Measurement Gauge Dealers in Jogeshwari West, Mumbai

Sealexcel Flow Control Regulator, The temperature rating of a flow regulator valve has been designed to withstand the system temperature effects of up to around 120O C Our flow control regulator units are designed with special operating parameters to withstand a pressure rating up to 10 bar.

• Size: 1
• Type: Gauges
• Material: Mild Steel, Stainless Steel, Pp
• Application: Liquid Pressure
• Color: Grey
• Feature: Accuracy, Easy To Fit
• Pressure: 0-5000psi
• Connection: Side mounted/top mounted
• Liquid Pressure: 0-500bar
• Gas Pressure: 0-500kg
• Country of Origin: India
• Connection: Flange/tc/thread

• Brand Name: EMERSON, EMERSON
• Material: Cooper, STEEL
• Shape: Round, CIRCLE
• Color: Brown
• Certification: ISO 9001:2008
• Feature: Heat Resistance
• Type: Non Stick Pressure Cooker
• Warranty: 2years
• Country of Origin: India
• Handle Material: Plastic
• Pattern: Printed
• Capacity: 35-40ltr
• Handle Length: 5inch
• Surface: Non Coated

We are manufacturing, exporting and supplying Flatness Gauge to our esteemed clients. The Flatness Gauge is mainly used to monitor a lapping plate�s flatness and to give an indication of the flatness the plate will produce on a given part size. Our Flatness Gauge comprises of calibrated double-sided master setting block and is supplied along with instruction details. Features 1 Micron Accuracy Suitable for lapping plates 14� (355mm) to 24�(609mm) diameter Recalibration service available

• Feature: • 1 Micron Accuracy • Recalibration service available

The Lap shine Flatness Gauge is used to monitor a lapping plate’s flatness and to give an indication of the flatness the plate will produce on a given part size. The Gauge comes with a calibrated double-sided master setting block and is supplied complete with instructions in a fitted case.

• Tank height/Range: 0 to 15 mtrs Without Wire Rope Guide Assembly Above 15 mtrs With Wire Rope Guide Assembly
• Design Temperature: Up to 150°C
• Design Pressure: Up to 1 Kg/cm2
• C/C Distance: Flanged to ASA/BS/DIN/ Socket Weld/ Butt Weld
• Connection: MS / CS / SS304 / SS304L / SS316 / SS316L / PP / HDPE

Float & Board Type Tank Level gauge (indicator) suitable for large non – pressurized liquid storage tanks vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304S.S.316P.P.Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

It is commonly used for visual level indication of liquids, which attack glass or are hazardous, flammable, toxic, aggressive, agitated, contaminated and under high temperature & Pressure i.e. for services where glass gauges are unsafe. Features :Rugged gland less construction to provide safety in handling toxic, flammable & highly corrosive Liquid. Suitable for glass attacking liquid, where conventional gauge glass can not be used Construction & Operation :It consists of a chamber and an internal float in non-magnetic material compatible with the liquid. The float containing a magnetic system rides on liquid level and is coupled to an external visual indicator, which comes in two options. The simnpler & economical design consists of a RED magnetic follower Capsule, that moves within a glass tube Filled with water (to reduce friction) and can be read against a scale. The Other system is expensive and consists of a series of Bi-colour flappers. White on front side and contrasting RED on the reverse. These flappers rotate corresponding to float movement, thus changing their colour from white to red as the float rises and vice-versa when the float falls. As such the liquid represented by an external RED coloumn. Operating Principle :These models consist of Bi-coloured magnetic rollers equipped with small rod magnets which are rotated one after another at an angle of 180o by the directed field of the Permanent magnet inside the float.In addition, Level sensing elements can be fixed directly to the float cage, so that simultaneously liquid level is electrically measured through smart transmitter with output of 4-20mA. It is possible to connect Level indicating Meters and Set Point Relays at any distance for control and display purpose. The Magnetic Level transmitters can also be supplied with HART PROTOCOL.Moreover it is possible to attach bistable Magnetic Switches to the Magnetic Level indicator in order to get switching at any desired liquid level.

• Dial Size: 2inch, 4inch, 6inch, 8inch
• Type: Pressure Gauges
• Material: Mild Steel
• Diameter in mm: 20-40mm, 40-60mm, 80-100mm
• Shape: Round
• Application: Liquid Pressure, Measuring Gas
• Color: Silver
• Display Type: Analog
• Operating Mode: Automatic
• Specialties: Accuracy, Easy To Fit, Measure Fast Reading
• Liquid Pressure in Bar: 1000-1500bar, 1500-2000bar
• Pressure: 10000-15000psi, 15000-20000psi, 5000-10000psi

We offer seemag magnetic gauge. The seemag gauge meets the requirements of solas (safety of lives at sea), and is also type approved by many worldwide shipping authorities including; det norske veritas (dnv), rina, lloyds register of shipping, american bureau of shipping (abs) and germanischer lloyds.

Specially designed for controlling the flow rate of fluid. Eliminates the need of expensive electronic I.V. pumps. Gentle gravity drive is self correcting. Wide dial operates as thumb wheel like roller clamp. Security door provided to prevent the accidental change of flow rate. Low cost disposable set provides maximum safety, traditional grip, shape and feel of old roller clamp. Sterile, individually packed in peelable pouch. Category reference code SS-3070

• Brand Name: Adarsh
• Material: Stainless Steel
• Certification: ISO 9001:2008 Certified
• Display Type: Digital & Analog
• Packaging Type: Corrugated Boxes
• Connection: Bottom Connection, Back Connection
• Dial Size: 2 Inch, 4 Inch, 6 Inch
• Display Size: 1/2 Inch, 1 Inch, 2 Inch
• Type: All Types
• Warranty: 1 Year

Make from high quality aluminium casting presion machined for uniform air flow used up to die size 400 mm.

Applications   Also known as over pressure protectors are used to protect the pressure gauge from over pressure. The gauge saver has a predefined setpoint at which it will not allow any media to flow. The setpoint can be varied for a max span of 10% of set pressure. Available for set pressure ranges from 1000mmwc (0.1 kg/cm2) upto 600kg/cm2.    Features   4 Material SS316 4 3/8”, ½” bsp or npt connection 4 Suitable for Pressure Range from 1000mmwc upto 700 kg/cm2

Gauge fittings FEMALE THREAD : BSP (Parallel with DK Seal Ring), For Viton: Suffix code 'V' alongwiththe part number of the fittings.

SS Case-Brass Internals Gauges are not corrosive to brass but require SS Case for external corrosion protection where Mild Steel Case is not suitable.Brass Working Parts - Bourdon, Socket & Movement.

• Size: 171 x 50 x 48.8 mm
• Test time: 3 seconds
• Light source: C-light source
• Sensor: Correct silicon photodiode carrays
• Power: 2 batteries 1,5 Volt
• Weight: 210 g

Colour Display data in CIE_Lab ΔL, Δa, Δb, CIE_Lch Test Time is 3 seconds Test Angle CIE 10 Degrees

Radix manufactured Pressure sensors are specially designed fot the optimal solution for the widest range of applications, there is a choice of measuring systems in Bourdon tube, diaphragm element and capsule element technologies. For the various requirements in industrial and process instrumentationthere are pressure elements in copper alloy, stainless steel or special materials available. These instruments cover scale ranges from 0 … 25 mbar to 0 … 1000kgs , and indication accuracies of up to 0.1 %.