Metal Valves Dealers in Ashok Nagar, Mumbai

• STEP 1: Select the hydraulic cylinder that best suits the application.
• STEP 2: Select the series of hydraulic pump with adequate oil output and reservoir capacity to power cylinder.
• STEP 3: Select pump within series with the valve option that best matches cylinder, pump and application.  

CONSIDERATIONS: Will the valve be used with single or double-acting cylinder? Will the valve be mounted on the pump, away from the pump or directly into the hydraulic lines? Will the valve be manually operated or is remote control preferred? Is independent control of multiple cylinders, or hydraulic tools preferred? What directional control and pressure control valve functions are needed for the application?   Basic valve types include manually operated, air or solenoid operated and pilot operated. Special application valves for pre-stressing and post-tensioning are also offered. IN-LINE HYDRAULIC VALVES Load Lowering Valve - Provides precision metering for controlled return of the cylinder pistion.   Sequence Valve - Used when a cylinder in a multiple cylinder application must advance before any other.   Pressure Reducing Valve - Permits independent pressure control to two or more clamping systems operated by a single power source.   Shut-off Valve - For fine metering of hydraulic oil. Several may be used to control multiple single-acting cylinders.   Check Valve - Permits flow of hydraulic oil in one direction only.   Pressure Relief Valve - Used at remote location in a hydraulic circuit where maximum pressure requirements are less than the setting of the basic overload valve in the pump. Protects a hydraulic system against over pressurization.   Metering Valve - Restricts surges by restricting flow to a certain level; when flow subsides, valve reopens automatically. For systems using large cylinders or extended lengths of hose.   Pressure Regulator Valve - Permits external adjustment of operating pressures at various values below the internal relief valve setting of the pump.

• Valve Size: ½"--8"
• Material: Stainless Steel
• End Connection Type: Socket,Threaded, flange, butt weld
• Color: Silver
• Automation Grade: Manual
• Temperature Pressure: 150#--2,500#
• Media: Air Fitting

• Valve Size: 2 to 24 inch
• Brand Name: Audco
• Material: Cast Steel
• Certification: ISO 9001:2008 Certified
• Country of Origin: India
• Media: Air,water,gas
• Temperature Pressure: High Temperature Pressure
• Type: Industrial Valves
• Condition: New
• Automatic Grade: Manual
• Warranty: 1 Year
• Usage: Water,gas,air
• Driving Mode: Manual
• End Connection: Flanged end, Butt weld

Falcon engineers is the leading manufacturing and exporter of cast steel gate valves. Our premium quality cast steel gate valves are being consistently demanded by clients spread across the globe. Manufactured using high grade materials, the cast steel gate valve offered by us is appreciated for its quality across india and the world. features bs - 1414 / api-600 / api-6d / ansi b 16.34face to face as per ansi b 16.10ends flanged & drilled as per: ansi b 16.5 r.f.tested as per bs : 6755 / api 598 available in class 900 & 1500 accessories provided actuator operatorextension stem hydrostatic air pressure 150 32 kg / cm26kg / cm222 kg / cm2600 158 kg / cm26 kg / cm2116 kg / cm2300 79 kg / cm26 kg / cm258 kg / cm2 applications households systemssugar millsfluid systemscement plantfertilizeroil & gaschemicalpharmaceutical etcpower plant

• Material: Mild Steel
• Pressure: Medium Pressure
• Finishing: Coated

We make available the products using the exceptional quality raw material that is experts certified. This makes our product range completely reliable and genuine. We have developed several offline as well as online options for the convenience of clients to ensure faster trade.

• Material: Forged Steel
• Color: Black
• Condition: New
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Size: 150-200mm, 50-100mm
• Feature: Good Quality
• Type: Forged Steel Gate Valve
• Weight: 10-15kg
• Country of Origin: India
• End Connection: Butt Weld, Flanged, Screwed, Socket Weld Ends

• Country of Origin: India
• Size: #150/ #300/ #600rnrn
• Material: Cast Iron
• Certification: ISI Certified
• Application: Industrial
• Color: Grey
• Pressure: High
• End Connection: Flanged, Screwed
• Brand Name: HAMA

• Brand Name: MIV
• Size: 2-16 inch
• Material: Stainless Steel
• Material Grade: SS 304
• Usage/Application: Industrial
• Media: Water
• Packaging Type: Box
• Minimum Order Quantity: 1 Piece

• Material: SS304, SS316
• Port Size: 1/2 to 2 inch

enriched by our vast industrial experience in this business, we are involved in offering an enormous quality range of ball valve ss screwed 12" specification: material: ss304, ss316 size: 12 to 2 inch operating type: manual, pneumatic, electric applied industries: dairy, cosmetic, pharmaceutical connection type: weld, clamp, flange

• Brand Name: SAINATH FIRE
• Size: 1" AND 3/4"
• Minimum Order Quantity: 50.0 No
• Model: SNF100

Needle valves are available in IB, HB, HP, SB, & Mini Series. 2 - Available in SS 316, Brass, CS, Monel & Hastralloy Materials io forged & bar stock construction. 3 - Variety of end connection :- Male & Female NPT, BSPP, BSPT, ISO tepered ends & Spraytech tube fittings. 4 - Maximum working pressure upto 20,000 psi (1406 Bar). 5 - PTEF Standard gland packing, Alternative graphoil packing for high temperature Max. temperature upto 538°C (1000°F)

Manufacturing Facilities; State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate I SO, 9001-2008 certified operations. Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED. Facility and products approved by Global Engineering Consultants and Contracting companies. Well-equipped testing and inspection facilities. World class finishing and packagind processes Well documented and appropriately preserved inventories. And above all competent and caring human resources. Ball Valves Floating ball Valves: Carbon steels, stainless steels and variety of alloy steels. Two piece and three piece designs. Soft seated and metal seated; 150, 300 and 600 lbs in cast version, 800 lbs in Forged Bar. Full Bore and reduced bore; sizes ½" to 8". Trunnion-mounted Ball Valves Carbon steels, stainless steels and variety of Alloy steels. Two piece and three piece designs. Soft seated and metal seated. 150, 300 and 600 lbs in cast version- in forged Sizes: 3" to 24" Butterfly Valves Wafer, Lugged and Flanged: - Cast iron, Cast Steel and Stainless Steel Body; Moulded seat, Pressure classes 125 lbs and 150 lbs. Sizes: 3" to 24" Triple-offset, Metal seated: - Carbon steels, Stainless Steels and variety of Alloy steels, Pressure classes 150, 300 and 600 lbs Sizes: 3" to 24" Gate, Globe and Check Valves In cast version: Carbon Steels and Stainless Steels, 150, 300 and 600 lbs sizes ½" to 12" In Forged: Carbon Steels, Stainless Steels and Alloy Steels, 150 to 2500 lbs sizes ½" to 2"

  CAST STEEL GLOBE VALVE (PRESSURE SEAL BONNET)   “VALTECH” robust design, Cast Steel Pressure Seal Globe Valves are designed and manufactured with reference to Standard BS-1873 for Pipelines 50NB and above. They are available in Flanged and Buttweld ends. Hard Faced Trim material ensures perfect Sealing and longer life. Lapped Back Seat is provided to ensure re-packing/replacing of Gland Packing in stream, when the Valve is in full open condition which ensures maximum safety, convenience and economy. If required, Valves can be offered under any THIRD PARTY INSPECTION . “VALTECH” Cast Steel Pressure Seal Globe Valves are available in various materials like Cast Carbon Steel conforming to ASTM-A-216 Gr. WCB, Cast Alloy Steel like ASTM-A-217 Gr. WC-6 / WC-9; and Cast Stainless Steel like ASTM-A-351 Gr. CF-8, CF-3, CF-8M & CF-3M. Size range starts from 50 NB through 300NB and pressure rating from 900# to 2500#.

• Brand Name: BRILLIANT
• Port: JNPT NHAVA SHEWA
• Packaging Details: Export Quality Packaging
• Place of Origin: Maharashtra, India

Material :Carbon Steel, Alloy Steel, Stainless Steel, any other special material,Note,OS & Y Type, Bolted Bonnet or Welded Bonnet, Full bore or Reduced bore, Moulded pre compressed Graphite ring packing

• Size: standard size
• Type: clamp in brass valve
• Product name: truck valve
• Place of Origin: Zhejiang, China (Mainland)
• Fit: truck
• Port: Ningbo
• Packaging Details: package of truck tire valve stems carton
• Supply Ability: 500000 Piece/Pieces per Month We deliver truck tire valve stems within 30 days as usual
• Core chamber: ordinary core chamber

S.S. Butterfly Valve and S.S. Soft Flap Valve for Tablet Container The sanitary butterfly valve is designed to handle powders and granules and can be installed on bins or vessels, containers and pipes Capacity : Dia. – 75 mm. to 400 mm.

Size Range : Flanged Ends - 15 mm to 250 mm Screwed Ends - 15 mm to 80 mm. Design Standard : BS 5158 Face to Face : BS EN 558 -1 Testing Standard : EN 12266-1 (BS 6755-1) Pressure Rating : Class 125 Port : Two Way Three Way Four Way MATERIAL OF CONSTRUCTION : Body Cover & Gland : Cast Iron to IS 210 Gr. FG 220 Plug : Cast Iron to IS 210 Gr. FG 220 or Cast Steel to ASTM A 216 Gr. WCB Shim : Mild Steel, Nickle Plates Gland Packing : Rubberised Asbestos Gasket : Compressed Asbestos END CONNECTIONS : Screwed : BSP as per BS 21 Flanges : To match flanges drilled to BS 10 Table D, F and ANSI ASME B 16.10 Class 125 Drilled to DIN 2532 PN 10 or PN 16, BS 10 Table E or BS 4504 PN 10 Valves can also be offered with undrilled flanges.

Application Rotolock valves are Compatible with all CFC, HCFC and HFC Refrigerants, mineral oils, Alkyl Benzene, POE lubricants and Industrial fluids non-corrosive to steel and brass. (With suitable Gland/Seal). Materials of construction Valve Body: Hot Forged Brass (BS-218). Rotolock sleeve: Hot Forged Brass (BS-218). Rotolock Nut: Hot Forged Brass (BS-218). Spindle: Stainless Steel 304. Gland Nut: Free cutting Brass Gland Packing: Graphite and Neoprene Seal Cap: Plated steel / ABS Seat : Stainless Steel 304 Rotolock Gasket: Teflon Springs: SS 304 Solder: Silver solder 42%   Design Forged Brass body and parts with SS 304 internal components minimize chances of corrosion in all conditions and allow easy brazing with copper tubes. All ports are integrally forged and the only brazed joint is the rotolock sleeve. This minimizes chances of leakage. Brass body and SS 304 floating internal seat allow metal to metal seating on dissimilar metals resulting in positive isolation and virtually lifelong durability. Stem with full back seating and graphite and neoprene seals allow gland packing to be changed in open position and brazing without disassembling the valve. No coatings are used on the Valve and internal parts. Graphite, Neoprene and Teflon seals are available as standard accessories. Operation & Testing. Maximum working pressure 450 psig. Working Temperature Range: (-30°C + 100°C). Individual pneumatic Testing in Open/Close position at 450 psig. Valves suitable for operation at 650 psig can also be provided on request.

• Weight: 120 g
• Connection Type: 1/4 inch Flare
• Operating Temperature: -35deg C - 90deg C
• Operating Pressure: 400 PSI(max)
• Item Code: CAV-76

• Stem and Stem nut: Stainless Steel AISI 316.

Manual Operation:Hand lever type upto 33053605 Actuator, Side hand wheel from 33063606 Actuator onwords.Application:For air, water, oil, gas, Corrosive chemicals, Combustion equipment, Power stations, Hydro Electric Power Generation, Chemical and Petrochemical Industries.

• sizes: ½" to 12"

In cast version: Carbon Steels and Stainless Steels, 150, 300 and 600 lbs sizes ½" to 12" In Forged: Carbon Steels, Stainless Steels and Alloy Steels, 150 to 2500 lbs sizes ½" to 2".

• Design ::  
• API 6D / API 594 / ASME B 16.34:  
•  :  
• Face to Face ::  
• API 6D / API 594:  
•  :  
• Flanges ::  
• -:  
•  :  
• Butt welding ::  
• -:  
•  :  
• Testing ::  
• API 6D / API 598: Material
•  : ASTM Specifications Carbon Steel, Alloy Steel, Low Temperature carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, any other special material.
•  :  
•  : Trims :
•  : Varieties of combinations
•  :  
•  : Operator :
•  : -
•  :  
•  : Note :
•  : • Lesser weight, smaller size and lesser force to    open.
•  :  
•  : Optional :
•  : Replacement of conventional check valves without pipeline modification, Retainerless Design

We manufacture and export grade Forged Steel Bellow Seal Gate Valves S/W with complimentary accessories. It has won critical acclaims for its technically engineered structure. Technical DataValve Designed to BS-5352 (Reduced Bore)Valve Tested to API- 598 / BS- 5146Socket Weld Ends to ANSI-B-16.11Butt Weld Ends to ANSI-B-16.25Screwed Ends to ANSI-B-1.20.1 (NPT)End to End as per Manufacturers SpecAccessoriesHand Wheel Locking ArrangementActuator Mounted ValveNotesValve upto 50mm NB are from ForgingOptional Full port Design upto 40mm NBAlso Manufatured in Grade F 304L / F 316LOptional Stellited Seat & PlugOptional Screwed Ends Optional Butt Weld EndsOptional Socket Weld EndsAlternate Bellow Material= HC-276/ Inconel-625

Design standard:API 602/BS5352 The length of the structure:length of structure of socket welding / thread end of forged steel gate valve is manufactured by factory standard The length of structure of flange/ butt welding end of forged steel gate valve is manufactured by ASME B16.10 Flange connecting end:ASME B16.5 Butt welding connecting end:ASME B16.25Wall thickness:API 602/ASME B16.34 Inspection and test:API 602 Pressure and temperature rating:ASME B16.34 Product scope:NPS ½″~NPS 2″,CL150~CL4500 Drive device:handle, bevel gear, electric, pneumatic, etc.

Hand Operated Forged Carbon Steel Valves, Reflux Valve

Cast Steel Valves, Welding Electrodes, Oil Lubricant, Valve