Melting Point Apparatus Dealers in Mumbai

• Weight: 40-50kg
• Driven Type: Electric
• Voltage: 230V
• Application: Industrial
• Automation: Automatic
• Durability: Long Life

Details : It is usable to estimate the Melting Points of chemicals, Pharmaceuticals, Food Etc. This is very useful to determine the melting point of any substance. Max Temp. upto 350 degree c. Consist with aluminium cylindrical block of heating. Radial holes admits a thermometer and glass capillary. Temp. controlled by energy regulator. Regulator fitted to the unit and with high, low heat switch.

We have specially designed this new type - of Precision Melting Point-cum-Boiling Point Apparatus which can be used for finding out the melting point & boiling point of the substances with high degree of accuracy ambient to 320°C.     The characteristic feature of the instrument is a small U-shaped glass container made from corning glass, its two tubes which are open at top have a lateral connection.   The 'Teflon' plug also carries the electric heating coil.The U-Tube is filled with inner liquid (Silicon Oil) so that good circulation is ensured and that both the capillaries and thermometer are well immersed.     An electrically driven stirrer dips into the rear portion of the U-shaped tube. The front tube is fitted with a 'Teflon' plug which serves as :   Entry for a thermometer Entry for three melting point capillary tubes of 1 mm dia. Entry for Boiling Point Capillary. Entry for a base plate on which rests the thermometer and the 3 capillary tubes, which ensures that the test material is on the same level as the bulb of the thermometer.   The U-Tube and motor are clamped to a support rod. The based on the apparatus is made from steel and incorporates the following parts :   A variable transformer 0 to 260 volts to the mains supply which allows stepless regulation of heating current. On the left of Rotary knob is main 'ON' and 'OFF' switch and a pilot lamp and on the right are two switches one for heating coil with illumination and the other for stirrer. The base also supports an adjustable magnifying glass which permits excellent observation of the test material in the capillary tubes, which in turn, are illuminated by two-6 volt lamps. The magnifier is easily adjustable for the most favourable observation and the two light bulbs are screened to prevent glare Below the U-Tube there are holes on a tube which can be connected to a compressor, in order to allow rapid cooling of the heating medium, readiness for the next test   The rate of temperature rise can be exactly adjusted within wide limits. The heat transfer to heater material and to the thermometer is intense and constant. The test sample and the thermometer are kept exactly at the same temperature. The instrument is very useful for determination of the so called 'Momentaneous' melting point, because the temperature can be maintained constant at any level. The Precision Melting Point Apparatus can also be used as a Boiling Point Apparatus for determination of boiling point of liquids by using Boiling Point capillary supplied with equipment. The equipment is suitable for 230 Volts single phase. 50 c/s Hz only.  

• FEATURES: Magnifying lens for capillaries, Heats up to 300°C in 9 minutes, Specially designed heater for uniform heating, Provision for 3 meeting point tubes, Shadow less illumination.
• Maximum temperature: 350°C.

• Weight: 0-10kg
• Voltage: 110V
• Power: 100W
• Driven Type: Battery, Electric
• Warranty: 1yrs
• Application: Household, Industrial, Laboratory
• Automation: Automatic

Description : AMP 2A/2 melting point apparatus is an automatic, uncomplicated, and accurate process for determining a sample’s melting point. The starting temperature and heating rate are selected with a touch of the function keys . Simplyplace1 - 3 mgin to disposable sample tube and insert into instrument; the rest is automatic. When the melting point is achieved, a visual and audible signal is given and the temperature is displayed. The AMP 2A/2 makes use of the optical behavior of substances to detect their melting point, i.e., it measures the reflection of incident light in the crystalline state and the increase in light transmittance while heating. RS-232C interface capability allows connection to the CPR02 printer for GLP applications.   Features : Photo Electric Detection. Large Backlite LCD display. RS-232 Interface. Measurement of 3 samples simultaneously (Optional). Display of initial and final melting points. Calculation of average value of initial and final melting points. Platinum resistor for the precise temperature measurement. Capillary sample tube as stipulated by pharmacopoeia. Software for computer interface.   Application : Melting Point Apparatus measures the melting point of a substance i.e. the temperature at which the state of the substance changes from solid to liquid. The actual melting point is an indication of the purity of a substance and hence an ideal tool for the quality control of medicines, perfumes, dyestuff and other organic crystalline substances.

Salient Features : User friendly key board                                         On line / Off line Printing facility Over 160 Test records can be stored            Validation facility Facility to test unknown sample.            For more clarity, stirrer speed adjustment on key board. Facility to store 10 Product names with their expected Melting Point.                 Model: VMP – PM : The instrument is designed to determine Melting Point of solids or Boiling Points of liquids, with high accuracy. The apparatus incorporates the latest type of MICROPROCESSOR BASED circuitry and is very simple to operate. The apparatus consists of a cylindrical Silicon Oil bath with heater. The sample is filled in a capillary and suspended through Teflon cover of the Silicon Oil bath. Similarly a Boiling Point tube with sample liquid can also be suspended through Teflon cover to determine Boiling Point of a liquid sample. The temperature of bath is maintained uniform with built-in magnetic stirrer. Tips of the sample filled capillary can be observed through magnifying lens on illuminated background of silicon oil bath. The Apparatus equipped with four lines alphanumeric informative LCD screen, which indicates PRODUCT NAME, BATCH NO. and SETTEMP.ACTUAL TEMP. Etc... The self-explanatory feather touch keyboard enables to set the desired program for heating Silicon Oil bath. Expected MELTING POINT of the sample is entered as Set Point. On pressing the ‘START’ key, the instrument automatically executes the program with ideal heating rates. The temperature of both starts rising fast in the beginning and automatically adjusts the rate of heating in suitable steps and 1I0;C/ min. towards the end of program. The unit is provided with Printer socket. Any 80 column dot matrix printer can be connected, it will print the header, product name, batch no. date and time of the test and rise in temp./min towards last 10I0;C. It also prints START OF MELTING POINT and END OF MELTING POINT. OVER 160 Test Records can be stored in the memory. ON line  or OFF line printing is possible. Date-wise selection for printing is possible. An audio signal draws attention of operator for close observation of Melting Point towards the final reading. Melting Point can be clearly observed through Magnifying Lens and after reaching the actual Melting Point, the STOP key is to be pressed. At this stage Temperature will stop rising and displayed Temperature indicates completion of Melting Pont. If through oversight one fails to press ‘STOP’ key, the heating will stop automatically, after the Temperature reaches above set Temperature with TEST OVER message. The range of the Melting Point can also be determined by pressing RECORD TEMP. When RECORD TEMP, key is pressed start of Melting Range is indicated on the screen. Four such temperature values can be stored in the memory. On pressing the STOP key after complete melting of the sample , the heating is stopped. Start and end temperature of the Melting Range is then displayed. The instrument is also having facility for testing unknown sample. When UNKNOWN SAAMPLE option is selected the temperature will start rising at nominal rate so that is easy to observe the temperature at which the sample melts. Validation Program for the Standard Samples like Vanillin, Benzoic Acid and Caffeine is incorporated. Specification:  Temperature range of the instrument is about 2º C above room temperature up-to 300ºC, readability + 0.1ºC, with accuracy + 0.1%. The unit works on 230 volts / 50 Hz, (0.750 KW Max.) A.C. mains supply. The Instrument is supplied with 200 ml of Silicon Oil and a box of capillaries.

A melting point apparatus is a scientific instrument used to determine the melting point of a substance. We supply high-performance Melting Point Apparatus that provides safe and accurate measurements. The Melting Point Apparatus we offer are sourced from trusted manufacturers in the market.

Melting Point Apparatus measures the melting point of a substance i.e. the temperature at which the state of the substance changes from solid to liquid. The actual melting point is an indication of the purity of a substance and hence an ideal tool for the quality control of medicines, perfumes, dyestuff and other organic crystalline substances. Photo Electric detection. Large Backlite LCD display. RS-232 Interface. Measurement of 3 samples simultaneously. Display of initial and final melting points. Calculation of average value of initial and final melting points. Platinum resistor sensor for the precise temperature measurement. Capillary sample tube as stipulated by pharmacopoeia 

VinSyst Melting Point Apparatus VMP Series measures the Melting Point of a substance i.e. the Temperature at which the state of the substance changes from Solid to Liquid. The actual Melting Point is an indication of the purity of a substance and hence an ideal tool for the Quality Control of Medicines, Perfumes, Dyest 1. Testing the Temperature with High-Precision Sensor and   amends Nonlinear Error Automatically. 2. Uses AFCC Technology for High Accuracy in controlling   temperature and Negligible Linear error in Heating Speed. 3. Memory to store Present Data and Melting Point Data. 4. Auto Magnetism Stirrer, with the Bath Oil even in Temperature. 5. Auto-Present Temperature, Auto-Heat, Displays Preset and   Real-Time Data Alternately. 6. Inbuilt Auto-Test, Auto-Diagnose,Aauto-Alarm. 7. Measurement of 2 samples Simultaneously. 8. Automatic Alarm when Temperature raises beyond 270ºC. 9. Digital Display of Initial and Final Melting Points. uff and other Organic Crystalline Substances.   1. Test Temperature with Standard Mercury Thermometer. 2. Adjust Heating Voltage by a Key Stroke / Knob. (VMP-D / VMP-A) 3. Display Voltage with Digital/Analog Voltmeter. 4. Observe Melting Sample by magnifier. 5. Measurement of 3 Samples Simultaneously.

• Features: Safe, simple to use, and accurate.
• Max Temperature (° F): 482
• Heat-Up Time: 50 to 350⁰C in 15 minutes
• Height (in): 4
• Depth (in): 5 1/2
• Width (in): 14 1/2
• Power (VAC): 120
• Power (Hz): 60
• Description: Analog Melting Point Apparatus, 120 V

Digital Melting Point Apparatus is a compact instrument designed for accurate determinations of melting points of solid samples.

Programmable instrument designed to maintain 1°C per minute heating rate at athe time of melting point for the highest accuracy. Heating rate is precisely controlled by microprocessor circuit and is equipped with silicon Oil Bath. Suitable for determination of melting point , Melting range, Boiling points. Printer interface is provided for the printer.  

• Weight: 5 kg. approx.
• Display: Digital 12 mm Red LED
• Bath: 100 ml oil bath with level marking
• Resolution: 1 degree C
• Brand Name: Labline
• Dimension: 300 W x 220 D x 260 mm H
• Sensor: RTD (PT-100) Temp. Sensor
• Hold: Facility to hold temp.
• Stirrer: Magnetic with teflon coated bit
• Viewing: Through magnifying glass,background illuminated

Melting Point Apparatus measures the melting point of a substance i.e. the temperature at which the state of the substance changes from solid to liquid. The actual melting point is an indication of the purity of a substance and hence an ideal tool for the quality control of medicines, perfumes, dyestuff and other organic crystalline substances. Photo Electric detection. Large Backlite LCD display. RS-232 Interface. Measurement of 3 samples simultaneously. Display of initial and final melting points. Calculation of average value of initial and final melting points. Platinum resistor sensor for the precise temperature measurement. Capillary sample tube as stipulated by pharmacopoeia 

• Temperature Range: Room temp to 300 °C
• Readability: 1.0 °C
• Accuracy: ± 0.5 %

This apparatus is used for the determination of single or mixed melting points of most organic substances in powder form. These substances , which are opaque at ambient temperature become transparent on melting. The melting point is noted on a mercury-in glass thermometer just when the substance under test starts melting.The apparatus consists of an aluminum block in which three small holes for inserting thin glass capillaries , and one larger hole to accommodate a mercury in- glass thermometer are provided. The aluminum block is heated from two sides by clamped-on nichrome wire strip heaters which are electrically insulated. The block assembly is housed in an aluminum casting housing which is finished in elegant paint.  The thin glass capillaries which are inserted into the three holes in the aluminum block are illuminated by an incandescent lamp and are seen magnified by the use of a built-in double convex lens. This eliminates the strain of viewing the thin glass capillaries in which the powders under test is / are placed.The rate of rise of temperature of the aluminum block is controlled by a rotary rheostat built into the apparatus. The glass capillaries are in thermal contact with the aluminum block and therefore heat transfer is efficient. When the substance starts melting, the temperature as indicated by the inserted thermometer is noted , which is the melting point temperature of the particular substance.  A boost heater to heat the block rapidly is also provided. Put of booster heater when temperature will reach 25ºc to 30ºc below the required temperature (i.e. Rough melting point of the substance) . Slow heating will help to give accurate melting point. As an optional accessory , a cooling plug to bring down the temperature can be supplied, which is to be inserted in the hole where thermometer bulb was kept . Cooling takes place by circulation of water in the cooling plug which has an inlet outlet.

The Melting Point M-560 is designed for manual determination of melting and boiling points. The easy observation of the phase transition through a magnifying lens together with the intuitive calibration and verification procedures ensure highly accurate measurements.