NexG Apparels LLP Mulund, Mumbai, Maharashtra

We manufacture fire and welding blankets of superior quality. Workers while carrying out welding operations heat treating , grinding always face safety problems. Our fire and welding blankets provide full protection to them. They are made up of asbestos free material. There are three different types:A) Fibre glass blankets B) Aluminised blankets C) High insulation welding blankets

TOG - TurnOut Gear Manufacturers, Suppliers & Exporters Features Our turnout gears are manufactured under rigorous ISO 9001 Standards.Turnout gears are also known as bunker gears or rather commonly as structural fire fighting suits. Material Composition Outer Shell: 6.0oz NOMEX III A Fabric. Moisture barrier: Aramid/Kevlar non woven laminated with PTFE membrane for maximum breathability and hydrostatic head (waterproof) performance.(EN 343 protection against foul weather) Thermal barrier: Constructed using non-woven ARAMIDE KEVLAR fibers laminated with Nomex/Viscose innermost ling fabric for maximum protection. Reflective tape: 2"width yellow-silver-yellow reflective trims installed at arm and legs, front, back and bottom on the jacket and pants to enhance high visibility of workers.

Manufacturers, Suppliers & Exporters Features Our turnout gears are manufactured under rigorous ISO 9001 Standards.Turnout gears are also known as bunker gears or rather commonly as structural fire fighting suits. Material Composition Outer Shell: 6.0oz NOMEX III A Fabric. Moisture barrier: Aramid/Kevlar non woven laminated with PTFE membrane for maximum breathability and hydrostatic head (waterproof) performance.(EN 343 protection against foul weather) Thermal barrier: Constructed using non-woven ARAMIDE KEVLAR fibers laminated with Nomex/Viscose innermost ling fabric for maximum protection. Reflective tape: 2"width yellow-silver-yellow reflective trims installed at arm and legs, front, back and bottom on the jacket and pants to enhance high visibility of workers.

Kevlar Gloves Safety gloves made from Kevlar fabric to provide superior abrasion resistance, cut resistance, and heat resistance with support for temperatures to 300°C. Protective gloves made with DuPont Kevlar brand fiber delivers the power of performance to workers exposed to a variety of cut, abrasion and high heat hazards. Gloves made with Kevlar performance technology meets the specific performance and protection requirements of a diverse group of industries. This enables workers to perform to their fullest potential safely and comfortably in some of the most demanding environments. I) Full Kevlar: These gloves are completely made of Kevlar fabric. It has a woolen lining & are stitched with Kevlar threads. II) Leather Kevlar: The palm of the glove is made up of Kevlar and the rest with leather. It has a woolen lining. TEST REPORTS: EN 388, EN 407. Aluminised Kevlar Gloves These are gloves used where the radiant temperature is as high as upto 750°CI) Aluminised Glass fiber gloves: Outer layer made up of 'GENTEX' brand Aluminised glass fibre fabric (Imported from USA) which reflects 90% heat and the second layer is made up of good quality woolen fabric. II) Aluminised Kevlar gloves: The palm of this gloves has Kevlar fabric while the rest of it is made up of GENTEX' brand Aluminised glass fibre fabric (Imported from USA) which reflects 90% heat and the second layer is made up of good quality woolen fabric. Aluminised Gloves These are gloves made up of multiple layers of fabric. Generally, outer fabric is aramid blended fabric and the other layers are moisture barrier & thermal liners. These are used by firefighters during Fire Fighting. TEST REPORTS: CE Certified, EN 659. Extreme Temperature Gloves Multiple layers glove. Made out of Specialty High Temperature resistance fabrics to deal with temperatures exceeding 800-1000°C. Composition:I) Outer layer : Outer layer of vermiculite coated texturised fiber glass fabric.II) Middle Layer : Multiple layers of blended with non-woven carbon fabric insulations.III) Inner lining : Inner lining of Kevnox brand Inherently Flame Retardant fabric capable of withstanding more than 13% moisture as per (Ref : Handbook 11:1974).

INGRESS™ Fire Entry Suit Manufacturers, Suppliers & Exporters INGRESS™ Fire Entry Suits are manufactured in compliance to meet stringent ISO 9001 standards. Fire Entry Suit is a highly insulated suit designed for entry into extreme fires where contact temperatures can reach up to 2000°F (1093°F). It is fabricated out of special high temperature fabrics for maximum protection in total flame entry. Aluminised Fire Entry Suit is designed for maximum personal fire protection. They can be worn in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The suit is highly engineered to support the most extreme conditions with multiple layers of insulation and fully insulated hood, mitts, boots, and soles.It protects against high radiant heat as high as up to 3000°F (1650°C).

These blankets are made out of specially blended non-woven fabrics which is a very effective solution to heat blocking and acts as a fantastic fire barrier material & has very high temperature resistance during welding, and has High resistance to chemicals & solvents. Can withstand temperatures up to 1500oC & in excess at times.   APPLICATION Fire Blankets are generally used by welders for covering the area used while welding and in case of emergencies for extinguishing fire. Also used in households to extinguish small kitchen fires. INDUSTRIES  Welding Household Petrochemicals Steel Foundries, Glass, Ceramics, Other Plants where there are possibilities of hazards.

FR CLOTHING AGAINST MOLTEN METAL SPLASH Manufacturers, Suppliers & Exporters The most common cause of Molten Metal Splash is when moisture or wet materials comes in contact to the metal bath.At times Molten metal's can even reach temperatures in excess of 1600°C (Approx. 3000°F) resulting to severe burn injuries as well as fatal accidents. DEFINE Pro-Metal Apparels are designed to deliver the highest performance considering the extreme temperatures and stressful environments with constant high radiant heat as well a very high probability of the molten metal splashing on the worker working in such areas. These garments are made in compliance to stringent ISO 9001 norms as well as adhere to extreme standards of EN ISO 11612 - Codes C, D & E elements, where Series ALU-ECO & ALU-ULTRA of Pro-Metal apparels even meet the highest levels of Code C, D as well as E, ie. C4, D3, E3.  

FR CLOTHING AGAINST FLASH FIRE Manufacturers, Suppliers & Exporters PRO-FLAME™ (FR Clothing Against Flash Fire) The Importance of FR for Those Exposed to Workplace Hazards FR clothing protects the wearer through the following attributes:  Self-extinguishes or resists ignition.  Does not melt onto skin.  Provides thermal insulation from heat.  Resists breaking open and exposing skin.  Reduces burn injury and increases chances of survival. FR Equals Safety DEFINE' Protective Workwear - Pro-Flame, are apparels designed to protect the wearer against flash fire.We are here to help you make the right product choices depending on the application & nature of your working environment. There is a wide range of choices when it comes to price, quality, performance, and overall value. The least-expensive garment that meets the minimum requirements of the standard may not be the best value in the long run.A combination of the right garment and the right usage for the right hazard means a protected and productive workforce. In the end, FR equals safety.

FR CLOTHING AGAINST ELECTRIC ARC FLASH Manufacturers, Suppliers & Exporters PRO-ARC™ are engineered using the most advanced technology fabrics. Depending on the level of risk, single as well as multiple layers garments are offered. Standard PRO-ARCTM Suit would consist of a jacket, trouser as well as hood. The design of these garments can be customized as per the need & requirements. PRO-ARC Clothing Range is for various levels as below FR CLOTHING AGAINST ELECTRIC ARC FLASH Manufacturers, Suppliers & Exporters These blankets are made from asbestos-free material & are substitutes to asbestos blankets. They are very good at fire resistance & insulation.

In any industry a fire fighter has to work under conditions of very high temperature especially in case of aircraft fires, chemical fires etc. We supply alluminised fire proximity suits which exactly suit all the requirements in the above circumstances. These alluminised fire suits are made up of kevelar fabric. These suits are also useful in petrochemical plants.

manufacturers, suppliers & exporters ingress™ fire entry suits are manufactured in compliance to meet stringent iso 9001 standards. fire entry suit is a highly insulated suit designed for entry into extreme fires where contact temperatures can reach up to 2000°f (1093°f). It is fabricated out of special high temperature fabrics for maximum protection in total flame entry. aluminised fire entry suit is designed for maximum personal fire protection. They can be worn in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The suit is highly engineered to support the most extreme conditions with multiple layers of insulation and fully insulated hood, mitts, boots, and soles.it protects against high radiant heat as high as up to 3000°f (1650°c).

I) Fiberglass Blankets: These blankets are made out of asbestos-free fiberglass fabric.They come in different thickness depending on the nature of work.a) 0.4mm Approx. – Mostly used as Fire blanketsb) 0.8mm Approx. – Mostly used for Welding purposes(Can withstand temperature up to 1000°C)

CUT RESISTANCE CLOTHING Manufacturers, Suppliers & Exporters PRO-CUT™ Apparels are manufactured using the most advanced fabrics for workers working in high mechanical risk areas to protect without compromising on comfort and appearance. PRO-CUT™ Apparels provides outstanding protection against hazards posed by sharp objects and revolving or reciprocating blades. These fabrics are tested and achieve the following levels of protection when tested in accordance to ANSI/ISEA 105-2011  Level 4 Cut Protection.  Level 5 Puncture Resistance.

ALUMINISED FIRE PROXIMITY SUIT Manufacturers, Suppliers & Exporters Alugen® Aluminised Fire Proximity Suits are manufactured in compliance to meet stringent ISO 9001 standards. The fabric used to produce Alugen® suits are from GENTEX's proprietary Dual Mirror® / Flexir®Aluminized Fabrics, Imported from USA, which reflects 95% of heat and ensures superior protection and performance in the extreme work environments faced by civilians, emergency service, homeland defense and military personnel. Alugen® Aluminised Fire Proximity Suits offer an efficient solution to working in high-temperatures with superior durability.The most critical part about the Aluminised Fire Proximity Suit is the intactness of Aluminium on the outer layer of the suit as it reflects 95% heat, thereby allowing the wearer to remain much longer in proximity to heat & fire. The durability of Aluminisation on fabric can be confirmed by conducting a test named “Wet Flex” test. The procedure goes as follows,  The fabric is dipped in 60°C hot water for 15 mins and then 1000 machine abrasion cycles are conducted. There should be no delamination, or peeling off on any part of the fabric. All 'Alugen' Suits are made from fabrics which pass Wet Flex test. Most of the fabrics available in market do not pass this critical test. As a user one should be careful about this. GENTEX's proprietary Dual Mirror® / Flexir® Aluminized Fabrics offers an exceptionally high level of abrasion resistance - the result of its unique, five-layer fabric structure. This proven system ensures that the suit remains highly reflective even after repeated use and proper care and cleaning.   The five layers consist of an outer skin of 1. Aluminum, 2. Protective film, 3. Second layer of Aluminum, 4. Heat-stable adhesive and 5. Base fabric. These individual layers are then combined to form a single fabric. The five layers consist of an outer skin of aluminum, a protective film, a second layer of aluminum, heat-stable adhesive and a base fabric. These individual layers are then combined to form a single fabric (As below).  

Aluminised Blankets: These blankets are made out of Aluminised glass fiberglass fabrics used to work against high radiant temperatures. It is made of Imported Dual mirror 'GENTEX® Brand Aluminised Glass fibre fabric which is approved by Centre For Environment and Explosive Safety (CFEES) – Ministry of Defense – Govt. of India – New Delhi formerly known as DIFR, with eyelets on four corners. Temperature withstanding radiant upto 1500°C.