Metal Seals Dealers in Goregaon West, Mumbai

This Seal is specially designed for high Temp - Application and Provided with Drive lugs which Drives the Seal faces Positively to Protect bellows from Tortional & Tresses. Also used for high viscocity applications. High temperature Metal Bellows is used for high temperature application such as refinery, Petrochemical Industries. Due to its narrow seals cross section design, can replace most type of seal used in ANSI pumps. Secondary seals are made up of Grafoil which can withstand high temp upto 425 deg C. it is resistant to abrasive particles in pumpage and not Shafts/Sleeves fretting. The edge welded bellow are produced by sta mping out a male and a female diaphragm and welding them edge to edge. These diaphragms typically have several ripples running from ID to OD. These seals can be provided as Cartridge seals in single and double design. Metal Bellows cartridge seals are ready to install Mechanical Cartridge Seals. All parts of mechanical seals from a compact unit together with the shaft sleeve, cashing parts, connection flange & torque transmission elements. Cartridge seals benefits is to reduce down time periods and enables mechanical seals to be installed in hand to hand access place. We have different models.

• Temperature: -40°C to +260°C
• Pressure: up to 20 bar g
• Speed: 20s m/s

Metal bellow seal, Features: Single seal Balanced Independent of direction of rotation Welded Metal Bellows Provides superior performance in the most difficult process services. Allows for ease of seal installation Angle of bellows section is titled at the inner diameter weld to relieve stress concentration and provide longer seal life.

Metal bellow seal, High temperature Metal Bellows is used for high temperature application such as refinery, Petrochemical Industries. Due to its narrow seals cross section design, can replace most type of seal used in ANSI pumps. Secondary seals are made up of Grafoil which can withstand high temp upto 425 deg C. it is resistant to abrasive particles in pumpage and not ShaftsSleeves fretting. The edge welded bellow are produced by sta mping out a male and a female diaphragm and welding them edge to edge. These diaphragms typically have several ripples running from ID to OD.

• OPERATING LIMITS:: Shaft Diameter 'd'
• 15mm to 100mm: Pressure 'p'
• Upto 10 bar: Temperature 't'
• -50 to +150 ºC(max): Shaft speed 'n'

Metal bellow mechanical seals are inherently balanced and are independent of direction of rotation. The unique feature of this type of seal is that, there is no dynamic 'O' rings and therefore it will never hang up or damage the shaft and sleeve, it also has an ability to handle corrosive as well as abrasive & viscous media. These seals have self-cleaning & non-clogging construction. With selection of special bellow material it can be used in highly corrosive media.Generally used for handling highly corrosive chemicals, high Temperature applications, petroleum refinery etc.

Designed to handle abrasive particles up to 30% by weight. Specially designed Back plate of pump and Impeller in this particular seal type ZR32D which gives better seal life and performance. Hydraulically balanced faces for excellent seal reliability. Specially coated spring is located outside the process. Flushing helps to lubricate the seal faces from atmospheric side of mechanical seal. Features Slurry seal. Double seal for Non metallic pump. Standardized modular design. Inside Mounted. Materials Seal Ring Faces : SiC and Carbon Seat Faces :SiC and Ceramic Elastomer : Viton, TTV, FEP and FFKM MOC : SS 316, PVDF – CHANGE OF MOC ON REQUEST Operating Capabilities Shaft Dia. :20mm to 80mm Pressure : Full Vacuum to 8 bar Temperature : up to 180°C Speed: 3000 r.p.m. Applications Specially developed for steel plants on CRM (Cold Rolling Mill) in acid circulation pumps for PP, PVDF & PFA Lining Pump. What is Slurry Seal ? Slurry Seal For Non-Metallic Pump Seal Type ZR32/D IMS have been carefully designed and manufactured with great precision and care. Please Visit us to see our full range of Slurry Seal For Non-Metallic Pump Seal Type ZR32/D IMS to meet all your requirements. We are the manufacturer of Slurry Seal For Non-Metallic Pump Seal Type ZR32/D IMS in Mumbai INDIA.

• Shaft Diameter: 18...100mm
• Pressure: 20 bar (max)
• Temperature: -20...4000C
• Velocity: 20m/sec

Type VMB - 50G seals specially designed for high temperature application and suitable for high start-up toque since the bellows unit is independent of torque transmission. Grafoil is used as a secondary member having excellent temperature range upto 4000C. Shrunk fit seal face design minimize face distortion restricting leakage and wear rate to very low level under a wide range of condition.         Seal Characteristics   Single Seal Balanced Metal Bellows Independent of directions of rotation     Application   High temperature applications Petrochemicals Refineries

• Shaft Diameter: 18...100mm
• Pressure: 20 bar (max)
• Temperature: -20...220OC
• Seal Faces: Carbon, SiC, Tung. Carbide
• Velocity: 20 m/sec
• Metal Parts: SS316, Carpenter 42, Hastelloy-C, Alloy 20
• O-rings: Elastomers, PTFE

Series AES-010 seals are widely used in refining, petrochemicals and chemical industries. Static o-ring is used as a secondary member. The absence of dynamic o-ring prevents possibility of seal hang-up. Centroid loaded face design increases seal life by avoiding seal face distortion caused due to thermal expansion and also ensures optimum face flatness over a wide operating condition. As a standard, AM350 bellow cores are used. For chemical compatibility Alloy C-276 or Alloy 718 bellow cores can be used.     SEAL CHARACTERISTICS • Single Seal• Balanced• Metal Bellows• Independent on direction of rotation     APPLICATIONS • General Chemicals• Petrochemicals• Refineries

• Shaft Diameter: 5/8" to 6.0"
• Pressure: 35 bar
• Temperature: -70oC to + 450oC

Metal Bellow Seal (LIE/710) : Metal bellow seals are for high temperature moderate pressure applications pumps. Like chemical, petrochemical, thermic fluid, boilers and refinery process unit, this seals are independence of direction of rotation and suitable for process services requiring corrosion resistance. This bellow seal is designed of Diaphragms type at the edges to form a bellow unit. There is no need of a springs, secondary seal and it provides flexibility to the seal face. This seal is available in two types of elastomer rubber o ring & grafoil to be use in extreme temperature conditions. It is mostly recommended for high temperature liquids , thermic fluid , boilers Refinery , petrochemical ,chemical etc Material Of Construction Sealing faces : Carbon, Silicon Carbide, Tungsten Carbide Welded bellow : AM 350 Elastomer : Viton, Aflas, Grafoil, Karlez , GFT Hardware : AlSI 316, Carpenter 42  

• Size: 1- 5 inches
• Color: Black
• Material: Rubber
• Usage: Sealing Industry
• Shape: Round
• Country of Origin: Made in India
• Speed: up to 25 m/s
• Pressure: up to 15 Bars
• Temperature: -50 to 350°C
• Shaft Dia: 19 to 100mm
• Secondary Seals: Viton/PTFE/GFT
• Seal Face: Carbon/TC Vs Sic./TC
• Metal Components: SS-316

Ptfe Spring Energized Seal

metal bonded seals, back up ring, Four Lobed Rings

metal below seal, Carbon Ring, compressor seal, Cartridge Seals

We are offering best Metal Bellow Seals

Metal Bellow Seal, Cartridge Seal, Mechanical Shaft Seal & Spare