Metal Sheets Dealers in Amar Mahal Junction, Mumbai

• Thickness: 1 - 12 mm
• Shape: Rectangular
• Material: Titanium
• Brand Name: Technolloy Inc
• Technique: Cold Rolled
• Material Grade: GR-2, GR-5
• Width Range: 300 - 3000 mm

• Thickness: 0.8MM TO 2.5MM
• Brand Name: ESSAR/JINDAL /IMPORTED
• Length: AS PER REQUIRE

Cold rolling occurs with the metal below its recrystallization temperature (usually at room temperature), which increases the strength via strain hardening up to 20%. It also improves the surface finish and holds tighter tolerances. Commonly cold-rolled products include sheets, strips, bars, and rods; these products are usually smaller than the same products that are hot rolled. Because of the smaller size of the workpieces and their greater strength, as compared to hot rolled stock, four-high or cluster mills are used.[2] Cold rolling cannot reduce the thickness of a workpiece as much as hot rolling in a single pass.

• Material: Decorative Laminates & HIPS
• Thickness: 1 mm-5 mm
• Shape: Rectangular
• Finish: Glossy
• Size In Sq Ft: 8x4 & 8x3 Ft

We cater to various industries with our qualitative Sheets , Plates & Coils that are in huge demand in the market. We are well reckoned as one of the dominant Steel Sheets & Plates Exporters and Suppliers based in India. To match the various needs of the clients, our Sheets & Plates are available in various metals, sizes and grades. Utilization of finest quality raw materials in Carbon Steel Sheets & Plates assures high durability as well as strength. Easy to install, our Sheets & Plates provide long lasting trouble free performance without any maintenance. » Stainless Steel : ASTM A 240, SA 240, AISI » Type : 304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 317, 317L, 321, 321H » Carbon Steel : ASTM A 515, A 516 Grade: 60, 70 B 2062 » Alloy Steel : ASTM A 387, Class: III, Grade: 11, 22, 5, 9, 12, 1 » Nickel Alloys : B162, B127, B463, B576, B168, B443 » Copper Alloys : Aluminium, Copper, Brass & Gunmetal

In the Hot Rolled and Cold Rolled Strips segment, we represent S.p.A. Metallurgica Luigi Pessina Acciai of Italy, who have a wealth of experience gathered in the last 65 years. They supply the following Steel in both Hot Rolled and Cold Rolled conditions. The grades they can supply have been mentioned below.

• Material: Mild Carbon Steel
• Thickness: 2.8mm TO 10mm
• Length: Can be cut to sheets according to requirement
• Width: 1250mm TO 1500mm
• Max. Weight: 25MT per Coils

Chequered sheet is a significant form of steel that is used as a raw material for various small to large scale industries. This form of plates is wear resistant and offers certified hardness. Chequered sheets cater to various wear resistant applications. At Padham Steel, both hot dip galvanized and self-colour black-condition-finish chequered sheets are available. We also offer diverse thickness and sizes as per the customer's requirements. Usually, chequered plate flooring is suggested as road in industries to reduce the chances of skidding. Padham Steel ensures the products are obtained from authentic manufacturers of the industry to ensure reliability and durability. We guarantee highest quality and meet all the requirements of renowned certification. Padham Steel is one of the premier names in the industry that offers a qualitative range of Chequered Steel Coils/Sheets. These are manufactured and supplied as per the specific market demands. We offer these in varied specifications as per the requirements of our esteemed clients. These are widely used for manufacturing superior quality carbon steel plates with consistent and controlled properties. BENEFITS   Corrosion resistant High skid resistance Bright clean surface Sturdy construction Weather resistant   APPLICATIONS Construction and cement firms Structural applications Industrial flooring Automobile industry Gratings over closed gutter

Our customer can avail from us a qualitative range of CRGO Sheet, which are fabricated from high grade of raw materials. This range is available with us in various dimensions, sizes and lengths. The product range offers utmost efficiency, easy installation and removal and trouble free operations to our clients. We hold expertise in the manufacturing, retailing, supplying and exporting of the wide range of CRGO Sheets, which is widely used in telecommunications industry, steel industry, iron industry and power supplies companies. Our product range is basically used for power / Distribution transformers lamination's. These are specially designed to meet the desired specifications of our prestigious clients. Special Features : Highly durableOptimum efficiencyEasy to install & removeSturdy constructionTrouble-free operation Applications : Power SuppliesSteel industryIron industryTelecommunications industry

• Length: 1-7 mtr
• Material: Nickel Chromium
• Thickness: 0.1 mm-40 mm
• Width: 500-2000 mm

Simplex Metal are among some of the most trusted names in the industry engaged in manufacturing and exporting a wide range of EDD Sheets. These sheets are manufactured using high grade raw material that makes them durable. Our range is highly acclaimed by the clients for their dimensional accuracy, durability and many other features. Our range is tested before supplying to make sure that they comply with the industrial standards.

Hot rolling is a metalworking process that occurs above the re-crystallization temperature of the material. After the grains deform during processing, they re-crystallize, which maintains an equated microstructure and prevents the metal from work-hardening.The starting material is usually large pieces of metal, like semi-finished casting products, such as slabs, blooms, and billets. If these products come from a continuous casting operation the products are usually fed directly into the rolling mills at a proper temperature. In smaller operations, the material is at room temperature and must be heated. This is done in a gas- or oil-fired soaking pit for larger work pieces and for smaller work pieces induction-heating is used. As the material is worked the temperature must be monitored to make sure it remains above the re-crystallization temperature.To maintain a safety factor a finishing temperature is defined above the re-crystallization temperature; this is usually 50 to 100 °C (122 to 212 °F) above the re-crystallization temperature. If the temperature drops, the material must be re-heated before hot rolling. SPECIFICATIONS SIZE Thick 20.00 mm to 100.00 mm Width 750mm to 2000 mm length 2500 mm to 12500 mm   IF SLIT COIL Thick 20.00 mm to 100.00 mm Width 1250 mm to 2500 mm Length 2500 mm to 12500 mm GRADE 2062 GradeBoiler Quality. APPLICATION Boiler & Pressure VesselsShip BuildingRailwaysHeat ExchangersOil & PetrochemicalsCoal & MiningGeneral & Heavy Engineering.

• Type: Metal Foil
• Material: Metal
• Application: Food Wrapping, Parlour Use
• Color: Metalic, Silver
• Feature: Durable, Eco Friendly, Fine Finished, Freshness, Good Quality, Heat Resistant, Maintain Temprature
• Width: 10-15Inch, 15-20Inch, 5-10Inch
• Texture: Smooth
• Packaging Type: Paper Box
• Packaging Size: 15mtr, 9mtr

• Material: Mild Steel
• Surface Treatment: Cold Rolled
• Thickness: 0.4 mm
• Shape: Rectangular
• Width: 750 mm

In metalworking, rolling is a metal forming process in which metal stock is passed through a pair of rolls. Rolling is classified according to the temperature of the metal rolled. If the temperature of the metal is above its recrystallization temperature, then the process is termed as hot rolling. If the temperature of the metal is below its recrystallization temperature, the process is termed as cold rolling. In terms of usage, hot rolling processes more tonnage than any other manufacturing process and cold rolling processes the most tonnage out of all cold working processes. There are many types of rolling processes, including flat rolling, foil rolling, ring rolling, roll bending, roll forming, profile rolling, and controlled rolling. The firm (Group) also trades into CR/HR Sheets

• Material: Aluminium
• Shape: Rectangular, Square
• Usage: Building Floors And Steps Etc.
• Color: Silver
• Finishing: Polished
• Thickness: 0.18mm-0.25mm

• Material: Mild Steel
• Color: Grey
• Type: Steel Plate
• Thickness: 1.6mm To 100mm
• Brand Name: SAIL, JINDAL, TATA,ESSAR ANM
• Usage/Application: Industry
• Material Grade: IS 2062 GR E250 / E350

Metal perforated sheets, We are manufacturing a wide range of Metal Perforated Sheets that are used in various industrial applications. These are made from premium grade raw materials and are available in straight and staggered pitch to suit the client’s requirements.

Neck guard, shoulder pauldrons and besagews combined together makes a unique metal neck plate, used by the warriors for covering their neck, shoulders and armpits. The brushed metal neck plate is considered an excellent addition to a breast plate, chain armor and leather armor, as it was used to provide maximum protection to the knights. Flawless replicas of these neck plates offered by us have made us stand in front row with the row ranking armour neck plate manufacturers in mumbai maharashtra. Material of construction carbon steel & leather.

LUSTER Metallic Foils are used widely to generate interest and add value to paper packaging, graphic arts products, plastic promotional materials. LUSTER has a wide range of bright silvers & golds, satin silvers & golds and a full range of metallized colors.

Niobium Sheets, Forgings, Grey Iron Castings, Investment Castings

Hot Rolled Coils, steel, steel Products

• Drug Intermediates & APIs from : from CHINA
• BP/USP/EP: qty in Kg-MT-FCL

We are offering pure copper sheets. We have ready stocks in various parts of india.

Metal Name Plates, anodised label, engraved trophy, anodised aluminium label

cold rolled close annealed sheet, cold rolled close annealed coil

Ms Sheets, MS Channels, MS Round Bars, MS Square Bars, TMT Bars, MS Pipes

Hot rolled sheets

Profile Sheets, Color Coated Coils, Mangalore Tile Profile Sheets

Stainless Steel Sheet, aluminum extruded section