently into a shirt pocket. Sturdy friction joints maintain rigidity and accuracy, and are made from lightweight, rustproof aluminium for long wear. Soapstone crayon is included. The scribe holder will accept round, square or flat soap stone crayon, pencil or steel point scribe.  

• Type: Marker
• Material: Plastic, Pvc
• Application: Home, Industrial, Institute, Office, School
• Ink Color: Black, Blue, Golden, Green, Navy Blue, Red, Silver, Yellow
• Ink Type: Permanent, Temporary
• Feature: Erasable, Leakproof, Light Weight, Low Odor, Non Toxic, Quick Dry, Refillable, Smooth Writing
• Marker Length: 5Inch, 6Inch
• Brand Name: Camlin

Laser technology offers various methods for permanent marking and thus can be used in more diverse applications than conventional lettering methods. Whether metals, plastics, wood, or ceramics: nearly any material can be lettered, marked, or engraved permanently with a laser. advantages at a glance: · marking of different material types · high automation and speed · force-free and contact-free processing · sharp images of high quality · high design flexibility · cost reduction laser lettering can offer very good results even on rounded surfaces, and can be performed even on moving components (“marking on the fly”). Laser lettering can be generated quickly automatically and individually. Using this process, computer-aided control provides a large degree of flexibility for the form and content of the lettering. 1: scanner 2: objective 3: laser beam 4: work piece 5: marking alphanumeric characters, graphics, logos, barcodes, etc. Can be applied to components. Accordingly, laser lettering systems are used widely in the production of consumer goods and industrial products, in the automobile industry, machinery and plant assembly, and even for tool manufacture. Permanent signatures are guaranteed even under the effect of vapor, oils, emulsions, and other fluids. Extensive software packages equipped with graphics-based user interfaces are used for control of the laser system. They make it possible to create texts, fill objects, insert pictures, create serial numbers, and display movements of the scanner.

We are offering t shirt marker. Cotton updated stylish, reliable, plain , printed, half, full , polo neck, collar neck. we can supply in any model any design minimum pieces 20 nos.

 Median marker Flexible Median Marker

• Material: Plastic
• Application: Writing
• Weight: 25-30gm
• Feature: Light Weight, Low Odor, Non Toxic
• Ink Color: Black
• Bullet Tip Width: 1.5-2mm
• Marker Length: 7Inch
• Brand Name: RADIUS

• Properties: The Basis of Surgical Instruments
• STAINLESS STEEL: BROWN FINISH
• Packaging Details: SECURED EXPORT WORTHY PAKAGING
• Place of Origin: Maharashtra, India
• Port: MUMBAI

• Material: Plastic
• Weight: 10-15gm
• Ink Color: Black, Blue
• Feature: Light Weight, Smooth Writing
• Marker Length: 5Inch
• Brand Name: Camel