Micky Rubber Technoligies Goregaon East, Mumbai, Maharashtra

Exercising can be Fun if the Equipment is Easy to handle Ergonimically Designed Well Balanced Eco- Friendly Aesthetic Scented Keeping these factor in mind we have developed & introudced a range of equipments namely.DUMBBELLS, PLATES, METAL HANDLES In Encapsulated Rubber, Stainless STell, Chrome Plated & Standard Steel with powder coating quality.We are ahead of our competitors as we have our in-house tool room, which allow us to make equipemnts of any design of any size & any quality at cost effective rates. This has helped us to develop a full range of products available in Pounds & Kilograms.The innovative designs are easy to handle & the soft rubber material makes it easy on the hands of the user, gives better grip, making it safer. The rubberized equipment will not rust. This makes them more durable & longer lasting.SPECIAL FEATURES   Permanently attachment doesn't allow the grooves to loosen. Bolted for safety. No welded parts. Stylishly Knurled handles give better grip. Unique contour handles give better lifting balance. Machined holes for a standard & tight-fit. No tilting during lifts. Vibrant colours & ergonomic designs give a refreshing and sophisticated look. Scented rubber gives a pleasant smell as opposed to the offensive smell given by others. Quality assurance is in the form of an unconditional 5- year warranty against maintenance. Rubber coating helps in reduction of noise & does not damage/scratch floors or equipments. Our products don't chip. flake and peel off so no sharp edges are created. Accurate plates & weight measure variation of +/-5%. Specially formulated rubber is of high0-strength, is tear resistant & highly abrasion resistant. RANGE Items are available in 1 kgs to 30 kgs. with 1/2 kg increments. Items are available in 20 Ibs. to 120 Ibs. with 5 Ibs. increments.

JU TYPE Tubing Stripper Rubbers are made from a proven oil and abrasion-resistant rubber. Tubing can be pulled on run-in with pressure still on the well while also stripping fluids off the tubing O.D. to provide a cleaner job site.

The Thread Protectors are designed to provide protection to the connections during handling and transportation, and to prevent debris from entering the threads and tube body. The threads are made in such a manner that they cover all the threads of the connections and prevent the thread protector from stripping or vibrating loose. Our thread protectors are made of Nitrile Rubber having high tensile, self lubricating, high temperature & oil resistant properties, upto 90f+5˚A hardness. The rubber material used makes it lighter and rust free compared to metallic protectors.

Rubber Clamping Block are used for clamping of BOP Hydrualic Hoses of different sizes. They are used for clamping of 5 different of hoses starting from 53 mm to 70 mm. The clamps/blocks are made of rubber bonded with galvanized steel plates and an eyebook at one end of the block. They are made of specialy formulated Natural Rubber, which is Abrasion Resistant. We can make these clamping blocks according to your specifications.

We manufacturer Bladders having pressure ratings of 100kgcm² to 128 kgcm². They are used in condensate, Glycol recirculation pumps, life boats, Bildge pumps etc. (DMW ( Union Pumps F Peroni etc.)

They aid in keeping hydrocarbon seepage to a minimum while under pressure. They clean rods of excessive oil and waxes to provide a safer working environment. Size: 5.15" O.D. 0.609" LD.  

Expansion joints are used for compensation of pipeline movements and vibrations. PTFE Expansion Joints are used in highly conentrated acidlines, as PTFE is chemically inert & flexible. They are designed to withstand 10kg/cm of pressure with moulded steel ring on the each corrugation / arch with steel flanges at both ends.

They are made of specially formulated compounds which are tough and have along life. Oil States Oil Saver Rubbers are molded from a special compound of oil, gas and abrasion-resistant rubber for long service life. Oil and other fluids are removed from the wireline and allowed to re-enter the well, which helps prevent potential well-site contamination. Our savers are supplied in different colours viz red, green, blue etc. They are made of hardness ranging from 35° to 55° A.  

Hydro Cyclone Cones are basically to separate liquid from earth. During suction it is very critical to have a system that will operate efficiently. We manufacturer Hydro Cyclone Cone Assemblies i.e. Desanders and Desilters. The separation process is carried out by employing centrifugal forces. The angle of the fluid entry has been specifically designed to facilitate the flow and separation. The Cones are made of high durameter polyurethane with optional steel inserts, which ensure consistent productivity.Desander Cones remove abrasive, coarse solid particles upto 60 microns.Desander Cones are available in 10" attachments with a 4" inlet and a 6" outlet.Desilter Cones remove fine sand and silt down to 20 microns.Desilter Cones are available of 4" size that have a 2" inlet and a 2" outlet.  

Demco Gate Valves are specifically used in high-pressure mud applications and other corrosive services.We manufacturer the spares of these valves, which are Seats, Gates, Stem, Screw etc. Demco Gate Valve Seats are designed for tight shut off after exposure to abrasion and erosion. These Seats consist of two identical metal wear rings encapsulated in rubber to form a cylindrical shape with a gate slot and two round ports. The closed Gate bears on the downstream wear ring while the rubber provides a drop tight, pressure responsive seal around the port. This seal is fully effective even when the Gate and the Seat ring are scored or abraded. The cylindrical assembly fits into the matching body cavity and is expanded outward towards the valve ports by the bonnet, which engages pin extensions from both wear rings. This seals the Seat against the body, around each valve port.

Expansion Joints are used for compensation of pipeline movements and vibrations Similar to a tyre it has layers of high-quality elastomers reinforced with steel wires and synthetic fabrics. The inner layer forms a tube that extends through the inside of the joint, and across the face of the end flanges. This layer is chemically compatible with regards to its abrasion resistance and temperature rating to the process material. The middle layer of the joint contains the bias-ply synthetic fabric reinforcement that gives the joint its form and pressure rating, with wires used for added strength.The outer layer is environment compatible usually made of Neoprene, which allows the joint to stand up to contacts with oils, corrosion and weathering. Galvanized or stainless steel retaining rings are provided to protect the flange and distribute forces evenly.

Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance to cutting, tearing and abrasion. They are available for water based and oil b ased drilling mud. Designed for application to Drill Pipe where a solid master bushing is used.We manufacture both Dual Split and Single Solid Type of Drill Pipe Wipers.Dual wipers are made with a spring steel reinforced ring. The split in the dual wipers allows are wiper to be threaded easily onto the pipe.Our split type wipers offer the advantage of a symmetrical, one piece design with multiple wiping action. it provides more than two full turns of continuous wiping surface around the full circumference of the pipe. Unlike split tyep wipers, there are no gaps, in the inner wiping edge to leave unwiped streaks on the pipe.Single Solid Wipers have a series of concentric rings moulded around the inner wiping surface. Each ring carries a specific size, identifying the area of the center hold to be cut out for a specific drill pipe size.

The Hydro Pneumatic Accumulator is a device designed specifically for the storage of the liquid under pressure. For this purpose Accumulator Bladders are use which provide an affordable means of enhancing the performance of the hydraulic system. They are suitable for storing energy under pressure, absorbing hydraulic shocks and dampening pump pulsation and flow fluctuation. As liquids are, for all the practical purpose incompressible, the objective is achieved by utilizing the compressibility of the gases. The quality of the Accumulator Bladder is that they operate efficiently with regards to maximum working pressure, temperature range and capacity in litres.

BJ Type Diverter Valve Packers are made in different sizes i.e. 40" Dia x 6" Ht. and 40" Dia x 14" Ht. Rubber Packers are with steel rings moulded at the bottom of each side. These are used in Diverter Valve Packers with a pressure rating of 150 psi. They are made of Nitrile Rubber of 70+/-5° A hardness.Split/Solid Type Packers are made of approx. 26" Dia x 14" Ht. They are used in Riser Tensioner Systems mostly used of Floaters. They come in Split as well as Solid Type. Their pressure rating is 150 psi. They are made of Nitrile Rubber of 70+ / -5° A Hardness bonded with steel rings and 2 'O' Rings for proper sealing.

Bell nipples are tubeless seals size 40" x ¾" having a pressure rating of 150 psi. These are used on the Bell Nipple Housing to hold the pipes in their place. Once pressurized, they grip the housing pipes in its place. They are tested of 225 psi. They are made of Nitrile Rubber (Oil-Resistant) with Brass Nipple at one end.

Arrow Union Seals are constructed of an inflatable oil-resistant (Nitrile) tube. They are used for mud suction return lines and low pressure fluid lines. When they are inflated through an automotive type air-valve, it seals the union. For effective sealing the fuel pressure should exceed the line pressure by 50 psi. Micky Arrow Union Seals make up fast and easily without close line up. This allow pipe expansion and proper alignmetn without breaking the Seal. The Seal can be broken by deflating the tube.

Safety is a major concern of any industry, especially in the oil & gas industry where the odds are heavily in favour of a mishap waiting to happen. These mishaps weigh heavily on the company in the form of lost workdays, increased insurance claims & above all loss of lives.Most skids occur on the leading edge of the step, especially when the metal, wood or concrete surface becomes to cover the leading edge, pro viding excellent traction, even in adverse conditions.Anti-skids offer the appropriate solution which help in reducing mishaps thereby translating into better performance, greater production & lowering costs.Anti-skids are Covers manufactured by a Multi-step-process, which ensures a longer life. They are covers prefabricated and ready to install over existing surfaces quickly.We have 6 grades of grit for different applications & numerous options of colors made in a variety of sizes & material. Features  Made for a variety of applications, they are supplied as per the required size, colour grade, substrate & application. Retrofit over existing surfaces. Being light makes it easy to install quickly thus saving time. Cleans easily with a non-solvent cleaner & stiff brush. The materials used are durable, with long-lasting protection. The two-tone colour makes for better visibility in all light conditions. They offer added safety by creating a contrast between the step edge & back of the thread. One (single) colour anti-skids are also made. Non-corrosive & impact resistant property: Specifically designed to provide anti slip protection in a variety of environments including oily offshore platforms, greasy food processing plants, wet residential decks, power generation plants & automotive stamping plants. Base material construction: We offer a selection of base materials, depending on your needs. They include; stainless steel, Galvanized Steel & FRP

The Hydro Pneumatic Accumulator is a device designed specifically for the storage of the liquid under pressure. For this purpose Accumulator Bladders are use which provide an affordable means of enhancing the performance of the hydraulic system. They are suitable for storing energy under pressure, absorbing hydraulic shocks and dampening pump pulsation and flow fluctuation. As liquids are, for all the practical purpose incompressible, the objective is achieved by utilizing the compressibility of the gases. The quality of the Accumulator Bladder is that they operate efficiently with regards to maximum working pressure, temperature range and capacity in litres.We manufacturer Bladders having pressure ratings of 100kg/cm² to 128 kg/cm². They are used in condensate, Glycol recirculation pumps, life boats, Bildge pumps etc. (DMW ( Union Pumps F Peroni etc.)Our Bladders made of Viton Rubber are used as pulsation dampener used in glycol reciprocating pumps which have high content of H2S and have a rating of 1450 psi.They are also available in Nitrile, Butyl, Neoprene and EPDM.Sizes and dimensions are made to orderAll Bladders are designed to sustain a pressure rating of min. 100Kg/cm²