Mass Transfer Products Industries Goregaon East, Mumbai, Maharashtra

We are offering wire gauze. This type of packing consists of parallel perforated corrugated sheets of wire mesh. These packing work on capillary action that ensures complete wetting of surface hence providing low hetp. Available in two models mibx-402 having 500m2m3 specific surface area and micy-403 having 750 m2m3 specific surface area.

Valve Trays have caps over the perforation on the trays. These caps are either fixed or floating. Fixed valves are set at a defined height and remain in open condition. The floating valves are either circular or rectangular and move up and down based on the vapour pressure. Floating valve trays are more efficient than fixed valve trays.

These distributors are meant for large column diameters. Liquid gets evenly distributed to various troughs through a common parting box / in built sump and is further distributed from drip points. The space between the trough is available for vapour passage. Drip points can be on the wall or on the base of the troughs.  

Sieve Trays consists of flat perforated deck. Passage for the vapours is through holes provided. The vapour pressure is such that it prevents liquid into the perforation. These trays have good capacity and moderate efficiency. Sieve Trays have low maintenance cost.

The first scientific tower packing developed for the chemical industry, still finds its use in certain industries involving fouling and scaling.

The slotted wall construction of the Pall Ring makes the inside surface accessible and provides a large number of interstitial points. The results are high mass transfer and high voidage.

Unlike ring type Packing, the unique geometry takes advantage of both saddles as well as ring type packing with large number of transfer points and very high voidage. These Packing operate at lower liquid flow, offer low HETP and high turned down ratio which make them suitable for distillation columns at high pressure as well as in vacuum.

Unlike other ring type packing, MTPI Mini Pack has height to diameter ratio of approximately 0.3. Due to this lower height to diameter ratio, rings tend to orient flat in the column resulting in greater surface area. MTPI Mini Pack is manufactured with positive locking of the ends which ensures very low distortion, resulting in constant optimal performance.

The MTPI AM Pack is a modified version of pall rings with flared edges so that thinner gauge materials can be used, giving sufficient strength. These rings offer low pressure drop and more effective transfer points due to its internal geometry.

Towers with small diameters, prohibiting installations of trays though man holes require Cartridge Trays to be installed. These trays are connected together to form bundles for easy installation. These can be sieve trays, valve trays or bubble cap trays as per system requirements.

These trays consist of deck with fitted risers on which, inverted caps are fixed keeping a gap for vapour passage. This results in greater pressure drop. Bubble Cap Trays are used for low liquid loads & very high turn down ratios.

The mtpi am pack is a modified version of pall rings with flared edges so that thinner gauge materials can be used, giving sufficient strength. These rings offer low pressure drop and more effective transfer points due to its internal geometry.