Membrane Bio Reactors Dealers in Mumbai

• Automatic Grade: Automatic
• Power: 0-25 KW, 100-200 KW
• Driven Type: Electric
• Installation Type: Complete Civil Work With Installation
• Plant Type: Sewage Treatment Plant
• Treatment Capacity: 10-300 M3/d
• Water Source: Borewell Water, Industrial Wastewater
• Treatment Type: Sewage Treatment
• Bioreactor Type: Membrane

Advantages : Reduced footprint, by eliminating secondary clarifiers and media tertiary filtration.  The process produces exceptional effluent quality, capable of meeting the most stringent water quality requirements. Modular schematic that allows for ease of expansion and configuration flexibility. Robust and reliable operation and reduced downstream disinfection requirements.

A membrane bioreactor is an activated sludge process where the clarifiers are replaced with membranes for solid separation. A membrane bioreactor is a technology integrating membrane separation and biological process.Biological waste water treatment with submerged membrane modules in the form of membrane bioreactors (MBR) is the process of the future.This advanced membrane technology offers operational safety, high efficiency and cost effectiveness.Types of membrane Hollow Fiber MBR Plate and Frame MBR BIOCEL ® MBR’s produce a high effluent quality which can not be achieved with typical conventional systems. For the first time the new BIO-CEL ® - module combines the advantages of submerged hollow fiber and flat modules.This application of self-supporting membrane sheets allows the construction of modules with high packing density. Advantages of the new BIO-CEL ® - Module: Absolute separation of bacteria and suspended solids Separation of adsorbed viruses Resistant to clogging e.g. with hairs and fibers or sludge High packing density due to self-supporting membrane sheets Efficient use of surface area by a hydro - dynamically optimized design Effective membrane cleaning with permeate

Membrane Bioreactor (MBR) Units Required: Raw sewage collection sump Equalization tank Aeration tank Membrane bioreactor MBR (Membrane bioreactor):  Results in high efficiency in removal of bod, cod, suspended and dissolved solids. Meets all effluent standards. Tertiary treatment doesn’t required as membrane system is used. Membrane filtration process produces an effluent which have low suspended solids concentration and turbidity units. Specifications:  Treatment capacity (m³/d): 10 to 300 Size (m): 1.8x1.5x1.8 to 8.5x3x3

It is proposed to use Membrane Bio-Reactor (MBR) system working on the principle of filtration of activated sludge through the concept of using flat sheet type or hollow fibre type submerged membrane modules in bioreactors. The membranes in a MBR system are made from polymeric organics (PVDF, PE or PES) and assembled into units (modules, cassettes, stacks) with high packing density. Raw wastewater pre-treatment is important to sustain stable MBR performance and fine screening is essential operation. Advantages MBR is capable of meeting the most stringent effluent water quality standards. Membrane modules are back-flushable Yield 60-80% less sludge than conventional system Requires cleaning only once in 3 to 6 months. Maintain high MLSS No secondary clarifier, virtually no effluent suspended solids, no RAS recycling. It allows systems to be remotely operated and monitored, thus significantly reducing operator attendance. Sludge can be wasted directly from aeration tank

Membrane Bio Reactors, Water treatment systems, Waste Water Treatment System

Membrane Bio Reactors

Membrane Bioreactor, Organic Solid Waste Odour Control Misting System

Membrane Bio Reactor, drinking water filters, Demineralizers