MICROMOT CONTROLS Uttan, Mumbai, Maharashtra

We offer Ups Systems. POWER-PAC UPS or the POWER-PAC Uninterrupted Power Supply System is the latest product in the "MOTCO" range of Products with PWM IGBT technology. It is meticulously designed for complete protection of costly computers, compact in size, rugged and absolutely maintenance free. 1. Line interactive design 2. True esd protected mosfet based system. 3. Compatible with generators (diesel genset) 4. Cold start even at full load 5. Built-in brownout sags corrector 6. Overload & short circuit protection

We offer Synchronous Motors. SYNCHRONOUS MOTORS "MOTCO" make Synchronous Motors are constant speed machines i.e running at its synchronous speed. Synchronous motors are capable of being operated under a wide range of power factors, both lagging and leading. Hence, it can be used for power factor correction purposes, in addition to supplying torque to driven loads.

Rated Power : 1KVA TO 100KVA

Brand Name : Micromot Controls

Voltage : 220 V

Phase : Single Phase

MOTCO " make Slipring Induction Motors are nearly the same as normal Induction motors, except that their rotors are wound with windings. When three phase potential is applied to the stator winding a rotating magnetic field will travel around the inside of the stator core in indentically the same manner as in a squirrel cage induction Motor. The speed of the rotating magnetic field is dependent on the number of stator poles and the frequency of the supply source.

When three phase potential is applied to the stator winding a rotating magnetic field will travel around the inside of the stator core in indentically the same manner as in a squirrel cage induction Motor.  The speed of the rotating magnetic field is dependent on the number of stator poles and the frequency of the supply source. This synchronous speed is found using the formula S = 120F ÷ P. As the rotating field travels at synchronous speed, it cuts the wound rotor winding and induces voltages in these winding. On starting, all the resistance of Rotor resistance starter is inserted in the circuit.  With the increase in resistance in the Rotor circuit the impedance increases and therefore it might appear as though the rotor current would be less with the a resultant decrease in torque.  This results in maximum interaction between the two field and a strong starting torque. As the motor accelerated, steps of resistance are cut out of the Rotor resistance starter controller with all resistance cut out, the rotor slip ring are short circuited and the motor operate at rated speed in the same manner as a squirrel cage induction Motor. "MOTCO" group provides AC Drives of Siemens & ABB along with its complete control panel with MCB, indications, meters, push buttons & contactors enclosed in powder coated cabinet

When three phase potential is applied to the stator winding a rotating magnetic field will travel around the inside of the stator core in indentically the same manner as in a squirrel cage induction Motor. The speed of the rotating magnetic field is dependent on the number of stator poles and the frequency of the supply source.This synchronous speed is found using the formula S = 120F ÷ P.

Phase : Single Phase

Power : 1kW-100kW

Frequency : 50Hz/60Hz

Brand Name : Micromot Controls

Phase : Three Phase

Brand Name : Micromot Controls

Power : 3KW/ 5KW

IP Rating : IP23

Model Number : 1019

We offer Repulsion Motors. "MOTCO" make Repulsion motor is a single phase motor which has stator winding arranged for connection to source of power and Armature winding connected to commutator and brushes on commutator are short circuited. Brushes are so placed that the magnetic axis of Rotor winding is inclined to magnetic characteristic to change the Direction. Repulsion motor is continuously rated, screen protected, self ventilated machine in EB class Insulation and confirms to IS4722. Capacity : 0.37 0.75kw Rpm : 2880 Voltage : 230V Single phase AC 50Hz.

We are the leading manufacturers, exporters and supplier of this products.

Brand Name : Micromot Controls

Speed : 1200RPM

Material : Mild Steel

 MOTCO " make Semi-Traction motors are suitable for applications which demand a high starting torque. Semi-Traction motors are basically Series DC Motors Common uses of the series motor include crane hoists, where large heavy loads will be raised and lowered and bridge and trolley drives on large overhead cranes.  The series motor provides the starting torque required for moving large loads. Traction motors used to drive trains are series motors that provide the required torque and horsepower to get massive amounts of weight moving.  

" MOTCO " make Identical sets of DC Shunt/ Series motors for performing various tests.

We offer Geared Motors. "MOTCO" make DC Motors are available with different Performance Characteristics and accordingly are classified into SHUNT SERIES & COMPOUND Motors. Geared motors are required for applications that run at low rpm with high torque. DC Motors coupled with various forms of Gearboxes serve the purpose very effectively.

Application : Power Distribution/Protection

Power : 1kW-400kW

Voltage : 3.6-12kV

Material : Aluminum

Brand Name : Micromot Controls

Dynamometers are used to measure HP and Torque of rotating Machines such as : electric-motors, engines, different types of pumps rotators etc. TECHNICAL ASPECTS of "MOTCO" make DYNAMOMETERS : DESIGN : Our Designs, parts & Dimensions are as per I.S.I Standards. Latest Innovations are  incorporated. Changes are made with times and also as per Customer demands. FRAME & ENCLOSURE : Our Steel made Frames ensure greater strength & standard type production. Ventilation is provided by strong fan. In case of excess heat due to low speeds, Blower Mounting arrangement are provided for necessary Cooling. WINDINGS : The Shunt Coils are wound in such a way with  Main Pole that, solid inter-pole & main-pole base would withstand any type of vibration. Coils made of copper conductors are insulated & then vaccum impregnated with high grade varnish ensuring resistance against acids, oil & moisture. COMMUTATORS : Manufactured Cylindrically, with hard-drawn copper and V-Groove segments of high conductivity, insulated by a mica sheet in between. Complete commutator is baked for high temperature testing. BRUSH BOX & BRUSHES : Brush Gear is made of strong, special design- but with simple construction- making it possible for shafts to rotate easily at low speeds with noise-free service. Provision for easy access to replace and adjust the brushes is provided. Brushes are of standard grades, ensuring sparkless commutation. ARMATURE : Armatures are built of high quality Standard Steel Laminations, Securely insulated from each other and clamped together under high pressure ensuring low heating losses. Coils and wire-winding is strictly as per insulation class 'B'. Armature is tested for Dynamic Balancing. Resin Binding means full protection of Armature in all respects. TESTING : Our all products are thoroughly  & vigorously tested on special Heavy Duty Test Bench and Dynamometer. All continuously rated Motors & Generators are tested on Full Load for more than Five Hours (HEAT RUN TEST) for temperature rises and the same are not permitted  to exceed values prescribed as per I.S. 4722. All windings are put to insulation test with lowest rate of 1.5 to 2 KV.

Frequency : 60 Hz

Brand Name : Micromot Controls

Phase : Single Phase

Our Steel made Frames ensure greater strength & standard type production. Ventilation is provided by strong fan. In case of excess heat due to low speeds, Blower Mounting arrangement are provided for necessary Cooling.

MOTCO " make DC Starters in 2point, 3point & 4opint configuration for series, shunt & compound motor starting.   

Brand Name : Micromot Controls

Speed : 750-3000 RPM

Type : Self Excited-Shunt

Shunt series compound dc motors "motco" make dc motors are available with different performance characteristics and accordingly are classified into shunt series & compound motors. Dc motors have definite applications in today's industry. Each type offers specific characteristics and strengths, depending on the task at hand. Shunt wound motors are the most widely used as they have a linear characteristic of voltage & torque. Shunt motor has more constant and controllable speed over various loads. Series wound motors are used for high starting torque applications. Series motor has greater torque capabilities compound wound motors are used for mixed load applications. The above two desirable characteristics can be found in the same motor by placing both a series field and shunt field winding on the same pole. Thus we have, the compound motor. The compound motor responds better to heavy load changes than a shunt motor because of the increased current through the series field coils. This boosts the field strength, providing added torque and speed.

MOTCO " make DC Motor Trainer available in two combinations consisting of 1) DC Motor Dynamometer trainer & 2) DC Motor Eddy brake trainer.The Dynamometer -Performance Testing - Performance of a DC Motor - Performance of a DC series Motor - Load Characteristics of a DC Compound Motor - Performance of a three phase 4 Pole induction Motor - Performance of a single phase Capacitor Motor"Motco" make DC Motor Trainer set.    A) Machine Assembly.Assembly of the test machine mounted on a common base frame and coupled together with easily detachable coupling.The whole assembly is housed in the machine compartment of the workbench.The assembly consist of the following:i) DC Shunt motorii) Eddy current brake Benchtop console- Constructed with powder coated MS. B) Plug in units - A series of plug in which is to be housed in the bench top console.Experimental test circuits can be achieved by patching together the desired terminals of these plug-in.This series consists of following:AC/DC Power supply.Each terminated at safety terminals.Control MCB 10A and indicating light.DC motor panel

"Motco" brand drives have been serving the industries since 1980 and have developed a reputation of its own class and quality. Equipped with the most latest techniques, designs & materials these drives have found their positions in the international markets as well. We manufacture dc drives in two broad ranges : 1) thyristor drives & 2) manual rectifier drives