Electric Motors Dealers in Goregaon, Mumbai

We are offering high torque motors.

• Width: 0.6-1 inch, 1-1.5 inch, 1.6-2 inch
• Length: 0.5-1.5 inch, 1.6-2.5 inch, 3.1-4 inch
• Thickness: 0.25-0.5 inch
• Terminal: Crimped

• Type: Automatic
• Certification: CE Certified
• Application: Air Conditioner
• Voltage: 220V
• Power Type: AC, DC
• Power Source: Electrical
• Warranty: 1 Year
• MOQ: As per Client Requirement

Marathon electric india pvt ltd. Is a widely prominent and popular name in the field of manufacturing and supplying varied range of slipping motors in india.

• Model: BM1418ZXF
• Rated Output Power: 350W
• Rated Voltage: 48V DC
• Speed after Reduction: 480 RPM
• Rated Speed: 2800 RPM
• Gear Ratio: 1:6
• Rated Torque: 7.2 N.m
• Weight: 3000 g

We deal in various types of Tefc/Spdp -sq cage ac/dc motors, flame proof motors, miniature geared synchronous motors, torque motors etc.

APPLICATION : Prabal series squirrel cage/slip ring Crane duty motors are specially designed for service on cranes and hoists. They can also be used for similar applications such as material handling equipments, and cranes of all types. These motors can serve as auxiliary motors in rolling mills or wherever intermittent duty drives are required. These are duty type rated motors developing high starting torque with low starting current. The motors are suitable for frequent starts/ stops and reversals. Also rapid acceleration is achieved by high pull out torquelrotor inertia ratio.   TYPICAL APPLICATIONS : Crane duty motors are used for following applications in majority: Cranes & hoists: long travel drive, cross travel drive, main hoist, auxiliary hoist. Material handling equipments: various conveyors Lifts Rolling mills RANGE : Manufacturing range for cast iron slip ring crane duty motors is from 112 to 400 frame. The same for squirrel cage motors in cast iron enclosure is from 80-400 & in aluminium enclosure is from 63-160. MOUNTING : Squirrel cage crane duty motors are supplied with horizontal foot- mounting. However, motors suitable for foot / flange / face mounting or any combination of these with vertical or horizontal orientation can be offered when required. Slip ring motors are normally available with foot mounting Flange mounting can be supplied on specific request.   POWER SUPPLY : Crane duty motors are suitable for 3 phase supply and can be wound for any single voltage from 220 to 650 volts and frequencies from 50 Hz or 60 Hz. The rotor voltage is committed for stator supply of 415 V, 50 HZ.For other supply conditions, Rv to be confirmed from CG. AMBIENT TEMPERATURE : The motors are rated at 45°C ambient temperature. For temperatures, other than 45°C, a deration factor has to be applied as indicated below.

• Brand Name: NAVYUG
• Power: 0.6-2.5 hp
• Insulation Class: TYPE F

• Type: Soft Starters
• Application: Industrial Use
• Application: Airport Lounges, Corporate Offices, Hospital Premises, Modern Work Spaces
• Weight: 2-4 Kg, 4-5 kG
• Condition: New, Used
• Input Voltage: 110V, 220V, 380V, 440V
• Body Material: ABS, Mild Steel, PVC
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Power Source: Electric
• Warranty: 1yr
• Benefit: Low Power Consumption

• Type: FDS DERIES
• Brand Name: FOXDOMOTICS
• Place of Origin: MUMBAI

We are foremost manufacturer, and supplier of a range of Fox Domotics Rolling Shutter Motor in Mumbai, Maharashtra, India available with following details. Specifications: - Rolling shutter motor available from 300kg to 2000kg with 1 phase and 3 phase. - Supply manual button and security lock, and can match with remote control (long distance receiver, and easy operation). - Limit switch unit enables precise adjustment of shutter in both up and down position, and safety. - In case of absence of power, a release chain can be operated door manually. - Stable operation, low noise, small vibration. Price range is between 24500 to 92000 depend upon the brand model and specification.

• Rated Power: 900 W
• Advancing Force(kg.f): 2000 Kg.f

Supply manual button and security lock, and can match with remote control (long distance receiver, and easy operation)., Limit switch unit enables precise adjustment of shutter in both up and down position, and safety., Limit switch unit enables precise adjustment of shutter in both up and down position, and safety, In case of absence of power, a release chain can be operated door manually, Stable operation, low noise, small vibration.

This series motors are of remarkable features, such as compact construction, light weight, attractive appearance, safe and reliable operation, long operation life, excellent performance and easy maintenance. For this series motors, the output ratings and mounting dimensions conform to the specifications of IEC standards.The motors are easy to complete with export machinery and equipment and to supply as spare accessories in the import equipment.This series motors are designed and manufactured into

• IS 325: Three phase Induction motors-specification
• IS : 12615:2011: Energy Efficient Induction Motors - Three Phase Squirrel Cage
• IEC 60034-30:2008: Efficiency classes of single speed, three phase, cage induction motors (IE code)
• IS/IEC 60034-1:2010: Rotating Electrical Machines: Part 1 Rating and performance
• IS/IEC 60079-0:2004: Electrical apparatus for Explosive gas atmosphere – Part 0 General Requirements
• IS/IEC : 60079-1:2007: Electrical apparatus for Explosive gas atmosphere - Equipment protection by flame proof enclosures "d"
• IEC :60079-15:2010: Electrical Apparatus for explosive gas atmosphere-- Construction, test & marking of type of protection "n" electrical apparatus.
• IS 5572:2009: Classification of hazardous areas (other than mines) having flammable gases and vapors for electrical installations.
• IS 15142:2002: Guide to the use of electrical apparatus for potentially explosive atmosphere in the presence of combustible dust.
• IS 5571:2009: Guide for selection and installation of electrical equipment for hazardous areas (other than mines)
• IEC 60072-1:1991: Dimension & output ratings of rotating electrical machines
• IEC 60072-1:1991: Dimension & output ratings of rotating electrical machines
• IS : 900:1992: Code of practice for installation and maintenance of induction motors
• IS : 1231:1974: Dimensions of foot mounted A.C induction motors
• IS : 2223:1983: Dimensions of flange mounted A.C induction motors
• Type MH: 0.37 kW 315 kW,
• Frame 71: 355L
• Type MH: 0.37 kW 315 kW,
• Frame 71: 355L

• Application: DC / AC Motors , Slip Rings Motors and Power Generators

The primary function of a Carbon Brush is to deliver or collect current from a rotating part of an electric Machine. The brushes should maintain a close contact with rotating part, (i.e. Commutator or slipring) in order to ensure sparkles operation without wearing itself too quickly. There are various types of Carbon Brushes in different types of Grades like Hard Carbon (HC), Carbon Graphite (CG), Metal Graphite (MG), Silver Graphite (SG), Electro Graphite (EG), Natural Graphite (NG), Resin Bonded (RB) and Size which are used in electrial D.C. Motors, Slip Rings Motors Power Generators, Welding Generators etc.

The LT Motors division of Crompton Greaves is the largest manufacturer of Low Tension Electric Motors in India offering a range of AC and DC Electric Motors ranging from 0.18kW to 450kW in various standard and customized configurations which meet the exacting demands of the industry. The Division has manufacturing facilities in Ahmednagar and Goa plants.

“SAIDEEP” has come out with a new range of Unbalanced Vibratory Motor from 0.09 kw to 10 kw and Centrifugal Force up to 1,00,000 N. The Vibrating Motors are manufactured in 2 poles – 4 pole and 6 pole designs. Confirming to I.S. specification. These vibro motors are being manufactured by SAIDEEP and sold all over the globe.

• Type: :
• Range: :
• Power range from 0.09 KW  Output Speed from 1.3 to 676 RPM: Sizes
• :: Available in 14 sizes
• Helical, Available in Foot / Flange mounted versions: Applications
• :: Conveyors, Agitators, Elevators, Cranes, Crusherss
• Industries: :

We manufacture carbon Brushes from world's best material. Carbon Brushes are widely used in D.C, Slipring Motors & Alternators carbon is good current collector. So they smoothly supply the current. We are particular in selecting the proper grades for proper application to avoid sparking, breakdowns & lengthen the life of carbon brushes.

• Power: 180 -1500w
• Frequency: 50hz
• Shutter Size: any size below 300sq ft
• Output Torque: 225N
• Weight Capacity: 1500kg
• Speed: 5.6 RPM

• Features: Durable oil-free pump for long life, Easy maintenance, Steel body, Faster recovery, Easy portability.

• Size (mm): Available in 22 sizes
• Usage: Conveyors, Agitators, Pumps, Mixers, Ball Mills, Cranes, Crushers
• Range: Power range from 0.35 KW to 70 KW, Output Speed from 2.5 to 361 RPM
• Industries: Chemical, Pharma, Packaging, Food Processing, Plastic, Paper etc.

• frame size: 355-630

HV three phase induction motors (frame size 355-630) & HV wound-rotor three phase induction motors (frame size 355-630) are produced combing with the design and manufacture experience of long-term and steady producing high voltage motors. These motors are adopted new technique, material and technology. With the material chosen exquisitely and the products excellent workmanship, such motors are engineered with many remarkable features such as high efficiency, energy saving, low noise, small vibration,lightweight, reliable performance, easy mounting and maintenance etc.

• Power: 1.1 KW
• Voltage: 220 V
• Mounting Type: Foot
• Frequency: 50 Hz
• Material: Cast Iron
• Horsepower: 1.5 HP
• Speed: 1440 rpm
• No. of Poles: 4
• Brand: Aditya

• Brand Name: 1
• Material: Aluminum
• Size: 10x6inch
• Type: Brass

details on contact

We are a prominent Manufacturer, Supplier and Exporter of Fan Motor Covers in Mumbai. The Fan Motor Covers are also known as De & Ode Cover. We manufacture Fan Motor Covers under highly controlled industrial environment. Fan Motor Covers, offered by us, are commonly used to install in the table fan, wall fan, etc. Our quality checkers examine the durability and efficiency of Fan Motor Covers before the final delivery. Highlights Perfect finishingQuality raw materialDurable Attractive appearance

The use of frequency inverter enables a continuous control of the motor speed and provides constant torque in the whole speed range. The rating for variable speed induction motors need to be selected based on the following aspects: Heating due to harmonic content of inverter waveform. Reduced ventilation due to low speed operation. Constant torqueConstant Power Variable torque requirement of load. Other limiting factors e.g. maximum permissible motor speed, ambient temperature, altitude etc. While variable speed drives provide highest energy saving for variable torque (Centrifugal pump, fan) applications, for constant torque and constant power application, Variable speed drives offer significant process control improvements. Basic inverters permit operation over a typical 20:1 speed range. With closed loop vector control the effective range may be increased to 1000:1.

Salient Features * ISI Marked Power Contactors * Most relaible motor protection widely accepted by Industrial and Agricultural Sector * Wide thermal overload relay range which can operate within temp. range of -5 °C to 55 °C * Degree of protection - IP42 * Elegant Look Current ratings : 15 A Thermal, 11A, AC 3 at 415 VAC

crane duty motors, Gear Motors, Pharmaceutical Equipment, Pump Set