Monoblock Pumps Dealers in Jogeshwari West, Mumbai

PP Monoblock Pumps manufactured by us are used to relocate or circulate Hydrochloric Acid and Sulphuric Acid, Chemicals, and Corrosion Liquids. The Design of pump and motor is been Compacted to do minimize space. It gives high head & capacity. Monoblock Pumps are small, economical and easy to operate. Our Monoblock Pumps are highly proffered in Petro Chemical & Paint Industries, Metal finishing, and Fertilizer, Chemical Transfer and Water Treatment plants. These PP Monoblock pumps are excellent in performance and have minimal maintenance and almost no vibrations. This Pumps are Installed effortlessly and are of incredible durability. Our Monoblock pumps are at very affordable rates. PP / SS316 / PVDF series Pumps are specially designed for highly corrosive chemicals. Where Magnetic Drive pumps are not recommended or its cost is higher this Pumps are Used. The Monoblock series pump design is single One-piece moulded polypropylene volute casing. The Impeller is of the semi-open type to ensure a smooth running performance against corrosion. The high alumina ceramic sleeve protects shaft to any corrosion and abrasion. The GFT or Sic Vs Ceramic PTFE below Mechanical seal prevents the leakage from the pumps. The Cast Iron heavy duty oil lubricated bearing housing provide maximum strength to pump. Monoblock type PP Pumps which are small, economical and easy to use and maintain. Ideal for transfer of corrosive liquids, pharmaceutical products, food and dairy products, chemical transfer and filtration etc. These pumps are specially designed to give high head & capacity. Std. pumps are available with PTFE gland packing and NFLP motor. The flameproof motor can be supplied on request. We are Prominent PP Monoblock HCL Acid & Sulphuric Acid Pumps Manufacturers and Suppliers in India. The other Cities in which we supplie are Bengaluru, Mysore, Hubli-Dharwar, Mangalore, Belgaum, Gulbarga, Davanagere, Bellary, Bijapur, Shimoga, Tumkur, Raichur, Bidar, Hospet, Hassan, Gadag-Betigeri, Udupi, Robertson Pet, Bhadravati.

• COMPACT: VACUUM-710 MM HG

We are manufacturer of Mono-block Type Single Stage Water Ring Type vacuum Pump.

Turbo Vacuum Pumps are of the oil immersed rotary vane type V belt driven machine. A stator with an eccentrically mounted rotor within Turbo Vacuum Pump from the main assembly. The rotor has two vanes facing each other. There are springs in between the two vanes. As the rotor revolves these springs press the vanes against the inner wall of the stator and make them move in and out of the rotor as the rotor revolves by means of a driving shaft sweeping the air space twice per revolution. Material of construction is property chosen graded cast iron and all the parts are precisely machined micro finished and assembled to close tolerances for high efficiency   accessories for "turbo blower" vacuum pumps non return valve it is provided for preventing body leakages with the help of spring tensioned rubber diaphragm. The rubber diaphragm prevents back flow of oil when the pump is not in motion. Air vapor in the pump so that contamination of oil is avoided. Moisture trap available in c.i.al with detachable glass. The moisture in the air is absorbed by this trap before entering into the pump. Inlet dust filter vacuum gauge with regulator this filters dust particles down to 20 micron size. This is being used as to maintain any desired vacuum in the system. It is graduated from 0 to 30 inches in mercury. Guarantee service after sales with one year guarantee against manufacturing defects. Note models up to me-15 are air cooled type & provided with single phase motors. Models from me-16 onwards are provided with water cooling jackets and 3 phase motors

DETAILS • Compact, reliable and powerful • Space-saving and ideal for systems integration • High pumping speeds with small dimensions • Gas ballast valve to pump little water vapour • Oil-anti-suck backdevice for convenient starting • Efficient air cooling system • Eco-friendly exhaust gas free of oil mists • Quiet, low-vibration operation • Easy to maintain APPLICATION Labocon Rotary Vane Vacuum Pump is used for vacuum packaging, drying, distillation, plastic moulding etc.

Highest pumping performance Wide range of models from 200 l/s to 4,000 l/s Magnetic Leviated and Ball-Bearing type models Unique cart design for TMP with Dry Pump Designed to suit Research as well as Industrial applications Over 10,000 installations worldwide

• Pressure: Low Pressure
• Fuel: Vacuum Pump Oil
• Voltage: 380V
• I Deal In: New Only
• Ultimate vacuum: 50Pa
• Pump speed: 1440r/min

Turbo Vacuum Pumps are of the oil immersed rotary vane type V belt driven machine. A stator with an eccentrically mounted rotor within Turbo Vacuum Pump from the main assembly. The rotor has two vanes facing each other. There are springs in between the two vanes. As the rotor revolves these springs press the vanes against the inner wall of the stator and make them move in and out of the rotor as the rotor revolves by means of a driving shaft sweeping the air space twice per revolution. Material of construction is property chosen graded cast iron and all the parts are precisely machined micro finished and assembled to close tolerances for high efficiency   accessories for "turbo blower" vacuum pumps non return valve it is provided for preventing body leakages with the help of spring tensioned rubber diaphragm. The rubber diaphragm prevents back flow of oil when the pump is not in motion. Air vapor in the pump so that contamination of oil is avoided. Moisture trap available in c.i.al with detachable glass. The moisture in the air is absorbed by this trap before entering into the pump. Inlet dust filter vacuum gauge with regulator this filters dust particles down to 20 micron size. This is being used as to maintain any desired vacuum in the system. It is graduated from 0 to 30 inches in mercury. Guarantee service after sales with one year guarantee against manufacturing defects. Note models up to me-15 are air cooled type & provided with single phase motors. Models from me-16 onwards are provided with water cooling jackets and 3 phase motors.

SEAL PROOF has indigenously developed chemical process corrosion resistant pumps in wide range of application. Seal proof pumps are specially engineered and designed to exceed the requirement of all industry. The surest way of conveying, mixing, transferring and propelling without leakage and without maintenance. All rotating parts are dynamically balanced results Vibration free operationLonger life of bearings – low noiseMotor designed for wide voltage range 300-450 volts hence no fear of burn out due to voltage fluctuation and additional advantage of space saving – elimination of base plate special coupling and its guard Applications Industrial ApplicationWater BoostingSuitable For Water Supply SchemeCommercial Complexes General Irrigation And Sprinkler IrrigationAir ConditioningHotelsCooling Tower

PP Centrifugal Monoblock Pumps, Electroplating Filter

Monoblock Pump, Mechanical Shaft Seal, Pvdf Pumps, acid pumps