Mountaineering Equipment Dealers in Goregaon, Mumbai

   Size: Dia 

Folding Bed are highly useful when there is a shortage of space or there are unexpected guests who need extra sleeping areas. Our folding beds come in standard size of 30” x 14” x 76 with a strong yet flexible structure. These folding beds are available  with thick mattresses filled with foam that are highly comfortable to sleep on. Folding beds are easy to store and move around as these take up less space and are not bulky. We offer folding beds to our clients at industry leading prices. Further, we ensure that these beds are immediately delivered to the clients without any delays.

Timing pulley pitch 8m14m8pgct14pgctat10at5at3t5t3t2.5 material msalnylon timing pulley with taper bush timing pulley with locking element.

It's a unique architectural blend that places you both inside and out at the same time. The structure is called a pergola, and it's just the thing to bring backyard landscaping to life. Pergolas were common features of Italian Renaissance gardens, often covering walkways or serving as grape arbors. Today, the same design can be used to define a passageway or frame a focal point in your yard. Add a climbing plant such as wisteria or, yes, grapevines, and your pergola will provide color and shade as well.   INSTALLING THE POSTS - The posts are composed of pressure-treated 4 x 4 cores that are sheathed with 1 x cedar. We secured the post cores to a concrete pad with steel post-base anchors. If you're not building on a pad, use longer posts and set them in the earth below the frost line. Lay out the post positions and mark the screw locations - We used 1/4-in. Topcon screws that thread into 3/16-in. holes bored with a hammer drill. Hold each post plumb and drive nails through the anchors into the wood. If necessary, brace the posts so they stay plumb.   ATTACHING THE SUPPORT BEAMS - Cutting the four 2 x 6 cedars support beams to length, use a template to mark the curved notches at the ends and cut the notches with a jigsaw. Clamp the beams in place, and check that they're level and that the posts are plumb. When adding the second of each pair of beams, check that they're level across the top edges.   ADDING THE CROSSBEAMS - The 2 x 6 crossbeams are notched to fit over the support beams. Cut the notches with a dado blade in the table saw, or lay out each notch and use a jigsaw to remove the waste. To install the crossbeam pairs at the posts first. When they're in place, bore screw holes down through their top edges and screw crossbeams to the support beams. Then add the three remaining pairs with similar spacing.   POST TRIM AND BRACES - Cutting the post trim pieces to length and width. Note that you'll need to notch some of the pieces to fit between the support beams, or you can make filler blocks to cover the post cores at these areas. Instead of trying for perfectly flush corners, we dimensioned the trim to leave a 1/8-in. shadow line, or reveal. Secure the trim pieces to the posts with construction adhesive and galvanized finishing nails. We use 2 x 6 stocks for the diagonal braces. Cut the ends to length at 45 degrees, and use a flexible stick to lay out the shallow curve on the lower edge of each brace. Fasten the braces to the posts and beams with screws.   FITTING THE TOP SLATS - Cutting the five 2 x 4 slats to length and shape the ends. Clamp each slat in place and mark the crossbeam notch positions.   CAPPING THE POSTS - To make the post caps, cut square blanks and then set the table saw blade to 15 degrees for shaping the bevels. Use a longer board with a stop across the end as a sled to guide each blank through the blade. Clamp the blanks to the sled when making the cuts.      

We are offering magnetic separator pulley. Pmt magnet pulley is a self-cleaning separator. It is installed as head pulley in belt conveyor for continuous & automatic removal of iron ferrous particles from product on the belt. Installed at the discharge end of the belt conveyors, magnet pulley are ideal for removal of ferrous particles that cannot be removed by either a plate magnet or suspension magnet due to the depth of conveyed product. Pulley consists of 360 degree magnetic field that retains the iron particles till the belt passes the face of the pulley. Thereafter the iron particles falls behind the divider & the cleaned material due to gravity falls ahead. magnet pulley is an integral part of conveying system and for installation there is no need of any additional setup or arrangement. The key waved shafting of pulley can directly fit into the existing drive of the belt conveyor system. It is very effective in separating tramp iron from feed & grain, coal handling, mining, waste recovery, paper & pulp industries. It is maintenance free and effective separator with high percentage of separation of iron particles. magnet pulley are available in various sizes with key waved shafting to suit the specific requirements. They are also available with "gemini rare earth powerful magnets" for greater level of iron separation

• Color: Blue
• Brand Name: REVIVA
• Shape: Pyramid
• Material: Polyester
• Application: Outdoor
• Country of Origin: Made in India

• Specialities: Robust construction, high tensile strength, consistent performance and longer functional life

Saideep” manufacture a wide range of rare earth and ferrite magnetic pulleys. These pulleys are widely used to remove tramp iron mixed with the material moving on a conveyor belt. The magnet pulleys are always installed at the discharge point of the conveyor to separate tramp iron from the product moving on the conveyor belt. Applications : the permanent magnetic pulley is dual-purpose equipment used for protection of crusher jaws or other machinery and also for purification and concentration of magnetic material from the mines. It has the widest application in food, chemical, ceramic, paper, coal handling, foundry operation and mining industry.

We are reckoned in one of the most respected and renowned manufacturers, exporters and suppliers of Timer Pulleys amongst our competitors. Available in different sizes and dimensions, our assortment is of pulleys is massively demanded across the globe to be used in material handling equipments. Durable in quality, these Timer Pulleys have various features such as less vibration, corrosion resistance and dimensional accuracy. Our assortment is tested under the quality parameters to provide qualitative range of pulleys. We produce Timer belt pulleys by using the gear hobbing or gear shaping methods. We have gear tools with the pitches : mm - inch - HTD - AT. The maximum diameter we can cut is 3000 mm.

• Pattern: Printed
• Color: Blue, Orange, Red, White
• Waterproof: Yes
• Usage: Camping Tent, Party, Advertising Tent

• Material: Mild Steel
• Power Source: Electric
• Capacity: 1-3 ton
• Voltage: 220 V
• Lift Speed: More than 8m/min
• Frequency: 50/60Hz
• Lifting Height: 20/30 Meters
• Phase: Single Phase

Fabric-Plain polyester & Mesh polyester Reflective Tape - Microprismatic Pvc Glass Bead Tc Colors Fluorescent Orange, Lime Green, Yellow, Royal Blue, Red, Black.

Traction Pulley is useful for Home & Hospital Traction treatmement in the form of Horizontal bed traction of Skin Ankle & Foot region& Vertical Traction of cervical & Lumbar region. Made of powder coated metal frame & engineering plastic pulley. Use 

• Features: Durable stitching, Skin-friendly, Tear resistance

Garden Tent, Children Swing, metal swing, Wicker Bar Set, Single Bed

We have adopted secure payment methods that are approved by authority and featured with options that facilitate quick transfers. Our company is a pioneering name in Malad West(India), renowned for providing the best product at competitive prices.

• Type: Folding Bed
• Material: Iron, Metal, Mild Steel, Natural Wood, Polyester, Stainless Steel
• Weight: 0-5kg, 10-15kg, 5-10kg
• Color: Black, Brown, Creamy, Grey, Red, Silver
• Finishing: Non Poloshed, Polished
• Dimension: 24x24x10inch, 25x25x11inch, 26x26x12inch, 27x27x13inch, 28x28x14inch
• Application: Home Use
• Style: Antique, Common
• Feature: Comfortable, Corrosion Proof, Excellent Finishing, Foldable, Light Weight

We are the main supplier of this product.

• Color: Silver
• Country of Origin: Made in India
• Usage/Application: Double Beam Crane
• Dimension: 70 mm
• Standard Lift: 3 m
• Speed Fpm: 1570.8 ft / min
• Capacity: 1 ton