Nicholas Gypsum India LLP Parel, Mumbai, Maharashtra

NichoBond is a ready to use bonding agent which can be applied over smooth surface as a bonding agent. It is widely used as a base coat, before application of gypsum on smooth surfaces like RCC or precast, etc. It contains aggregates, which helps in the bonding process Features   NichoBond is a ready to use solution to be applied in single coat. No haking required on RCC surface. It can be applied with roller as well as brush. No pre-preparation of surface is required. It can be put to multiple use like fixing tiles on walls or sealing the crack, etc. Drying time is 24hrs, but the product to be applied above can be applied any time before two weeks. No dilution required. Per kg of NichoBond covers approximately 100sft of the surface, however the actual covering depends on the quality of surface & method of application.     Make sure, the surface where NichoBond is to be applied, should be free from foreign materials & dampness. Thoroughly stir the material before use. Though the company does not recommend any dilution & apply the solution directly in single cost, one can add maximum of up to 5% water for workability purpose only if needed. While applying take utmost care of aggregates being evenly distributed on the surface. The application to be done vertically and horizontally, simultaneously to get the desired spread of evenly distributed aggregates. Precautions Never apply NichoBond on wet surface or the area which is prone to leakage Store the material in cool and dry place Company strictly does not recommend to dilute the material Keep it out of reach of children

"calcium sulphate dehydrates," gypsum contains calcium, sulphur bound to oxygen, and water. It is a natural resource which is mined & processed all over the world but Nicholas Gypsum Is supplying the finest quality of all which has very good insulation properties both thermal and acoustic. Products of Nicholas Gypsum have properties like fire protection, moisture resistance, impact resistance and vapour control It can be used in various industries & segments one of which is construction industry. It can be applied in form of plaster or board on walls & ceilings as a replacement of conventional sand cement plaster above RCC or Bricks or Blocks. Gypsum provides a smooth interior finish for ceilings and walls, and is ideal background for good quality paints and wall paper finishes. Features   Excellent Balance of properties Apt setting time Good whiteness,good strength,very smooth finish No shrinkage cracks Single coat application Compatible to all kind of putty & paints Substrate suitability - Plaster, concrete, brick work, block work, etc Finest of the quality Sincere after sales &training assistance No need to add retarder for setting time     Always add powder to water & not other way round Pot life of the product is 15mins, hence mix only as much material which can be consumed in 15mins Do not alter contents of material which has already begun to set Never keep bags open - Even while working, fold mouth of bag after removing required material, as gypsum being a hegroscopic material it attracts moisture Setting time of the product is an inherent quality of the product & independent of the amount of water added. For longer setting time retarder may be used