Metal Gaskets Dealers in Andheri East, Mumbai

• Material: Metal
• Shape: Customised
• Color: Metalic
• Pattern: Plain
• Packaging Type: Cardboard Box
• Appearance: Antique
• Feature: Attractive Look, Fine Finished

Metal Jacketed Gaskets find their application in  HIGH PRESSURE and HIGH TEMPERATURE conditions. Its structure is easily compressible with tightening loads lower than those required for solid metallic gaskets.Applications : Sealing of heat exchangers Valve cover Autoclaves manhole Availability : Single Jacketed Double Jacketed Corrugated Jacketed Sheet Metal Options : SoftIron AISI 304/316/321 Copper Brass FILLER Available In : Asbestos / Non Asbestos CAF PTFE FLEXIBLE GRAPHITE CERAMIC

We have come up with Metallic Gaskets in different designs based on industrial usage, budget, chemical contact and physical parameters. Our company is a renowned Supplier and Exporter of Metallic Gaskets from India. These Metallic Gaskets act like a mechanical seal that fills the space between two mating surfaces. A few Gaskets require an application of sealant directly to the gasket surface to function properly.

A Metal Reinforced Gasket is a rigid laminated gasket consisting of soft layers bonded to each face of a solid metal core by a high temperature/chemical resistant synthetic bonding agent. While the solid metal core prevents gasket blowout, it provides high strength and rigidity: and the soft facings provide an exceptional seal. The soft facing material flows easily into the flange faces allowing a high integrity seal, even under low applied seating stresses. The metal core material is selected to suit the application design conditions and the media to be sealed. A wide range of core materials are available, from the relatively low cost carbon steels, through the range of stainless steels up to the "exotic" alloys. For chemical resistance and temperature stability purposes, the correct core material must always be selected. Standard core material is 316 stainless steel, and standard core thickness is 1/8". The soft gasket facings can be Flexible Graphite, PTFE, Compressed fiber gasket material. However, Flexible Graphite is the standard and most widely used facing material supplied with the MRG gasket. Suitable up to pressure Class 300, the Metal Reinforced Gaskets is widely used in the chemical and petrochemical industries, where a high temperature/corrosion resistant, high integrity joint is required.

The Superior Quality Spiral Wound Metallic Gaskets Manufactured By Us is Highly Demanded By the Clients Owing to Its Excellent Ability to Recover Under Variable Loads. Our Spiral Wound Metallic Gaskets are Skillfully Manufactured By Spirally Winding a Preformed Metal Strip and Filler On the Outer Periphery of Metal Winding Mandrels. Its Winding Mandrel Outside Diameter Forms the Inner Diameter of the Gasket and the Laminations are Continually Wound Until the Required Outer Diameter is Attained. We Offer These Spiral Wound Metallic Gaskets in Customized Thickness and Sizes as per the Client’s Requirements.

• Thickness: 3.2 mm
• Temperature: 6500C

Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal.

Ladder type is particulars suitable for use on Boiler flanges where the runigs of the type can be located over the strides or bolts, suitable for tapes 3000C / 12500C per stream to stream / Cold / Hot / acids, alkalis, oil, chemicals, solutions low thermal insulations size: any width X thickness. Qty. No. flexible sleeves of pipes of / Asbestos / Ceramic / Fibre Glass / Teflon / Carbon Graphite / Rubberised Wire Wooven reined forced IN/TC/23 webbing tape.Asbestos free ceramic tape Width X thickness X long in mtrs. No G / 81C / DGS 2864 IN / TC /23/0414(E29) / 924-554 & 924-5543.

aluminium gasket, Eyelets, pharma foils, lamp caps, ftl caps, Tagger Foil

Steel Lined Gaskets APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & Construction Equipment

Spur Corporation has been supplying Jacketed gaskets to top corporations all over the country.Jacketed gaskets combine the superior temperature resistance of a metal jacket with the sealing performance of a filler material. The filler material is fully enclosed by a two-piece metal jacket, which covers both inside and outside diameters of the jacket and the contact surfaces on both sides. Such gaskets are designed for high temperatures such as Fahrenheit, that is encountered in heat exchangers,boilers and similar type of applications.Heat Exchanger gaskets are more compressible than sole-metal corrugated types and offer better compensation for flange irregularities when high pressures are to be seale.We have adequate capacity to produce any shape and size with many compartmental ribs made out of different materials.They can be used for heat transfer equipment, condensers ,coolers,joints etc. We fabricate jacketed gaskets from any metal in any thickness customised to the requirement to provide compressive strength and blow out resistance, depending on the application’s corrosive conditions. For excellent compressibility and resilience, our filler materials for jacketed gaskets include flexible graphite ,non-asbestos, ceramic, PTFE and corrugated metal. Jacketed Metal are available in following varieties : SINGLE JACKETED GASKET: This type of gasket is widely used in engineering applications and air tool applications where space is limited, relatively low compressive forces are available for seating the gasket and gasket seating surfaces are narrow.The majority of applications for single-jacketed gaskets are normally 1/4" or less in radial width. DOUBLE JACKETED GASKETS: The application of the Double-jacketed gaskets lies in heat exchanger applications and are the most commonly used style of gaskets. Any material that is commercially available in 26-gauge sheet, and where the service is not critical, this type of gasket are available. Another application of the same lies in standard flanges. SINGLE - JACKETED OVERLAP: Where maximum flange width is approximately 1/4", single-jacketed overlap construction gasket is used. This finds application when the flange width makes it impractical to use a double-jacketed gasket and total enclosure of the soft filler material is required. DOUBLE JACKETED, CORRUGATED GASKET: The double-jacketed corrugated gasket is an improvement on a plain jacketed gasket in the sense that it will provide an additional labyrinth seal in the corrugations on the gasket. A double-jacketed corrugated gasket still relies on the primary seal on the inner lap. It also provides the advantage of reducing the contact area of the gasket, enhancing its compressive characteristics. ONE PIECE, TWO PIECE, THREE PIECE ONE SIDE OPEN, French type gasket: French type gaskets finds application in a one-piece jacketed construction for narrow radial widths not exceeding 1/4" and in two- and three-piece constructions for wider applications. The most commony used French type gaskets are fabricated using copper sheath. When the application requires the outer edge of the gasket to be exposed to fluid pressure,this type of gasket can also be used with the jacket on the external edge of the gasket.

We offer Spiral Wound Metallic Gaskets. Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

aluminium gaskets, PP Caps, Aluminium Seals, Packaging Materials

metal jacketed gasket, industrial gasket, Silicone Gasket, industrial gasket

aluminum gasket, aluminum fin, F.T.L Caps & Lamp Caps, aluminum vial seals

Metal Gasket, Ring Gasket

We are an eminent and leading trader of Metal Inserted Gaskets

Metallic Gaskets, industrial spiral gaskets, industrial gasket