Mountaineering Gear Dealers in Goregaon, Mumbai

Timing pulley pitch 8m14m8pgct14pgctat10at5at3t5t3t2.5 material msalnylon timing pulley with taper bush timing pulley with locking element.

It's a unique architectural blend that places you both inside and out at the same time. The structure is called a pergola, and it's just the thing to bring backyard landscaping to life. Pergolas were common features of Italian Renaissance gardens, often covering walkways or serving as grape arbors. Today, the same design can be used to define a passageway or frame a focal point in your yard. Add a climbing plant such as wisteria or, yes, grapevines, and your pergola will provide color and shade as well.   INSTALLING THE POSTS - The posts are composed of pressure-treated 4 x 4 cores that are sheathed with 1 x cedar. We secured the post cores to a concrete pad with steel post-base anchors. If you're not building on a pad, use longer posts and set them in the earth below the frost line. Lay out the post positions and mark the screw locations - We used 1/4-in. Topcon screws that thread into 3/16-in. holes bored with a hammer drill. Hold each post plumb and drive nails through the anchors into the wood. If necessary, brace the posts so they stay plumb.   ATTACHING THE SUPPORT BEAMS - Cutting the four 2 x 6 cedars support beams to length, use a template to mark the curved notches at the ends and cut the notches with a jigsaw. Clamp the beams in place, and check that they're level and that the posts are plumb. When adding the second of each pair of beams, check that they're level across the top edges.   ADDING THE CROSSBEAMS - The 2 x 6 crossbeams are notched to fit over the support beams. Cut the notches with a dado blade in the table saw, or lay out each notch and use a jigsaw to remove the waste. To install the crossbeam pairs at the posts first. When they're in place, bore screw holes down through their top edges and screw crossbeams to the support beams. Then add the three remaining pairs with similar spacing.   POST TRIM AND BRACES - Cutting the post trim pieces to length and width. Note that you'll need to notch some of the pieces to fit between the support beams, or you can make filler blocks to cover the post cores at these areas. Instead of trying for perfectly flush corners, we dimensioned the trim to leave a 1/8-in. shadow line, or reveal. Secure the trim pieces to the posts with construction adhesive and galvanized finishing nails. We use 2 x 6 stocks for the diagonal braces. Cut the ends to length at 45 degrees, and use a flexible stick to lay out the shallow curve on the lower edge of each brace. Fasten the braces to the posts and beams with screws.   FITTING THE TOP SLATS - Cutting the five 2 x 4 slats to length and shape the ends. Clamp each slat in place and mark the crossbeam notch positions.   CAPPING THE POSTS - To make the post caps, cut square blanks and then set the table saw blade to 15 degrees for shaping the bevels. Use a longer board with a stop across the end as a sled to guide each blank through the blade. Clamp the blanks to the sled when making the cuts.      

We are offering magnetic separator pulley. Pmt magnet pulley is a self-cleaning separator. It is installed as head pulley in belt conveyor for continuous & automatic removal of iron ferrous particles from product on the belt. Installed at the discharge end of the belt conveyors, magnet pulley are ideal for removal of ferrous particles that cannot be removed by either a plate magnet or suspension magnet due to the depth of conveyed product. Pulley consists of 360 degree magnetic field that retains the iron particles till the belt passes the face of the pulley. Thereafter the iron particles falls behind the divider & the cleaned material due to gravity falls ahead. magnet pulley is an integral part of conveying system and for installation there is no need of any additional setup or arrangement. The key waved shafting of pulley can directly fit into the existing drive of the belt conveyor system. It is very effective in separating tramp iron from feed & grain, coal handling, mining, waste recovery, paper & pulp industries. It is maintenance free and effective separator with high percentage of separation of iron particles. magnet pulley are available in various sizes with key waved shafting to suit the specific requirements. They are also available with "gemini rare earth powerful magnets" for greater level of iron separation

• Size: Available in different sizes
• Brand Name: Global corporation
• Minimum Order Quantity: 1 Piece 

  Charrmilles ROBOFIL      190 GUMMED PULLEYSize : OD 160mm x ID 15mmPart No: 130002082

We are reckoned in one of the most respected and renowned manufacturers, exporters and suppliers of Timer Pulleys amongst our competitors. Available in different sizes and dimensions, our assortment is of pulleys is massively demanded across the globe to be used in material handling equipments. Durable in quality, these Timer Pulleys have various features such as less vibration, corrosion resistance and dimensional accuracy. Our assortment is tested under the quality parameters to provide qualitative range of pulleys. We produce Timer belt pulleys by using the gear hobbing or gear shaping methods. We have gear tools with the pitches : mm - inch - HTD - AT. The maximum diameter we can cut is 3000 mm.

Fabric-Plain polyester & Mesh polyester Reflective Tape - Microprismatic Pvc Glass Bead Tc Colors Fluorescent Orange, Lime Green, Yellow, Royal Blue, Red, Black.

• Features: Durable stitching, Skin-friendly, Tear resistance

• Pattern: Printed
• Color: Blue, Orange, Red, White
• Waterproof: Yes
• Usage: Camping Tent, Party, Advertising Tent

We have adopted secure payment methods that are approved by authority and featured with options that facilitate quick transfers. Our company is a pioneering name in Malad West(India), renowned for providing the best product at competitive prices.

• Type: Folding Bed
• Material: Iron, Metal, Mild Steel, Natural Wood, Polyester, Stainless Steel
• Weight: 0-5kg, 10-15kg, 5-10kg
• Color: Black, Brown, Creamy, Grey, Red, Silver
• Finishing: Non Poloshed, Polished
• Dimension: 24x24x10inch, 25x25x11inch, 26x26x12inch, 27x27x13inch, 28x28x14inch
• Application: Home Use
• Style: Antique, Common
• Feature: Comfortable, Corrosion Proof, Excellent Finishing, Foldable, Light Weight

We are the main supplier of this product.

• Material: Mild Steel
• Power Source: Electric
• Capacity: 1-3 ton
• Voltage: 220 V
• Lift Speed: More than 8m/min
• Frequency: 50/60Hz
• Lifting Height: 20/30 Meters
• Phase: Single Phase

• Usage: Gym
• Brand Name: Aerofit
• Size: As per client requirement

We are offering conveyor pulleys. At rollwell, all pulleys are custom designed to suit customer’s specifications and precession engineered for perfect performance. Rollwell pulleys are suitable for continuous operation and designed as per relevant is and other international standards. Salient features of rollwell pulleys are; pulley shafts are made of c45 steel and ultrasonically tested. all pulleys will be stress relieved before machining. out of roundness of shaft is limited to 0.2mm. out of roundness of shell maintained to +1.5mm and face run out is limited to 1.5mm. all pulleys are statically balanced. pulleys provided with minimum 8mm thick fillet weld joint. the lagging sheets are of natural rubber and are hot vulcanized to the shell.

• Power Source: Motorized
• Type: Hydraulic Winches
• Capacity: 100 tonne
• Brand Name: Torque
• rope length: >25 m
• Material: Mild Steel
• Usage/Application: Utility
• Model Name/Number: K77

• Material: Carbon Steel
• Usage/Application: Double Beam Crane
• Product Type: Motorized
• Capacity: 0.5 Ton
• Finishing Type: Polished
• Weight: 75 Kg
• Speed: 25 Rpm
• Diameter: 75 cm

• Feature: Eco friendlyLight-weighted,precisely designed

We are a renowned Supplier of premium quality Taper Lock Pulleys. The Taper Lock Pulleys offered by us are in accordance with metric standard. Our Taper Lock Pulleys are available in over 3000 standard sizes conforming to ISO recommendations with unique Taper Lock fixing advantage and dual duty grooves to accommodate both V-Belts and Wedge Belts of SPZ, A/SPA, B/SPB, C/SPC, sections. Features Premium qualityLong working lifeUnique taper lock fixing advantageDual duty grooves Raw Material Used Cast Iron

The V Belt Pulley offered by us is widely demanded in the market due to its efficacy in respective applications. Additionally, we provide Wholesale V Belt Pulley made of high grade cast iron or press formed from deep drawn steel at the most advantageous deals. These are dynamically balanced to reduce vibration levels.

camping mats, Carpet Mats, Decorative Carpets, machine made carpet

Saideep” manufacture a wide range of rare earth and ferrite magnetic pulleys. These pulleys are widely used to remove tramp iron mixed with the material moving on a conveyor belt. The magnet pulleys are always installed at the discharge point of the conveyor to separate tramp iron from the product moving on the conveyor belt. Applications : the permanent magnetic pulley is dual-purpose equipment used for protection of crusher jaws or other machinery and also for purification and concentration of magnetic material from the mines. It has the widest application in food, chemical, ceramic, paper, coal handling, foundry operation and mining industry.

Well designed and built to ensure trouble free, efficient dyeing & washing operation. Made of Stainless-Steel to avoid corrosion. Sturdy in construction and economic in use. S.S. Tank mounted on M.S. frame to take heavy load.

• Specialities: Robust construction, high tensile strength, consistent performance and longer functional life

shaft pulley, Solid Pulley, DRIVE PULLEY

promotional tent, Children Swing, metal swing, Wicker Bar Set, Single Bed

Driving Pulley, Brake Shoe Textile Machinery Spares

Sleeping Bags, rucksack, Traveling Bags, trolly suitcase

Gears, helical, internal, Sprocket, Turned Components, Worm Wheel

Folding Portable Tent, outdoor bench, Stylish Plastic Chair