Melt Flow Index Tester Dealers in Mumbai

• Features: Two-zone band heater, Touch-screen control, Quick die release, Moveable oven for easy clean, Cut the extrudate automatically at user preset intervals, Powerful data analysis and control software
• Temperature working range: 50oC to 450 oC
• Temperature rising time: <30min
• Temperature fluctuation: ± 0.5 oC
• Temperature display error: ≤± 0.2 oC
• Temperature recovery time: <4min
• Accuracy of timer: 0.01s
• Cut-off time interval: 1-36000s
• MVR measurement accuracy: ±0.03%F.S
• Piston displacement accuracy: 0.02 mm
• Piston displacement resolution: 0.005 mm
• On board multi-weight system including following weights: 0.325, 1.20,2.16, 3.80,5.00, 10.00, 21.60 kg
• Accuracy of weight: ± 0.5%
• Power supply: (220-15% ∼220+10%) VAC 50Hz 800W
• Dimension (L x W x H): (630 x 690 x 1500) mm
• Weight: About 180kg

• Certification: ISO 9001:2008 Certified
• Condition: New
• Frequency: Flow Reading
• Automatic Grade: Automatic
• Feature: Easy To Use
• Feature: Strong Construction, Minimal Maintenance, Optimum Functionality
• Use: Used for Evaluating the Flow Properties of Molten Plastics
• Quality: Optimum Quality

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube. A Bend Heater is affixed around outer circumference of the extruder tube and is used as an effective heating material. This heater is covered with a mineral wool insulation. The extruder tube is installed with a PID controller to indicate & control the temperature. Manufactured in accordance to the ASTM D 1238 & equivalent standards, this range of testers is available in various models with different parameters.Construction of the metal flow index tester: The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate The jet through which the extruder is pushed out is made from hardened and ground die steel The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, digital preset timer & other electronic components. Cleaning tools for tube cavity, jets, stoppers and cutters for the extrudate are also available with the equipment. The top of the piston carries a plate-form for keeping the load on.

• Country of Origin: India
• Type: Flow Tester
• Material: 50hz
• Certification: NABL CERTIFIED
• Color: Green, Kangaroo Green And White
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish
• Condition: New
• Frequency: 50 Hz
• Automatic Grade: Semi Automatic
• Power Source: Electric
• Operating Current: Single Phase
• Warrenty: 1year
• Temperature Capacity: High Temperature
• Brand Name: IDEAL LAB
• Power: 2-4 Hp
• Application: Polymer Testing
• Display Type: Digital
• Grade: Automatic
• Model: AUTO
• Size: Standard
• Resolution: 0.1 degree C
• Voltage: 220 V
• Phase: Phase

The melt flow tester, built according to International standards, is an instrument for measuring with great accuracy the "Melt Flow Rate" and useful for quality control test on flow ability, grading of thermoplastic material according to flow In general, useful for predicting adequacy of thermal stability case of processing and quality of molding  

• Feature: Easy calculation of angle of repose, Outflow Openings - 10 mm, 15 mm and 25 mm, Customized openings – 5 mm, 10 mm, 15 mm, Provides simple, repeatable flowability index of powders and granules

• Power: 230 Volts, 50 Hz, single phase.
• Timer: Digital presettable with a range up to 999 seconds and having buzzer output.
• Sample cutting: Manual.
• Weights: 2.16 kg & 5 kg.
• Accessories: Standard accessories*.
• Paint: Powder coated.

Computerized Melt flow index tester As per ASTM D 1238 & ISO 1133 – (Test Method A & B) to check the melt flow rate (MFR) & melt volume rate (MVR) of thermoplastics and compounds with automatic result.

RAW MATERIAL EVALUATION Model 6 Advanced Microprocessor controlled Melt Flow system with techni-Test software MODEL 6 MPCA   The 6MPCA is the most advanced model offered within the Ray-Ran Range of Melt Flow indexers. The operating procedure is very simple to undertake using its on board advanced microprocessor technology. the large liquid crystal display (LCD) provides simple on screen instructions reducing user error and the test parameters are easily entered via the alpha numeric membrane keypad. The apparatus can accurately determine results for MFR, MVR and Density at test temperature.   TECHNICAL SPECIFICATION ·         Microprocessor Temp Control ·         Dual Zone Heating ·         Temperature Accurate to +/- 0.1°C ·         Temperature Range 0 to 400°C ·         Temperature Resolution +/-0.01°C ·         Digital Encoder Accurate to +/- 0.02mm ·         Multi slicing feature for accurate flow curve analysis ·         Intuitive Menu Prompts ·         Test Die, Piston & 2.16kg Test Weight supplied as standard ·         Filling and cleaning tools included as standard ·         Conforms to ASTM D1238, ASTM D3364, ISO 1133, DIN 53735 and others ·         Electrical characteristics: 110v@60hz and 220v@50hz – fuse rating: 10amp ·         Techni -Test software included as standard

As per ASTM D 1238 & ISO 1133 – (Test Method A & B) to check the melt flow rate (MFR) & melt volume rate (MVR) of thermoplastics and compounds with automatic result. Specification: Microcontroller with alpha numeric key pad having built-in temperature controller with temperature range up to 400 degree centigrade, resolution of 0.1 degree Centigrade and accuracy of +/- 0.1 degree Centigrade similarly built-in timer with range 999.9 seconds. Piston Travel: Up to 25 mm & resolution of 0.02 mm. Specimen cutting: Motorized. Specimen Weighing: Automatic up to 60 gm and resolution of 1 mg. Weight: 0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg & 21.6 kg hard chrome plated weights. Digital Display: Individual MFI, MVR, Melt Density results & average results. PC output: Through serial port with Window 7 compatible software. Accessories: Standard accessories*. Paint: Powder Coated. Power Supply: 230 Volts, 50 Hz, Single Phase.  

• Material: MS
• Color: White
• Model Name/Number: MFI-2322
• Voltage: 220 V
• Type Of Testing Machines: MFI
• Temperature Range: 100 to 450degree
• Usage/Application: For Polymer Granules
• Packaging Type: Wooden Box
• Display Type: Digital
• Load Capacity: Motorized

Specification: Microcontroller with alpha numeric key pad having built-in temperature controller with temperature range up to 400 degree centigrade, resolution of 0.1 degree Centigrade and accuracy of +/- 0.1 degree Centigrade similarly built-in timer with range 999.9 seconds. Piston Travel: Up to 25 mm & resolution of 0.02 mm. Specimen cutting: Motorized. Specimen Weighing: Automatic up to 60 gm and resolution of 1 mg. Weight: 0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg & 21.6 kg hard chrome plated weights. Digital Display: Individual MFI, MVR, Melt Density results & average results. PC output: Through serial port with Window 7 compatible software. Accessories: Standard accessories*. Paint: Powder Coated. Power Supply: 230 Volts, 50 Hz, Single Phase.

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube.

Melt Flow Index Tester, Calibration, TEAR CUTTER, Izod Impact Tester

Dynisco Melt Flow Indexer, Digital Force Gauges