Measurement Gauge Dealers in Marine Drive, Mumbai

• Tipping bucket rain gauge: Precipitation measurement
• Unlimited- tipping action dumps precipitation from bucket: Any Symphonie logger equipped with a Rain Gauge SCM Item 3149
• Switch closure (momentary single pole, normally open (SPNO) contact), typical closure time is 0.1 second: 0.254 mm (0.01 inches) of rain per switch closure
• +/- 2%, up to 50.8 mm (2 inches) per hour: Factory calibrated
• 0.254 mm (0.01 inches) of rain: Requires regular cleaning to ensure proper operation Recalibration is only necessary if the sensor is physically damaged

The Tipping Bucket Rain Gauge provides inexpensive and accurate rainfall measurement.   Specifications  Rain Gauge - Tipping Bucket (#2226) Description Sensor type Tipping bucket rain gauge Applications Precipitation measurement Sensor range Unlimited- tipping action dumps precipitation from bucket Instrument compatibility Any Symphonie logger equipped with a Rain Gauge SCM Item 3149 Output signal Signal type Switch closure (momentary single pole, normally open (SPNO) contact), typical closure time is 0.1 second Transfer function 0.254 mm (0.01 inches) of rain per switch closure Accuracy +/- 2%, up to 50.8 mm (2 inches) per hour Calibration Factory calibrated Resolution 0.254 mm (0.01 inches) of rain Drift Requires regular cleaning to ensure proper operation Recalibration is only necessary if the sensor is physically damaged Power requirements Supply voltage Excitation Supply 5 V DC to 12 V DC typical Overvoltage protection clamps at 27 V DC Supply current Dry contact, 0.5 A maximum Installation Mounting Three mounting legs with bolt holes Holes are 6.3 mm (0.25 inches) diameter on a 241 mm (9.5 inches) diameter circle Environmental Operating temperature range 0 °C to 45 °C Physical Connections 2 conductor cable from switch (red wire, black wire) Cable length 7 m (24 feet) Dimensions 360 mm (15 inches) overall assembly height 203 mm (8 inches) diameter catchment area Materials Enclosure Anodized and powder-coated aluminum, thermoplastic, stainless steel fasteners   Precipitation is collected in a funnel and measured by the calibrated tipping bucket. For each 0.254 mm (.01") of precipitation, the bucket tips, empties, and activates an output switch. The rain gauge tipping bucket mounts via three mounting legs with 6.3 mm (.025") diameter holes on a 241 mm (9.5") diameter circle. This kit includes 7 m (24') of cable as well as the mounting platform and pipe to install this sensor next to your meteorological tower.

we are an eminent manufacturer and supplier of oil level indicator. made in accordance with international standards, our oil level indicator can be availed in different sizes and lengths. our sockets are manufactured using quality material and are offered at industry leading prices. these products are extensively demanded in numerous industrial applications across the nation. features: quality tested compact design longer functional life glass tube : borosil make washer : oil and heat resistance nitrile rubber tube length : 2" to 24

• Shape: Round
• Material: Stainless Steel
• Accuracy: 0.001 to 0.002 inch
• Application: Laboratory
• Meter Type: Analog
• Surface Finish: Carbide
• Resolution: 0.02 mm

• Material: A105, A276 SS304, A276 SS316, Monel
• Test Pressure: 25 deg Room temperature
• Pneumatic: Body - 420 kg / cm2
• Gland Seal: Buna
• Finish: CS zinc plated and dichromated, SS – Natural
• Pack Type: Paper Packet

The adjustable pressure gauge snubber drawa unique taper. pin / Orifice design for high range of damaging. The damping can be adjusted the fluid and the pulsation.

• Range: UP to 30 meters
• Process Connection: 1”  FLANGED AS PER ASA 150 RF
• Pressure Rating: UPTO 5KG/CM2
• SPECIFICATIONS: Our Model No : TL-121
• CONNECTIONS: Flanges ASA 150# 300 or threaded
• FLOAT: 304 S.S/ 316 S.S / P.P / TEFLON 
• FLOAT WIRE: 304 S.S/ 316 S.S/ PP,  MULTISTRANDED
• PULLEY HOUSING: ALUMINIUM / P.P / S.S
• SCALE: ALUMINUM SCREEN PRINTED WITH WHITE BACKGROUND BLACK LINEING
• ROPE / WIRE: 304 S.S / 316 S.S /P.P
• GRADUATIONS: LINING AT EVERY 1CMS & NUMBERING AT EVERY 10 CMS
• HORIZONTAL PIPE: TELESCOPIC DESIGN OF M.S/ S.S
• PULLEY: M.S / 304 S.S / 316 S.S /P.P
• POINTER: M.S/ALUMINNUM  WITH NYLON ROLLERS FOR EASY GLIDING
• TEMP RATING: UPTO 100’c

We are renowned manufacture and exporter of qualitative range of glycerin -filled pressure gauge. Widely demanded, these pressure gauge are ideal for dampening the effect pulsation and vibration. The gauge has a stainless steel case which is filled with gylcerin to offer protection against harsh environments. It also enhances the integrity as well as reliability of measuring system for long periods under extreme operationg condition. The gauge find application in :  Marine Engines  Pumps  Air Compressor  Hydraulic Presses  Industrial Power Plants  Pipelines and Transmission Stations Standard feature of the product are as follows:  Ranges: Pressure up to 1400kg /cm, Vaccun Compound Ranges  Size 63mm, 100mm & 150mm  Accuracy : +2% / 1% of full scale  Case & Bazel (IP-65): S.S 304 Crimp Type, Snap action bayonet type.  Wetted Parts: Stainless Steel    Mounting: Direct the bottom entry, direct with the black entry flush panel with back entry (Three panel, Bracket) Surface with bottom entry.

we are offering Precision test pressure gauge.

• Material: Stainless Steel
• Shape: Round
• Color: Silver
• Certification: ISI Certified
• Display Type: Analog
• Connection: Bottom Connection
• Type: Gauges
• Country of Origin: India
• Specialties: Rust Proof
• Battery Included: No

Basic tank level measuring instrument used by process plants & OEMS. Various Models are available as per mounting and design features.

• Resolution: 1µm(0-99.9µm), 1 µm(over 100µm)
• Power Supply: 5V AA Size Batteries
• Display: 4 Digit Display (10mm LCD)
• Measuring Range: 0-1000um (0-40mil)
• Accuracy: ±1-3% or ±2.5um (Whichever is the Greater )
• Operating Principle: Non Magnetic Induction (NF)
• Measuring area: 10.7mm
• Operating Temperature & Humidity: 0⁰C to 50⁰C,≤80%RH
• Calibration: Self Calibration
• Battery Indicator: Low Battery Indicator
• Buttons: 5 Buttons
• Display Size: 41 X 23 mm
• Weight: 260g Including Batteries
• Dimension: 161x69x32 mm(6.3×2.7×1.2 inch)
• Accessories: Carrying Case, Operational Manual, NF probe, Calibration Foil,

• Size: 6inch, 8inch
• Type: Gauges
• Material: Mild Steel
• Certification: ISI Certified
• Application: Liquid Pressure, Measuring Gas
• Color: Available in Many Colors
• Display Type: Digital

Get in touch with us for acquiring top of the line quality Push Pull Guages! We have tie-ups with the known manufacturers who make use of premium metal so as to enhance the quality and durability. Our Pushpull Gauges contain an electronic part, software and a display. It is extensively used to convert a force into an electrical signal. We make available Push Pull Gauges of different brands like IMADA, INSIZE & YUYUSTU. They are provided by us at the market-leading prices.

• Display Type: Analog
• Model Name/Number: FB / FS series
• Brand Name: Imada
• Measuring Range: 10N - 500N
• Packaging Type: Box
• Usage/Application: Laboratory
• Accuracy: +/-0.3% F.S.
• Stroke: 10mm
• Unit of measurement: Please refer to the table below
• Reading method: Real-time track or Peak-hold
• Divisions: 100lines*
• Operating temperature: 0 to +40 degree Celcius
• Weight **: Approx. 630g(FB-100N)
• Accessory: 6 kinds of attachments,Inspection certificate, Instruction manual, Carrying case

• Country of Origin: India
• Type: Syphon
• Material: Stainless Steel
• Shape: Round
• Certification: ISI Certified
• Application: Industrial
• Color: Grey
• Finishing: Polished

We offer our clients coating thickness gauge for Ferrus & non metals only, which are in compliance with the industry standards. These gauges are majorly used in furniture making as these are efficient in holding two wooden parts strongly together. Further, our gauge can be availed in bulk quantities as we maintain huge stocks. For our clients, we can deliver quality products within the shortest span of time. APPLICATION: Used for Measuring Thickness of Non Magnetic Materials (Paint, Plastic, Porcelain Enamel, Copper, Zinc, Aluminium, Chrome etc.) on Magnetic Material (Iron, Nickle ) SPECIFICATION: Display: 4 Digit Display (10mm LCD) Measuring Range: 0-1000um (0-40mil) Accuracy: ±1-3%n or ±2.5um(Whichever is Greater) Resolution: 1µm(0-99.9µm), 1µm(over100µm) Operating Principle: Magnetic Induction (F) Measuring Area: 10.7mm Operating Temperature & Humidity: 0°C to 50°C,≤80%RH Calibration: Self Calibration Auto Power Off Battery Indicator: Low Battery Indication Power Supply: 4×1.5V AA Size Battery Buttons: 5 Buttons Display Size: 41×23mm Weight: 260gm including batteries Dimension: 161x69x32 mm (6.3×2.7×1.2 inch) Accessories: Operational Manual, Probe, Calibration Foil, Carrying case, Substrate block.

• Material: Stainless Steel
• Display Type: Digital
• Warranty: 1 Years
• Automation Grade: Manual
• Battery Life: 8 Hours
• Height: 1 feet
• Operated: Battery

• Type: Spirit Level
• Material: Metal
• Feature: Dimensional
• Application: Industrial, Workshop
• Certification: ISI Certified
• Brand Name: Taparia

TAPARIA Spirit levels • Have precision milled base for high accuracy. • Have a solid spirit bulb which doesn't break easily. • Are special and lasts for a long time. • The Aluminum frame is strong and precision extruded which increases accuracy and strength of the Spirit levels. • Rubber moulding is provided on the sides of the spirit levels to prevent damage to the body of the spirit levels. • Available in two ranges i.e. lmm/meter accuracy and 0.50mm/meter accuracy to cater to regular and high precision requirements.

Our material handling procedure is very well managed by a team of experts and thus we ensure zero damage of the stored products stocked in our capacious warehousing unit. As we have the fastest transit facility, we are capable of delivering the orders within the postulated time.

• Application: Industrial
• Brand Name: Kulaipu
• Weight: Up to 600 gm
• Usage: Car Tool
• Packaging Type: Box
• Pressure Range: Up to 150 psi
• Minimum Order Quantity: 1 Piece

Hailing from Mumbai(India), we are catering to the nationwide requirement with our superior products. Backed by a well-organized and structured storage unit, we efficiently store the entire array of products in a secured manner. Furthermore, we ensure total security of the products.

• Application: Industrial Use
• Feature: Easy To Fit, Optimum Quality
• Condition: New
• Surface Finishing: Coated
• Shape: Round
• Pattern: Plain

chemtech alloys pvt ltd manufactures of tapered tube plugs used to stop leaking heat exchanger tubes and extend the life of the heat exchanger. our smooth surface finish will provide a positive seal stopping the leak. stainless steel (316), brass (360), and carbon steel (1214) are in our stock ready for immediate shipment. we are one of the leading manufacturer, exporter, supplier & stockist  of stainless steel tapered tube plugs which are used in heat exchangers, condensers, boilers, coolers, etc. we offer tapered plugs of different sizes and materials for tubes having od of 1/4″ up to 4”. we can even offer customized sizes of stainless steel tapered tube plugs as per client’s requirements. we have a ready stock of a wide variety of tapered tube plug to cater your huge requirement.solitaire overseas is known for providing high-quality plugs manufacturers and for its quick and timely delivery. we export and supply  tapered tube plugs all over the world. sizes: tube plugs are sized to fit tube diameters from 1/2 through 1 in. with standard wall thicknesses of ■ 11 through 14 gauge ■ 12 through 17 gauge ■ 15 through 20 gauge based on birmingham or stubs gauge system. other sizes are available on request. materials: tube plugs are available in a variety of materials for system compatibility. ■ alloy 400/astm b164 ■ alloy 600/astm b166 ■ brass 360/astm b16 ■ 1214 carbon steel/astm a108 ■ 316 stainless steel/astm a479   types of tube plugs. heat exchanger tapered tube plugs, brass tapered tube plugs, stainless steel tapered tube plugs, tapered boiler tube plugs, tapered tube plug dimensions, tube plugs, steel tube plugs, tube plugs for heat exchanger, tube plugs heat exchanger, tube plugs brass, tube plugs rubber, tube plugs for condensers and heat exchangers, tube plugs suppliers, square tube plugs, boiler tube plugs, elliott tube plugs, tube plugging, g tube plug, tube plug, tube plug design, tube plug dimensions, tube plug swagelok, d tube freeze plugs, j tube plug, 1 tube plugs, 1 square tube plugs, 1 inch tube plugs, 1/2 square tube plugs, 2 square tube plugs, 4 square tube plugs, tube plus 8, plus one 8 tube, plus gros tube années 80 etc. stainless steel tapered tube plugs grades stainless steel heat exchanger tube plugs, stainless steel tapered tube plugs exporter & supplier, stainless steel plugs exporter & supplier, stainless steel tube plugs stockist and exporter. astm a182 astm a182 f304, f304l, 304h stainless steel tapered plugs manufacturer , astm a182 310, 310s, 316, 316l, 316h, 316ti stainless steel tapered plugs supplier & stockist, astm a182 321, 321h, 347, 347h, 904l stainless steel tapered plug exporter & supplier, duplex tapered plug, duplex 31803 & duplex 2205 tapered plugs exporter & supplier, super duplex 32750 & super duplex 32760 tapered plugs supplier & stockist, smo 254 tapered plugs exporter carbon steel tapered tube plugs, carbon steel tapered tube plugs, stainless steel tapered tube plugs, inconel tapered tube plugs, hastelloy tapered tube plugs, zirconium tapered tube plugs, copper nickel tapered tube plugs, copper & copper alloys tapered tube plugs, admiralty brass tapered tube plugs, bronze tapered tube plugs aluminium tapered tube plugs, alloy steel tapered tube plugs, titanium tapered tube plugs, monel tapered tube plugs,  tantalum tapered tube plugs, nickel & nickel alloys tapered tube plugs, copper nickel threaded tapered tube plugs, brass tapered tube plugs, aluminium brass tapered tube plugs, chrome tapered tube plugs moly tapered tube plugs manufacturers, suppliers and exporters in india. we exports to. saudi arabia, spain, colombia, iran, iraq, kazakhstan, thailand, dubai , oman, qatar, malaysia , singapore, uk, finland, australia, russia, usa, america, turkey, saudi arabia, egypt, sudan, afghanistan, new zealand , indonesia , turkmenistan, europe, japan, south korea, germany, italy, middle east, kuwait, algeria, nigeria, indonesia etc.   stainless steel tapered plugs for heat exchangers are used to seal the leaking tubes in heat exchangers, condensers, boilers, coolers.stainless steel tapered plugs for ss 304 tubes, ss 304l tubes , ss 304h tubes, ss 310 tubes, ss 310s tubes, ss 316 tubes, ss 316l tubes, ss 316h tubes, ss 316ti tubes, ss 321 tubes, ss 321h tubes, ss 347 tubes, ss 347h tubes, ss904l tubes, duplex tubes, super-duplex tubes, duplex 31803 tubes, duplex 2205 tubes, super duplex 32750 tubes, super duplex 32760 tubes, smo 254 tubes. etc. stainless steel tapered plugs offers low-cost maintenance and fastest method to seal the leaking tubes. the uniform taper and the smooth surface finish of stainless steel plugs assure positive sealing with minimum installation force.   dimensions/sizes for tapered tube plugs we offer tapered tube plugs of different sizes and materials for tubes having od of 1/4″ upto 4”. we can even offer customised sizes of ss tapered plugs as per client’s requirement

• From: GLASS HINGES & ADJ. BRAC
• Finish: S.S.
• Size:: 6 mm 8 mm

• Type: Gauge Saver
• Size: 1/4" - 1"
• Model: GS
• MOC: SS316
• Max Temp: 220°C
• Max Pressure: 1000 Bar

These are designed to protect pressure Instruments from over pressure exceeding The specified pressure range by sudden& Excessive pressure fluctuation from surge Or spike. This device blocks the higher Pressure exceeding the allowed value, until It comes back to normal, when system Pressure becomes normal.Hence this device Safeguards the pressure instrument, gauges, Switches or transmitters by blocking extra High pressure.

• Country of Origin: Made in India
• Material: Steel
• features: Robust, hermetically sealed case, External reset for reference temperature adjustment, Dished dial (anti-parallax) for ease of reading
• Pack Type: Box
• Available Range: 100 To 600 Deg C
• Temperature Range: 0- 800 C
• Stem Diameter: 8 mm

Coatmeter A)For Non-Magnetic Coatings On Magnetic Base : 1) Digital Meter For Coatings On MS2) Coatmeasure- M2s , Range: 2000 Microns 3) Coatmeasure - M6s, Range : 6MM 4)Coatmeasure - M12s , Range : 12MM Digital Coating Thickness Gauge –B) For Non-Conductive Coatings On Conductive Base Digital Meter For Anodising and Coatings On AI & Brass :1) Coatmeasure-C2s , Range : 2000 Microns, {0 To 20 (0.1) & 20 To 2,000 (1) Micron}2) Coatmeasure-C4s, Range : 4000 Microns C) For both Ferrous & Non-Ferrous bases : Coatmeasure - ( M & C )2s, Range : 0-2000 Microns   COATMETER : Dial Type Fixed Probe Gauge Spot Calibrationon nearest Testfoil for better accuracy Range : a) 100,200,300,600 Micron ( Any One ) b) 1, 3, 6, 0.5-9 MM ( Any One )   Coating Thickness Gauge - COATGAUGE : Pen Type Pull-Off Gauge, Also reads in Thou and on equally divided scale,0-600 Microns   Coatest AA Make Made In India Pull-Off Type (For Vertical Use Only) 0 To 250 Micron Or 50 To 800 Micron (Any) 1815 Picture code   Thickness Gauge (Throat Depth 40 mm) a) Dial Type Resolution : 0.01 - Range : 0-10 mm, Resolution : 0.01 - Range : 0-25 mm, Resolution : 0.001 - Range : 0-1 mmb) Digimatic (Digital Type) Acc : 0.01 - Range : 0-12 mm, Acc : 0.01 - Range : 0-25 mm, Acc : 0.001 - Range : 0-1 mm   Digital Coating Thickness Meter, Model : CM-8821 (Micro Computer Based)Range : 0 to 2,000um ( F Type= Non Magnetic Coatong on Magnetic Material )For Measuring The Thickness Of Any Non Magnetic Material (Paint Plastic Porcelain Enamel Copper Zinc Aluminium Chrome Etc) On Magnetic Bases (Iron Nickel Etc) Like Plating Layer Lacqure Layer Porcelain Enamel Layer Phosphide layer Copper Aluminium & Paper   Model CM - 8823,( NF Type = Non Magnetic Coating On Mon Magnetic Material ) Range: 0-1000 Microns/0-40mil   Model CM-8825 Fnf (Micro Computer Based) Ferrous & Non Ferrous Combined ( 2 in 1, F & NF type )Range : 0 To 200um/500um/1000um/2000um Data Output Rs-232 Interface   Model TM-8810 (Micro Computer Based)Range : 0 to 200um Thickness Meter, Microcomputer based, Ultrasonic,For Measuring The Thickness Of Steel Cast Iorn Aluminium Red Copper Brass Zinc Quartz Glass Polyethylene Pvc Gray Cast Iron   Model TM - 8811 , Same as above but with sound velocity 2000-8000 m/s Model : TM - 8812 (micro Computer Based) Range : 1.2 to 225 mm / 0.05 to 9 inch RS-232 Interface, with sound Velocity : 2000 - 8000 m/s   SHORE A HARDNESS TESTERa) Indian b) Japan   DIGITAL SHORE A HARDNESS TESTER, Model No.6510 A, 4 Digit-10mm LCD Display, ImportedRange : 10~90H, Resolution : 0.1, Test Specimen Min 6 mm Thick, Auto Off, Power Supply : 4 x 1.5V AA (UM-3) BatteryTo Measure the Hardness of : Rubber, Elastomers, Silicon Substances, Soft Plastic, Felt, Leather   DIGITAL SHORE D HARDNESS TESTER, Model No.6510 D, 4 Digit-10mm LCD Display, ImportedRange : 10~90H, Resolution : 0.1, Test Specimen Min 3 mm Thick, Auto Off, Power Supply : 4 x 1.5V AA (UM-3) BatteryTo Measure the Hardness of : Plastics, Formica, Plexiglass, etc   SHORE D HARDNESS TESTER INDIAN   Surface Roughness Tester, Model No.SRT-6210,. 4 Digit-10mm LCD Display, with blue / Black Light ImportedSensor : Inducutance Type, Radus of Probe Pin : 5, Material of Probe Pin : DiamondParameters : Ra, Rq, Rz, Rt. Measuring Range : Ra, Rq : 0.005 ~ 16.00um / 0.020 ~ 629.9uinch,Rz, Rt : 0.020 ~ 160.0um / 0.078 ~ 6299uinch   Digital VACCUM GAUGE, Range : 25-0 Microns Model TPI-605   Digital VACCUM GAUGE, Range : 25-0 Microns Model TPI-606   Digital Electronic Thickness Guage Mitu-Toyo Japan Model : 700-110sue Range : 0-12mm/0.01mm, 700-122sue Range : 0-25mm/0.01mm   Wet Film Thickness Gauge (upto 0.004") Circular Type   Dry Film Thickness Gauge (Dial Indicator Type)

We offer wide assortment of precision engineered plain ring gauges which are fabricated in both steel and tungsten carbide.

• Material: Stainless Steel
• Model Number: Series 155
• Usage/Application: Industrial
• Total Range: 8-150 mm
• Packaging Type: Box

• Crown Height: 0-25mm (0-1″)
• Fillet Weld Leg Height: 0-25 mm (0-1″)
• Misalignment (High-Low): 0-25 mm (0-1″)
• Undercut Depth: 0-2mm (0-1/8″)
• Fillet Weld Throat Size: 0-20 mm (0-3/4″)