Motorized Valve Dealers in Mumbai

Our Brass Motorized Valve - Actuators is being specially designed to control the flow of steam or coolheat water in central air-conditioning, heating. This are resistant to high moisture conditions and has removable head with two and three way type in numbers of models, sizes and in convenient designs having long life...Our Series of motorized valves - Actuators are smart, everlasting and works efficiently in any environment.

Designed and developed with perfection, our products are of unmatched standards. Having captured all markets of Mumbai(India), our company has emerged as an acknowledged provider of this product range.   Our Features : Design - Electrical Butterfly valve wafer type & lug Material -CS ASTM A 216 Gr. WCB, CI , S.G. Iron, CF8, CF8 M etc. Disc - CI,MS,SGI,SS304.SS316,GM,monel Trims - SS 304,304L, 316,316L Seat - EPDM, Nitrile, PTFE, PFA,FEP Action - Manual, Lever, Gear operated with electrical, Actuator Rating - ASA 150, 300, PN 10,PN16 Ends conn. - Flanged ends B16.5 Mfg. - BS 51551 API609/1S 13095 Testing - API 598 / BS 6755 Application - Air, Gas, Water, chemicals, Pharma, oil, acid, Foods, vacuum, heat treatment ,paper & sugar industries

• Material: Cast steel, stainless steel
• Country of Origin: India
• Size: 2 to 24 inch
• Brand Name: L&T

globe valve to ANSI/ASME with flanged or butt weld ends, with bolted bonnet, outside screw and yoke, flexible wedge, non-rising or rising stem and non-rising handwheel, Stellite hard-faced seat/disc interface made of 13 % chrome steel, with graphite gasket and gland packing, available in carbon steel, low-alloy steel and stainless steel.

• Power Supply: 220 V AC
• Fluid Temperature: 20 deg C to 80 deg C
• Regulating Type Signal Input: 4 - 20 mA
• Material of Construction: Steel
• Finish: Coated

Capturing the market with our exceptional product range, we are located in Dombivili(E)-421203(India) and cater to the wide market. Rest assured for the safety of the products as we have the best facilities at our end. In addition, we have appointed a responsible staff to keep a vigil eye over the same.Type : Synchroset/Synchropak Flame Proof/Explosion Proof Available coupled with gears for Quarter Turn Rotation.

Double eccentric structure design,reliable in sealing performance,simple and compact structure. Characterstics: Fire safe design,available in iron steel,stainless steel, etc. Size: 2-52"

Owing to our immense expertise in this domain, we have carved a niche as a Supplier of Motorized Butterfly Valves in the market. Our payment procedure is not only easy to operate but also guarantee secure transactions. In addition to this, it is featured with multiple options like cash payment, bank account transfer and more.

• Seat: Screwed type replaceable.

Gland Packing:Carbon filled Teflon for temp. Upto 220°C. Leakage :As per ASME 16.104 CI. IV (0.01% of Kv) for 5512A Series and Class VI Bubble tight for 5512B Series.Body Material:SG Iron-ASTM A536,Gr.60-40-18 (DIN 0.7043) (GGG40.3). CS-ASTM A 216 WCB, (DIN 1.0619 GS-C 25). SS-ASTM A351CF8M (DIN1.4408) (GX6 Cr.Ni MO1810) SS-ASTM A351CF8 (DIN1.4301).

• Material: Iron steel, Stainless steel.
• Features: Double eccentric structure design, Reliable in sealing performance, Simple and compact structure.
• Size Range: 2-52″.
• Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), Other

MOTORIZED 3-WAY ZONE VALVES WITH RETURN SPRING FOR HYDRAULIC CIRCUITS SERIES SF MAIN CHARACTERISTICS : These are powered by an electric motor and can assume two operating positions depending on whether the motor is activated or not. One or two auxiliary switches can be installed on request. These are activated when the valve switches. The Valves are equipped with an external lever for manually positioning the shut-off ball in its central positing. FUNCTION: Without electric power supply, the valve is positioned as shown in flig.1: Port A closed Port B open. The ball valve closes port a thanks to the elastic force exercised by the return springs. When it is powered, the servomotor overcomes the spring force and moves the ball form port A to B in about 20 Seconds and keeps it in that position until the electric power supply is shut off. When the electric power supply is shut off the return spring brings the shut-off ball back to port A. USING THE MANUAL LEVER: A lever is located on the side of the motor. This is used to position the shut-off ball in an intermediate positing (fig. 3). This is helpful when filling or emptying the heating system. The lever reset, form manual to automatic, takes- place automatically whenever the valve is electrically by activated. FUNCTIONAL CHARACTERISTICS : Rated supply voltage 230 Vac. (Available: 24, 110 Vac.; 50HZ) Absorbed power 5/6 W Degree of protection IP22 IES 529 Standards. European Standards Ref. CEI EN 60529 Aux. contact capacity 3 a, 250 Vac. Maximum differential pressure: See Refer to Tab. Of Hydraulic Characteristics Rated pressure PN 10 Kg /Cm (2) Flow temperature limits +5 / 110 Degree C Maximum room Temperature 60°C Nominal opening time 20 sec. Nominal closing time 6 Sec. Standard Cable Length 1000mm. AUXILIARY SWITCHES: A single pole micro switches (version M1), a two-pole micro switch (M1S version ) or two micro switches (M2 or M2 S version ) can be mounted on all versions.There is a special kit for mounting the single-pole auxiliary micro switch even in versions that do not carry it as an original part (M1 Kit.) .Kits M1S, M2 S cannot be installed in versions which do not mount them originally. MATERIALS : Valve body: Brass Valve cover: Brass Ball - bearing pin Brass Return Springs Stainless steel Motor cover Self - extinguishing ABS APPLICATION EXAMPLES 1 AS three -WAY ZONE VALVE The zone room thermostat controls opening and closure of the respective SF valves. When there is no demand it shut off power to the valve, which closes the zone and recalculates water back to the boiler return? Installing a meter as shown in the diagram permits efficient sub-division of operating costs. The load loss of the recirculation pipeline should be balanced to avoid excess flow rate variation in other circuit during valve operation.Note: Do not install the valve upside down, with the valve cover below the valve body, as it is a potential container for eventual leaks or water condensation. APPLICATION EXAMPLE GIVING PRIORITY TO THE HOT WATER HEATER We use this installation system mainly on combined boilers to permit the temperature of domestic hot water to be adjusted at the desired valve. The valve is used for priority over the heating system.

• Size Range: 1.1/2” to 48”
• Construction type: Double Eccentric Disc Design
• Body: WCB / CF8 / CF8M
• Disc: WCB / CF8 / CF8M
• Seat: PTFE (Metal to Metal On request)
• Shaft: AISI 410/ 304/ 316
• Plate Mounting: NAMUR Standard
• Pressure Rating: ANSI 150 Class, ANSI 300 Class(On Request)
• End Connection: Wafer/ Sandwiched
• Operating Temp: Range: -25℃ to 180℃(Soft Seating), -25℃ to 600℃ (Metal to Metal Seating)
• Operation: Hand Lever, Worm Gear box, Pneumatic Actuated, Electrical Actuated

• Brand Name: TMC 5

We are offering motorised butterfly valve. Electrical actuator:- brand - tmc type - electrically reversiblemodel - tmc-tppower supply - 230v 110v 24vac 50csoutput speed - 30 sec.50 secs. For 90â°input signal - change over contact pulse output milliamps volts accessories:- brand - tmc hand wheel for manual operation feed back potentiometer valve position indicator auxiliary switch reversible electrical actuator: (modulating motor) is designed for the most popular application to drive and position dampers, valves and related equipments in heating, ventilating, air-conditioning, oil or gas fired burner system, or any other industrial applications to achieve on-off, floating and proportional control action according to the demand of controller. Wide range of output torque and speed. Economical with high output torque and low power consumption. Cast aluminium construction provides light and rugged enclosure. Designed to replace other makes of actuators. Compact dimensions and easy to install. Low inertia, high torque impedance protected motor. Actuators are available to accept one of several different control signal input. Direct driven feedback potentiometer gives improved resolution. Field adjustable stroke angle with simple cam adjustment. Proven and dependable spur gear train with grease lubrication. Accessories: auxiliary switch with one or two snap acting switches. Feedback potentiometer. Class f winding insulation. Weatherproof enclosures conforms to degree of protection: ip-55 as per is - 2147. Explosion proof enclosure as per is - 2148 for gas group i, iia, iib duly certified by cmrs, dhanbad. Rotary to linear convertor unit linkage sets manual drive facilities spring return model for fail safe application remote position indicator built in signal convertor heater torque switch for overload protection.

• Material: Cast Iron
• Frequency: 50/60 Hz
• Control Type: ON-OFF
• Automation Grade: Automatic
• Valve Size: 5 inch
• Supply: 220Vac

Sap Electric Automation Valves, Sap Valves offers a complete Automated Valve assembly i.e. Actuator, Control accessories and the valve i.e. Ball Valve, Butterfly Valve, Plug Valve or dampers.

We have a wide range of Butterfly Valve which is used for several mechanical purposes in various industries. These are used to regulate the flow of fluids through a series of pipes. These valves are also applicable in larger lines as front and rear suctions and in fire apparatus.

electric valve, Mini Ball Valve, agriculture valve, Angle Check Valve

Electric Knife Gate Valve, mixing valve, Airline Valves, metering valves