Material Testing Equipment Dealers in Sion, Mumbai

• Application: Laboratory
• Color: Black
• Model Name/Number: surface roughness
• Packaging Type: Box
• Display Type: Digital
• Phase: single phase
• Minimum Order Quantity: 1 Piece

• Weight: about 420 g
• Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
• Evaluation length: 1
• Maximum driving stroke: 17.5mm/0.7inch

Digital Surface Roughness Tester is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters. FEATURESThis instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanisminside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.   * Very easy to operate * Multiple parameter measurement: Ra, Rz * Highly sophisticated inductance sensor * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and analysing by the optional cable and the software for RS232C interface. *Manual or automatic shut down. The tester can be switched off  by pressing  the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last  key operation.   SPECIFICATIONS:-   Display： 4 digits, 10 mm LCD, with blue backlight Parameters:  Ra, Rz Display  Range: Ra:   0.05-10.00um/1.000-400.0uinch Rz:   0.020-100.0um/0.780-4000uinch Accuracy: Not more than 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 10um Material of Probe Pin: Diamond Measurement Force of Probe: 16mN(1.6gf) Probe Angle: 90° Vertical Radius of Guiding Head: 48mm Driving speed: sampling length = 0.25mm   Vt=0.135mm/s sampling length = 0.8mm    Vt=0.5mm/s sampling length = 2.5mm    Vt=1mm/s returning                                Vt=1mm/s Resolution : 0.001μm    if reading ＜10μm 0.01μm    if 10μm≤reading＜100μm 0.1μm    if reading ≥100μm Power Li-ion battery: rechargeable Operating conditions:  Temp. 0-50℃ Humidity

• Country of Origin: India
• Type: Shore Hardness Tester
• Color: White
• Corrosion Resistance: Yes
• Display Type: Analog

• Type: Surface Roughness Tester
• Color: Multicolor
• Feature: Easy To Use
• Application: Industrial, Measure Workpiece
• Warranty: 1year
•  Certification: ISI Certified
• Temperature Capacity: High Temperature
• Shape: Rectangular

The company is affianced in importing and supplying preeminent quality Surface Roughness Tester from Maharashtra, India. The Rubert Chart that we deal in is precision engineered and intricately designed. It is accurate in measuring the roughness of the particular surface. Ours is a Digital Roughness Tester that efficiently delivers even the minutest of the results. The Surface Roughness Tester, offered by us, is obtainable at the best market prices.

Digital Surface Roughness Tester is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters. FEATURESThis instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanisminside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.* Very easy to operate   * Multiple parameter measurement: Ra, Rz * Highly sophisticated inductance sensor * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and analysing by the optional cable and the software for RS232C interface. *Manual or automatic shut down. The tester can be switched off  by pressing  the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last  key operation.   SPECIFICATIONS:-   Display： 4 digits, 10 mm LCD, with blue backlight Parameters:  Ra, Rz Display  Range: Ra:   0.05-10.00um/1.000-400.0uinch Rz:   0.020-100.0um/0.780-4000uinch Accuracy: Not more than 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 10um Material of Probe Pin: Diamond Measurement Force of Probe: 16mN(1.6gf) Probe Angle: 90° Vertical Radius of Guiding Head: 48mm Maximum driving stroke:  17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm  optional Evaluation length:  1~5 cut off  optional Driving speed: sampling length = 0.25mm   Vt=0.135mm/s sampling length = 0.8mm    Vt=0.5mm/s sampling length = 2.5mm    Vt=1mm/s returning                                Vt=1mm/s Resolution : 0.001μm    if reading ＜10μm 0.01μm    if 10μm≤reading＜100μm 0.1μm    if reading ≥100μm Power Li-ion battery: rechargeable Operating conditions:  Temp. 0-50℃ Humidity

• Weight: 1-2 kg
• Power: 2-4 Hp
• Voltage: 220 V
• Capacity: 200-500 gm
• Frequency: 50 Hz

• Type: Front Loading
• Certification: CE Certified
• Application: Industrial
• Weight: 1-5 Ton
• Voltage: 380V
• Warranty: 1 Year

• Features: Reliable performance , Easy operation , Less maintenance

We are instrumental in offering our clients a comprehensive collection of Rubber Hardness Testers that are widely appreciated by the clients due to their durability, reliability, easy operations and accuracy in results. Our team of quality controllers checks and tests the entire range on several parameters to ensure that only quality products are delivered at clients. Furthermore, we pack our entire range on several parameters to keep it safe and secure during transit.

• Type: Rubber Hardness Tester
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Voltage: 110V, 220V
• Frequency: 50Hz, 60Hz
• Power: 1-3kv, 3-5kv
• Warranty: 1year
• Condition: New, Used
• Application: Labouratory Use
• Feature: Durable, Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish
• cetification: ISI Certified
• Temperature: High Temperature, Low Temperature, Medium Temperature

standard compaction test, Frame Sieve, Tilting Level

Spacy Vacuum Fuel Pump Tester, Torque Wrench

MGW Surface Roughness Tester, SRT 1, MGW Digimatic Indicator