Membrane Switches Dealers in Mumbai

Manufacturing facility was set up in Mankoli, Thane on the outskirts of Mumbai. This is a state-of-the-art, climatically controlled factory with 20000 Sq.ft area, currently operational in 10000 Sq. ft, the remaining area earmarked for future expansion. The company is lead by dynamic Managing Director Paul Malpan. After completing his Engineering degree, Paul Malpan spent 8 fruitful years in research and development in a leading electronic enterprise.

• 40-45gm: Neoprene / Silicon
• -20 deg C to +80 deg C: 15A, 250v, cos=1
• 2.5mm2: PG 11/PG 7 (standard)
• LM6-CAST ALUMINIUM: IP53

FEATURES : The instrument consists of a microswitch inside a cast aluminium box, covered by a flexible membrane of neoprene or silicon rubber. OPERATION : The device must be mounted so that the flexible membrane is exposed to the product whose level should be controlled in such a way that the product, if present, can press the membrane. When this membrane becomes covered up by the product, it moves under the product pressure, thereby working the microswitch. The device must be connected to control signal or to mechanisms driving the product transportation systems, like feeding, unloading ,etc. APPLICATION : Switch has a buoyancy which guarantees smooth, trouble-free operation under all conditions. The switch has double chamber and a final remoulding finish to make it absolutely hermetic. INSTALLATION : MODEL DLS-AL-ND (with neoprene diaphragm) or DLS-AL-SD (with silicon rubber diaphragm) level switch is used for indicating, controlling, and regulating the level of granulated or powdered dry materials with a grain diameter up to 30mm and a density of 0.3 to 2.5 g/cm3, flowing through a silo, hopper or conduit. INSTRUCTIONS AND MOUNTING : The device can be installed outside the container by making a hole on the wall, so that the membrane remains exposed to the product inside. Suspended by means of a tube, it can be also installed inside the container. Using adaptors, it can be installed in pipes and conduits. Wherever possible level switch should be mounted on vertical surfaces. By this means ,the product can flow freely downwards, and wrong indications are avoided. It can be mounted on surfaces with a slope of not more than 30degrees from vertical, provided that the product leaves the membrane thoroughly free when flowing along. If maximum levels are to be controlled, the devices must be mounted at such a height that the product overflowing the membrane can exert pressure on this membrane, working the microswitch.

A membrane Keyboard has two screen printed polyester films with conductive ink to form the circuit layer of the Keyboard. Between the two circuits, a die-cut spacer at contact points is placed. To complete the circuit a touch of finger on the die-cut holes allows to close the contact. Upon release, the circuit is broken. User can specify the specific key contacts through a Graphic overlay. For interfacing with the customer’s electronics, the panel back is laminated with an adhesive for mounting on a backer or enclosure which can be terminated to a malefemale clincher connector.

• Type: Matrix Membrane Switch
• Thikness: 1-2 mm
• Size: 4 x 4 mm
• Dishplay Type: Touch

• Normal sensitivity: 40-45gm
• Membrane material: Neoprene / Silicon
• Max.Working Temperature: -20 deg C to +80 deg C
• Microswitch contacts: 15A, 250v, cos=1
• Max.cable size to be  connected: 2.5mm2
• Cable gland: PG 11/PG 7 (standard)
• Housing: LM6-CAST ALUMINIUM
• Weather protection: IP53
• Weight: 1.2kg (Approx