Material Testing Equipment Dealers in Goregaon, Mumbai

• Measurement Range: 0-100HA(HD).
• Measurement Deviation: < 1%H.
• Test scale: Shore Hardness.
• Standards: DIN53505, ASTMD2240, ISO7619, JISK7215.
• Resolution: 1.
• Operating Conditions: 0oc to 40oc.
• Weight (not including probe): 200g.

Shore A is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials With test Piece.Dual Needle helps to take the reading after removing from the work piece. Technical Details :

These Riffle Sample Dividers are designed for rapid collection of true representative samples from aggregates, sand and fillers. Consist of a metal box fitted with a series of chutes of equal width, which discharges the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid following of the material.

  Introducing a new generation single column high precision materials testing machine, the LS1 is designed to measure forces up to 1kN    LS1 machine features include: High mechanical stiffness for highest precision displacement measurement. A wide speed range 0.01-2032mm/min for faster testing and higher productivity. Exceptional load accuracy – fewer loadcells required to cover the full load range saving time and cost. Simple to set-up, Operate & Maintain. A variety of control options possible for your convenience: stand alone operation via   a control console, alternatively using a PC or laptop and our acclaimed NEXYGENPlus analysis software. Hemetek Back up calibration services -NABL (ISO/IEC 17025:2005) accrediated for on site calibration. Uses Highly accurate gold standard load cell for calibration to maintain the accuracy & reprodicibility of equipment.   Ideal for routine quality control testing or complex multi-stage tests, this versatile material tester can perform a wide library of tests including tensile strength, compression, flexural, peel, shear, static and kinetic coefficient of friction and many more across many industries. Combined with our extensive range of grips, fixtures, extensometers and software to match your application, creates a powerful new generation materials testing system.   Anything you ask for mechanical tests, LS1 delivered.

• Features: Consumption resistance, High usefulness, Longer administration life, Simple support, High-productivity

• length: 305 x 25 mm

The drying time is calculated from the distance travelled, measured using a graduated rule along the edge, corresponding to the various stages observed on the trace. Automatically stops at the end of travel. A needle carrier holding six hemispherical ended needles travels the length of the six 305 x 25 mm test strips in 6, 12 or 24 hours.

Industrial Drying ovens are used across a range of industries and research laboratories for simple applications, such as drying and sterilizing glassware, to complex processes that require controlled heating and temperature uniformity such as bonding and curing. Temperature inside drying oven is controlled with a sensitivity of +1Deg.C or better. Indirect heating from three sides is provided with the help of air heaters. It is a technologically advanced and operator friendly solution which ensures uniform drying to consistently produce high quality product and also reduces product drying time compared to traditional drying methods.