Multispan Temperature Controllers Dealers in Mumbai

• Type: Digital Temperature Controller
• Application: Industrial
• Weight: 400-800gm
• Color: Black
• Feature: Auto Controller, High Performance, Stable Performance
• Condition: New
• Display Type: Digital
• Theory: Temperature Controller
• Frequency: 50Hz

setpoint and process both are displayed simultaneously. the process display is 12.5mm height. the setpoint display is 8mm height. the power supply is 90-260 vac. notes 1. on-off control: relay is on upto the set temperature and cuts off at the set point. system temperature will come down and again relay will go on at temperature 2 °c below the set point. same function is repeated. adjustable dead band is provided for specific application. time-proportionating control : relay will be on and off in band of ±2 °c of set-point. on-off : time will adjust as per the heat requirement of the system. of course total time cycle will be of 15 seconds. 2. 4½ digit temperature indicator/controller nippon 2020a. 3. contact factory for supply volts of 90 - 260 vac & retransmission output     principle  :  input signal is signal conditioned, linearised and amplified.  it is compared with the set point and accordingly relay operates.   inputs  :  j,k,r,s,t and other thermocouples, r.t.d's like pt-50, pt-100 (2~3 wire), 0-1vdc, 4-20 ma... etc. range, indicating  : refer table - a accuracy, resolution ambient compensation: automatic  setting  : by push button - coarse/fine pots or by membrane key - trimpot setting accuracy : better than 0.2% output  : relay contacts rated at 230v/6a. control  : on-off or time-proportional (refer note on back side)  sensor open protection: built-in indicates ' 1', relay cuts-off.  ambient temperature:  0-55 °c supply :  230 vac ±10%, 50 hz standard, 90-260 vac on request. box size  :  96 (h) x 96 (w) x 180 (d) or  72 (h) x 72 (w) x 110 (d) or  48 (h) x 48 (w) x 100 (d) in mm note : 24 vdc for loop power 4-20 ma input on re

• Size: 96 x 96 mm
• Frequency: 50 Hz
• Model No.: MDC Series
• Control Type: PID/On-Off
• Input Type: Thermocouple, RTD, Current (mA), Voltage (mV)
• Control output Type: Relay/SSR, Analog (mA/mV)
• Brand: Multispan

• Type: Temperature Controller, On/ Off And PID
• Application: Industrial
• Color: Black
• Feature: Durable, Stable Performance, High Accuracy
• Voltage: 110V, 220V
• Display Type: Digital
• Theory: Temperature Controller
• Frequency: 50Hz, 60Hz
• Driven Type: Electric, 24V
• Certificate: ISI Certified
• Current Type: AC
• Country of Origin: India
• Brand Name: Premier Electrosystems

• Brand Name: PPC
• Driven Type: Electric
• Current Type: AC
• Color: Black
• Condition: New
• Power: 220V
• Application: Industrial
• Size: 72(w)* 72(h)* 110 (d) Mm (cutout- 68*68mm) 48(w)* 96(h)* 110 (d) Mm (cutout- 46*92mm) 96(w)* 96(h)* 110 (d)mm (cutout - 92*92 Mm)
• Model Number: ppc-dtc
• Feature: High Performance
• Voltage: 230
• Display Type: Digital
• Type: Digital Temperature Controller, FE-CON(J) / CR-AL (K) / PT-100 (RTD)
• Weight: .200-400gm
• Theory: Temperature Controller
• Frequency: 50Hz
• Temperature Range: 0-400C
• Resolution: 1
• Accuracy: 1
• Country of Origin: India
• RANGE: 0 -60.0/100/250/400/600/1200 degree centigrade,
• OUTPUT: TIME PROPORTIONAL / ON-OFF - RELAY- 6A/10A ( 1C/O) / SSR
• SETTING: POTENTIOMETRIC SETTING (PUSH TO SET ),
• DISPLAY: 3 ½ DIGIT, 7 SEGMENT DISPLAY,
• POWER SUPPLY: 230 VAC / 50 HZ

• Brand Name: West Control Solutions
• Model Name/Number: 6100+ & 8100+ & 4100+
• Enclosure: IP66
• Certifications: CE,UL,ULC,CSA
• Sampling Time: 4 per second,14 bit resolution approximately
• Output Type: Relay,SSd,DC linear V or mA,Triac,24V transmitter power supply
• Product Category: Single Loop Controller
• Dimensions and Size: 48mm x 48mm x 110mm (HxWxD),1/16 DIN; 96mm x 48mm x 100mm,1/8 DIN; 96mm x 96mm x 100mm,1/4 DIN
• Primary Input Type: Universal (TC,RTD,DC linear mA/mV)
• Other Inputs: Digital,Remote setpoint
• Max. Number of Outputs: 3
• Control Type: PID,ON/OFF,Manual,Alarm,Ramp to Setpoint
• Power Supply: 100-240V AC 50-60Hz,20-48V AC 50/60 Hz,22-65V DC
• Communicatons: RS-485 serial (West ASCII or MODBUS)
• Panel Sealing: IEC IP66,NEMA4X

• Color: Black/ Grey
• Usage: Industrial
• Name: PID Controller

Input: J, K, R, S, T, RTD Control Action: On Off PID Control Logic: Heat/ Cool Auto tune: Yes Power Supply: 230 V AC +/- 10%

1] Analog Temperature Controller (48 x 48) 2] Digital Temperature Controller (48 x 48, 72 x 72, 96 x 96) Digital Timer PID Temp. Controller Process Indicator Counter Programmable Logic Controllers Accessories

we manufacture and supply high grade digital temperature controller. Our digital temperature controllers are designed to measure, display and control temperature of furnaces over wide range, with high accuracy. Different digital temperature controller sensors are used for the desired temperature control range. In our digital temperature controller, uses of proportional controller minimize overshoot and undershoot of the furnace. The measured temperature is displayed on a digital led display of our digital temperature controller. features of digital temperature controller automatic cold junction compensation (thermocouples)broken sensor indication & sensor linearizationusing dfg techniques are the standard features

Digital Temperature Controller heat or cold generators (with manual and programmable automatic defrosting).Temperature display and adjustment. All purpose temperature controller. Front panel functions :- Relay ON Indicator. Defrost Indicator Alarm Indicator Timer Indicator Keypad Lock Indicator

• Power: 230V AC ± 15%, 50/60 Hz
• Size: 96 x 96 x 110mm, 48 x 96 x 150mm

Digital temperature controller, The Dimension are 96 X 96 X 150mm. Other related products manufactured are Potentiometric type controllers withwithout deviation indicator, Portable and Mains operated temperature indicators.Display : 4.5 Digit, 12.5mm Red Led. Range : 100 0C to 1700 0C in various models Resolution : 0.1 0C or 1 0C Accuracy : Better than 0.25 % ± 1 digit Sensor : Suitable for RTD (pt100), thermocouple (Type J, K, R, S, T), solid state Sensors.

• Brand Name: Autonics
• Weight: Approx. 150g
• Model No.: TK4S-B4CN
• Display: 4-digit 7-segment LED
• Control Method: ON/OFF control, P, PI, PD, PID control
• Sampling Duration: 50ms
• Control Output 1: Current(DC0/4-20mA) or SSR drive
• Option Input: CT, Digital(DI-1)
• Option Output: Alarm 1/2, RS485 comm.
• Power Supply: 100-240VAC
• Protection Structure: IP65(front panel)
• Hysteresis: RTD/Thermocouples: 1 to 100Deg.C variable Analog: 1 to 100-digit
• Proportional Band: 0.1 to 999.9Deg.C
• Integral Time: 0 to 9999 sec
• Derivative Duration: 0 to 9999 sec
• Control Period: Relay output, SSR drive output: 0.1 to 120.0 sec Current output or SSR drive output selectable: 1.0
• Manual Reset: 0.0 to 100.0%
• Ambient temperature: -10 to 50Deg.C, storage: -20 to 60Deg.C
• Ambient Humidity: 35 to 85% RH, storage: 35 to 85% RH
• Insulation Type: Double insulation or reinforced insulation

• Size: 48 x 48 mm
• Control Type: PID/On-Off
• Brand Name: Sub Zero
• Accuracy: +/- 0.5% FS
• Display Type: 4 Digit/7 Segment
• Mounting Type: Panel
• Voltage: 230 VAC
• Frequency: 50/60 Hz
• Model No.: PT244-T
• Input Type: Thermocouple, RTD
• Control output Type: Relay/SSR
• Resolution: 1 Degree C

Power 90 - 250 VAC, 47 - 63 Hz, 12VA, 5W maximum 11 - 26 VAC VDC, SELV, Limited Energy, 12VA, 5W maximum Signal Input Resolution: 18 bits Sampling Rate: 5 times second Maximum Rating: -2 VDC minimum, 12 VDC maximum( 1 minute for mA input )Temperature Effect: ±1.5 uV °C for all inputs except mA input ±3.0 uV °C for mA input Sensor Lead Resistance Effect: TC: 0.2uVohm 3-wire RTD: 2.6 °Cohm of resistance difference of two leads 2-wire RTD: 2.6 °Cohm of resistance sum of two leads Burn-out Current: 200nA Common Mode Rejection Ratio (CMRR): 120dB Normal Mode Rejection Ratio (NMRR ): 55dB Sensor Break Detection: Sensor open for TC, RTD and mV inputs, Sensor short for RTD input, below 1 mA for 4-20 mA input, below 0.25V for 1 - 5 V input, unavailable for other inputs. Sensor Break Responding Time: Within 4 seconds for TC, RTD and mV inputs 0.1 second for 4-20 mA and 1 - 5 V inputs

• Input: Thermal Couple K E J S
• Thermal Resistance:: Pt 100 Cu50

The XMT*3000 digital temperature controller can replace traditional display meter. It adopts three - positions keys to set freely and single 4 digit LED display. It has 2-on / off control , it is simple digital meter with control capability more reasonable . Range: K (0 to 1300 deg C); E (0 to 800 deg C)                               S (0 to 1600 deg C); J (0 to 1000 deg C)                                            Pt100 (-200.0 to 200.0; 0 to 600 deg C)                                Cu50(-150.0 to 150.0deg C) ·          Display: 4 digit LED display        OUT Indicator Light: When OUT is ON, a green LED light .        Set key (SET): Switches the setting mode and registers the                                     setting value and selected value .              Dec Key : Decreases numeric value of the setting value .               Inc Key : Increases numeric value of the setting value .  ·          Basic Error:  +/- 0.5 % +/- a dot of the total range of the input. ·          Control Output:  Relay contact   AC 250V    7A (impedance)  ·          Control Means: 2 - on / off control  ·          Power AC 220 V   (50/60 Hz )  ·          Work Environment: temperature 0 - 50 deg C, Humidity < 85 % RH, No corrode  ·          Size:  XMTG 48x48x90 mm   Hole 44x44  

PID Soft Start controllers are especially designed for hot runner coil heaters and tubular heaters. It is very efficient and economical. Multi zone hot runner controllers are made by individual temperature controller modules assembled in a cabinet. Soft start facility in this controller will help evaporate any moisture present inside the heater. The coil heaters have MgO content, and are therefore hygroscopic in nature. If kept unused for long periods, there is moisture deposition on the terminals. So we recommend de-moisturizing the heaters by preheating at 100° C to 120°C using controllers with soft start functions.

• Brand Name: Texas Star
• Size: 48 x 48 mm
• Temperature Range: 2 Line- 7 Segment
• Display Type: LCD
• Voltage: 100V
• Frequency: 50Hz
• Model No.: DX350 HDV
• Control Type: PID/On-Off
• Usage/Application: Electrical Fitting

PID Soft Start controllers are especially designed for hot runner coil heaters and tubular heaters. It is very efficient and economical. Multi zone hot runner controllers are made by individual temperature controller modules assembled in a cabinet. Soft start facility in this controller will help evaporate any moisture present inside the heater. The coil heaters have MgO content, and are therefore hygroscopic in nature. If kept unused for long periods, there is moisture deposition on the terminals. So we recommend de-moisturizing the heaters by preheating at 100° C to 120°C using controllers with soft start functions.   Maximum output power per zone – 3600 W Supply Voltage 230 V / 415 V – Three Phases Thermo couple input: universal type – (J) Temperature display – °C Indication of soft start, Load, T.C. open & T.C. Reverse Digital display for temperature       Customer just provide basic information about products, number of cavities and polymer ; then we will manufacture and supply entire parts of manifolds and Hot sprue bush or straight shot nozzles. Use as many bolts as needed to maintain rigidity. Keep back plate clamping bolts close to manifolds without expose to direct heat.

• Brand Name: Selec
• Size: 48 x 48 mm
• Control Type: PID/On-Off
• Type: Digital
• Display Type: 3 Digit/7 Segment
• Color: Black
• Mounting Type: Panel
• Voltage: 90-270 VAC/DC
• Frequency: 50/60 Hz
• Model No.: TC513AX
• Input Type: Thermocouple
• Control output Type: Relay/SSR
• Resolution: 1 Degree C
• Input Sensor: RTD
• Usage/Application: Heating

• Type: Temperature Controller
• Color: Grey
• Voltage: 110V, 220V
• Condition: New
• Application: Indoor, Outdoor
• Display Type: Analog
• Theory: Bimetal Thermometer
• Frequency: 50Hz
• Driven Type: Battery
• Temperature Range: 0-100°C
• Feature: Auto Controller
• Certificate: CE Certified

Temperature / Process Controller

• Frequency: 50/60 Hz
• Display Type: 4 Digit/7 Segment
• Voltage: 110- 230 V AC
• Resolution: 0.1°C.
• Accuracy: ±1°C (-50 – 70°C).
• Mounting Type: Wall
• Control Type: On-Off
• Brand: Selec
• Temperature measuring range: -50 – 99°C.
• Sensor error delay: 1 minute.
• Power supply: 220 VAC±10%, 50/60Hz
• Power consumption: ≤3 W.
• Sensor: NTC sensor (1PC).
• Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC.
• Ambient temperature: 0 – 60°C.
• Storage temperature: -30 – 75°C.
• Relative humidity: 20% – 85% (No condensate).
• Front panel size: 75(L) x 34.5(W)(mm)
• Mounting size: 71(L) x 29(W)mm.
• sensor length: 1m (include the probe).
• Product size: 75(L) x 34.5(W) x 85(D)mm.
• Package includes: 1 x 220V Mini Digital Temperature Controller. 1 x Temperature sensor probe with cable. 1 x Instruction Manual.

• Brand Name: System Controls
• Temperature Range: 0-400 Deg C for J type Thermocouple Input
• Application: Rubber & Plastic Moulding Machine
• Power: 100 to 240 VAC
• Accuracy: 1% of Full Scale
• Type: Digital
• Size: 96*96 mm
• Weight: 750 gm
• Model Name/Number: DTC-PS
• Display Size: 0.56"
• Control Action: ON/OFF or Proposnal
• Warranty: 1Year

• Brand Name: Selec
• Size: 48 x 48 mm
• Control Type: PID/On-Off
• Type: Digital
• Display Type: 3 Digit/7 Segment
• Color: Black
• Mounting Type: Panel
• Voltage: 90-270 VAC/DC
• Frequency: 50/60 Hz
• Model No.: TC513AX
• Input Type: Thermocouple
• Control output Type: Relay/SSR
• Resolution: 1 Degree C
• Input Sensor: RTD
• Usage/Application: Heating

DU’s Temperature Controllers are easy to use.Best of all, no wiring is required.Just plug in the equipment whose operation needs to be controlled, place the sensor in the area to be controlled, and program the controller. The temperature controller can be used for heating or cooling applications. The controller turns off the heater or cooler when the liquid reaches the specified temperature and maintains the desired temperature using an efficient PID algorithm. These digital temperature controllers can be provided with or without digital timers.

• Size: 96 X 96 Mm
• Temperature Range: -200 DegreeC
• Brand Name: Delta
• Input Type: Thermocouple

• Brand Name: Omron
• Size: 72 x 72 mm
• Control Type: On-Off
• Display Type: 3 Digit/7 Segment
• Mounting Type: DIN Rail
• Voltage: 24 VAC/DC
• Frequency: 50/60 Hz
• Model No.: E5CWL Series

• Brand Name: Selec
• Size: 72 x 72 mm
• Control Type: PID/On-Off
• Display Type: 4 Digit/7 Segment
• Frequency: 50Hz
• Model No.: DTC231
• Control output Type: Relay
• Resolution: Fixed 1 Degree
• Display Configuration: 3 Digits
• Type of Input: Thermocouple (J,K)
• Supply Voltage: 270V AC/DC

Radix Manufactures Temperature Controllers of all shapes, sizes and costs. Choose from Autotune PID Controllers, ON-OFF Controllers, Programmable Temperature Controllers, Digital Temperature Controllers and Blind Temperature Controllers. Most of our temperature controllers have universal input and can interface with a wide array of field instruments and signals. We have also incorporated Time-Proportional Control our controllers, a form of pulse-width modulation that makes a ON-OFF or discrete actuator mimic a continuous actuator. As useful is sensor break indication; our temperature