Mass Mixer Dealers in Marol, Mumbai

SALIENT FEATURES * All contact parts are made out of S.S.304316M.S quality material. * Compact design requires comparatively smaller floor space. * Single blade with single speed for dry & wet mixing. * Proper sealings arrangement is provided to eliminate any black particle contamination problem, leakage, wear & tear. * All moving parts are enclosed with safety guards.

The Mass Mixer is ideally suitable for mixing of wet mass, dry powders with wet mass, etc. for the preparation of pharmaceutical mass for the preparations of tablets.   Salient Features: The trough design is such as to evenly distribute the material throughout. The unique blade design and placement facilitate in the mass moving completely from top to bottom and laterally from one end to the other without operator interference. The open top design is suitable for addition of material while in operation and also for visual inspection. The complete trough can be tilted for unloading of the material. RaviKiran are Manufacturers of Paddle Mixer, ideally suitable for mixing of wet mass, dry powder, dry powder with wet mass, etc, for the preparation of pharmaceutical mass for preparing tablets and similar other applications. The mass mixer gives through mixing due to its unique blade design and the angle of the blade. Granulation Line:- Mass Mixer and Ribbon Mixere ideally suitable for mixing of wet mass, dry powders with wet mass, etc. for the preparation of pharmaceutical mass for the preparations of tablets. Description: The mixer is provided with a U shaped trough with a centrally mounted shaft passing laterally through the trough. The shaft is provided with a set of blades welded at different angles each blades has a dedicated mixing function. The angle of the blades is such that through, efficient and complete mixing of the material takes place. The material due to the unique blade design is subjected to lateral as well as vertical motion and the complete material is rolled inside out and for bottom to top, due to which complete mixing takes place and a homogenous mass is obtained. The control shaft is provided with gland packing at both ends for complete sealing. The central shaft is coupled to a suitable gear box and a suitably powered motor. The complete assembly is mounted an bearing blacks bolted to the frame of the machine. The machine is provided with a manual tilting mechanism of the side with gear mechanism for unloading the material into the collecting tray (motorized tilting for higher capacity models available as an option). The trough can be tilted in the front up to 90 Degrees by rotating the handle provided at the side. The mixer is provided with a sliding and open able top cover with safety guard so that the operator does not accidentally put the hand inside the trough when the machine is in operation. The top cover is provided with a limit switch to stop the machine as soon as the top cover is opened. Salient Features: The trough design in such as to evenly distribute the material throughout. The unique blade designs and placements facilitate in the mass moving completely from top to bottom and laterally from one end to the other without operator interference. The open top design is such that addition of material while in operation and visual inspection is possible. Limit switch provided for the top cover to stop the machine when the cover is lifted.

  General Specification: Shell : Consisting of ‘U’ trough of suitable dimensions. Construction of  S.S and side plates duly M.S stiffened from outside and from inside with S.S. Mixing Mechanism : Paddle type blades welded to the main shaft provide for efficient mixing of thick heavy material. PTFE gland mechanism provided at shaft ends prevents ingress of external powder into the trough and prevents leakage. Charging : From the top charging can be done through hingeable lid, Hopper or Nozzle can be provided for additional spraying of additives. Discharge : By bottom discharge slide Iris or Butterfly valve of suitable diameter, for regulated discharge. Drive : Consisting of suitable HP TEFC 3 phase ac 415v / 50 cycles motor  coupled to suitable worm gear, with driving shafts mounted on suitable plummer block. Mounting : Mounted on suitable ISMC Section Stand, with protective covers for belts and couplings. MOC : All contact parts in S.S construction. Complete unit with S.S. cover and all surfaces polished to mirror dull finish. MS parts dull painted to smooth finish.   Options Available :  The control panel is mounted on platform and is provided.                                                                                                          1.                                      

The Mixer consists of mixing drum complete in itself. It contains a mixing drum body, mixing paddle and sealing arrangement. The drum rests on rigid M.S. fabricated body carrying motor, gear box, starter and tilting arrangement. The drive of mixing paddle is through suitable oil filled worm gear unit which in turn gets drive through V belts from a suitable T.E.F.C. motor. The blades of the paddle are so arranged that thorough mixing is obtained. All parts which are in direct contact with the material to be mixed are of S.S. or neutral material. The main paddle runs in journals and supported by thrust bearings of ample size to carry rigid and thrust load. The whole drum of the mixer makes for ease of cleaning. The rotor is so designed that it can be removed by removing the main shaft without much problem.   ADDITIONAL FEATURES: • Plastic Dust Cover provided to see the process all the times. • Safety : If motor covers open it will trop off automatically. • Tilting Device is provided to ease the unloading of the material Specially designed self-adjusting sealing arrangement Provision is made for lubricating all moving parts  

• Ideal For Mixing Dry & Wet Material. • Paddles Type Blades So Arranged On The Shaft To Give Through Uniform Mixing Of Thick Heavy Material. • The Drive System Is Through Suitable Worm Gear And Motor. • Provision For Tilting Arrangement , Reversible Switch And Safety Lock-switch To Stop The Mixer As Soon The Cover Is Opened. • PTFE Gland Mechanism Provided at Shaft ends to Prevent Inner Leakage. • The Mass Mixer Is Also Provided With A Lever With Hand Wheel To Accomplish Tilting Manually.

• Brand Name: RIDDHI
• Weight: 300 to 500 kg
• Capacity: 50-200 kg
• Model: RDMM
• Design Type: Standard
• Max. Mixing Mass: 50,100,150,200,300 kgs
• Drive Motor Power: 2 hp to 10 hp

SUITABLE FOR MIXING WET AND DRY POWDERS PADDLE TYPE BLADES PROVIDED WITH LEAK PROOF SEAL TILTING ARRANGEMENT, LIMIT SWITCH WITH S.S. GRILL S.S. 304 316 QUALITY AND MIRROR POLISHED UNIT WITH SUITABLE MOTOR AND GEAR BOX MANUAL TILTING ARRANGEMENT MODEL 25, 50, 100, 200 & 250 Kgs. CGMP MODEL WITH DOCUMENTATION (IQ, DQ, PQ, OQ) - AS OPTION

• Features: All CGMP models.High In performance.Effective Blending.WIP inbuilt for cleaning.Spray nozzles for liquid introduction.Dimpled or baffled jackets for heating or cooling.
• Applications: Food Industry.Pharma Industry .Construction Industry. Chemical Industry. Cosmetic Industry.

Mass Mixer Machine, Sigma Mixer Machine, Flaker machine, Octagonal Blender

Mass Mixer, Polishing Pan, tanks vessels, Tray Dryer, Vacuum Tray Dryer