Nitrogen Gas Plant Dealers in Mumbai

This process may be performed either before or after splitting. In the presence of a catalyst, a reaction is conducted between the ethylenic double bond of an unsaturated fat and hydrogen. A typical Hydrogenation Process is conducted at temperatures ranging from 180 degrees to 250 degrees Celsius. The ideal pressure is between 10 to 25 bars in the presence of a catalyst supported on silica gel. The hydrogenation process comprises of an exothermic reaction and the heat is used for pre heating the fat. The resulting fat which is hydrogenated is filtered followed by post refining by filtering through activated bleaching earths to remove any trace of nickel.

Hydrogenation Vanaspati Plant   Hydrogenation Vanaspati Plants are extension of hydrogenation plant. They are producing hydrogenated vegetable oils suitable for edible purpose in the form similar to balter / margarine / Vanaspati – a product similar to margarine, is very commonly used in Indian sub-continent as a cooking medium. Sundex offer wide range of Vanaspati plants.Hydrogenation PlantsSUNDEX offers its clients a wide range of Hydrogenation Plants that is used to extract oil. The oils and fats are a group of organic compounds called 'Fatty Acids' and form a vital part of daily food, which is used as a raw material for making soap. These fatty acids are made up of union of several carbon atoms in a straight chain with hydrogen and oxygen atoms. Further, a single chain comprises 6 to 24 carbon atoms, wherein 12,14,16,18 and 20 carbon chains are common. When the fatty acid reaches saturation point and the combination of carbon atoms with hydrogen is incomplete there is a possibility of further addition of hydrogen. More the un-saturation lower is the melting point of fatty acid as such, many oils containing un-saturation remains as liquids at normal temperatures. Besides, the ones that contain low amount of un-saturated acids become solid or semi solid fats at normal temperatures.Apart from this, the liquid oil can be converted to a required degree of hardness by reducing its un-saturation with the controlled reaction with hydrogen. Thus, vanaspati is such a product obtained by controlled hydrogenation of edible liquid oils (called 'soft oils' in the industry, this ensures that its hardness, consistency and grainy appearance resemble natural ghee. The addition of hydrogen in oil occurs when the hydrogen gas is brought in contact with the oil at a higher temperature in the presence of metallic nickel catalyst prepared under controlled conditions. Therefore, the process is not simple, it involves several steps, which can be performed with the help of these Hydrogenation Plants.HydrogenationThe extensive range of Hydrogenation offered by us is developed in tandem with the set industry standards. These are used for increasing of the melting point of unsaturated oils, fats and fatty acids. The Hydrogenation reaction is carried out under hydrogen gas pressure in presence of nickel catalyst, high temperature and nil moisture conditions. These hardened fats are then used generally in combination for the formulation and processing of vegetable ghee (vanaspati), margarine, shortening, confectionery and other cooking fats.Specifications:Dimension(L*W*H): 2000x1400 mmPower(W): 22 kwVoltage: 380V/50Hz

• Type: Nitrogen Gas Generator
• Weight: 5000-6000kg
• Color: Blue
• Voltage: 440V
• Condition: New
• Capacity: 1 -1000NM/hr
• Automatic Grade: Fully Automatic
• Power: 1 - 300kw
• Driven Type: Electric
• Warranty: 1year
• Country of Origin: India
• Brand Name: United
• Application: industrial
• After-Sales Service Provided: yes

We have in store an exclusive range of Zero Air Generators. These generators use the existing compresses air supply and produce a continuous flow of ultra pure zero grade air. Our generators are a self contained, simple and light weight system designed in order to replace gas cylinders as a source of calibration standards. Furthermore, compared to high pressure gas cylinders, these prove to be much easier to install. The generators can be used with stationary analyzers with the help of constant compresses air supply and electrical outlet. This makes these highly suitable for mobile testing facilities and remote monitoring sites. 

Nitrous oxide gas is manufactured by decomposing Ammonium Nitrate in Aluminium pots which are heated electrically, Gas can also be used to heat the pots and the user has to specify the mode of heating suitable to them.

In the processing of the flame, the hydrogen produced by the generators replaces acetylene, propane, hydrogen and oxygen cylinders. Thanks to high quality and purity of the gases produced by the generators, the end user can avoid the use of cylinders. The generators are used in the following applications:   Balance-brazing Cut Gold and silver optical instruments Glass processing food industry electronics Industry   OPERATION Once started, the generator provides a continuous flow of nitrogen with a purity required by the customer continuously monitored by an analyzer of the residual oxygen with adjustable alarm threshold. The production of nitrogen in the gaseous state through the separation of air is a very simple and self-healing process, based on the separation characteristics of the molecular sieve CMS (Carbon Molecular Sieve), which absorbs the oxygen molecules present in the air and passes those of nitrogen. FEATURES The nitrogen generator is composed, depending on the model, from a minimum of two containers (A and B), filled with molecular sieve CMS, which operate in an alternating manner. While the container A through the compressed air produces nitrogen, the molecular sieve of the container B is regenerated and depressurized to ambient pressure. This cycle has a duration of about 60 seconds and then is the container B to produce nitrogen while the molecular sieve of the container A regenerates itself: this air separation technique is called PSA (Pressure Swing Adsorption). The combination of all these characteristics, together with the control instrumentation, allows to offer an optimal solution to completely satisfy any type of requirement obtaining, in addition to the low cost of the nitrogen production, high degree of safety due to the absence of high containers pressure and a considerable flexibility of use.

Nitrous Oxide is produced by heating Ammonium Nitrate to a temperature of 2500C. Ammonium Nitrate is decomposed in the process to give a mixture of Nitrous Oxide & super heated steam. At the same time impurities are produced including Ammonium Nitrate fumes, Nitrogen & other oxides of Nitrogen. The steam & impurities are removed by scrubbing with water, caustic soda and sulphuric acid in sequence Nitrogen present in traces is removed by bleeding from the top of storage vessels where Nitrous Oxide is stored, after compression by a compressor

MIDIGAS nitrogen gas generators from Parker domnick hunter produce nitrogen gas from compressed air and offer a cost-effective, reliable and safe alternative to traditional nitrogen gas supplies such as cylinder or liquid. Nitrogen is used as a clean, dry, inert gas primarily for removing oxygen from products and/or processes. MIDIGAS provides an on-demand, continuous source of nitrogen gas which can be used in a wide range of industries such as food, beverage, Pharmaceutical Laboratory, chemical, heat treatment, electronics, transportation, oil and gas and laser cutting.

• Flow Rate: 1-1000 Nm³ / hr

Nitrogen PlantGenerator operating on PSA technology, consists of twin tower system filled with special grade of imported carbon molecular sieves (C.M.S.) at a time, one tower keeps in production cycle and other in regeneration cycle. When compressed air passed through C.M.S. bed, the molecules of oxygen, moisture & other unwanted gases are adsorbed on surface of C.M.S. And the nitrogen which is not adsorbed by C.M.S comes out of adsorption tower and is collected in a surge vessel. Two adsorption towers are provided which are interconnected with auto change over valves controlled by a sequence programmer(PLC). When one tower saturates with oxygen the process automatically changes over to another tower.This ensures the continuous production of the Nitrogen gas.

We offer nitrogen plants of high quality, better performance and durability. The product is widely used to produce, compress, store nitrogen for various purposes. Using PSA process. The plants are widely used in various industries, which includes following: Chemical Industry Wire Drawing and galvanizing units. Food Industry for packaging of wafers, biscuits etc.

Nitrous Oxide is produced by heating Ammonium Nitrate to a temperature of 250 Deg.c. Ammonium Nitrate is decomposed in the process to give a mixture of Nitrous Oxide & super heated steam. At the same time impurities are produced including Ammonium Nitrate fumes, Nitrogen & other oxides of Nitrogen. The steam & impurities are removed by scrubbing with water, caustic soda and sulphuric acid in sequence Nitrogen present in traces is removed by bleeding from the top of storage vessels where Nitrous Oxide is stored, after compression by a compressor.  Introduction Safe and economical, the Nitrous Oxide plant from SANGHI ORGANIZATION is a plant with an efficient Generation system which reduces power consumption and adds on to safety. A storage battery assembly for separation of Nitrogen is another safety feature with the SANGHI ORG plant. The gas manufactured conforms to Indian Pharmacopia, US & European standards and is stored in liquid state which can be directly filled into cylinders. It is produced by heating Ammonium Nitrate to a temperature of approximately 250 C. Heating could be either electrically or by gas. It is then purified in a series of towers before collecting in a gas holder. Gas is then Compressed by a water lubricated compressor, dried and liquefied. Liquid Nitrous oxide is stored in storage vessels where Nitrogen , if present, is removed. Pure liquid Nitrogen oxide is then filled into cylinders by weight. Uses Nitrous oxide gas is mainly used for anesthetic purposes. It is administered with oxygen. It is also used as carrier gas in laboratory Instruments. It also finds application, as a propellant in aerosols and food stuff. Properties of NITROUS OXIDE Nitrous Oxide is a chemical compound of Nitogen and Oxygen. Its Chemical symbol is N20. It is colourless, non flammable and nontoxic gas with a slightly sweetish taste & odour. The most common way of distributing Nitrous oxide is as a compressed liquid in Cylinders of the same kind, as used for oxygen, Nitrogen etc. The pressure in Nitrous oxide cylinders is approximately 50 Bars at 20oC It is stable and comparatively un-reactive chemical compound at ordinary temperatures. At elevated temperatures, however, the gas decomposes to Nitrogen & Oxygen. It supports combustion and hence organic substances particularly oil and greases which are petrochemical in nature must be kept away from the gas.

• Quantity: 80 cu.m./Hr

Safe and economical, the SANGHI Oxygen Plant, with an efficient expansion engine, lowers operating pressures to a remarkable 30 kgcm2 , cuts power consumption and adds to safety. Sanghi Plants are supplied with very efficient reciprocating four-stage air compressor, which consumes low power. Sanghi Plants are supplied with a specially designed highly efficient cascade cooler, which eliminates the need for chilling unit and saves on recurring maintenance and power cost. A Molecular sieve Battery drier unit for separation of moisture and carbon dioxide is another money saving device in the SANGHI plant. It removes acetylene and other hydrocarbons from the process air, thus eliminating the need for separate acetylene absorbers, and moreover it eliminates recurring caustic soda costs.

• Dimensions: 798 x 840 x 2022 mm (W x D x H)
• Weight: 270 kg
• Nitrogen outlet pressure: 6 bar(g)/87 psi(g)
• Ambient air temperature: 20 deg C/68 deg F
• Pressure dewpoint inlet air: 3 deg C/37 deg F

The SANGHI-ORG Oxygen Plant, is safe and economical to operate. It comes with an efficient expansion engine, which lowers the operating pressures remarkably to as low as 32-35 kg/cm2 and also cuts down power consumption. A Molecular sieve Battery drier unit for separation of moisture and carbon dioxide is another money-saving device in the SANGHI-ORG plant. It removes acetylene and other hydro-carbons from the process air, thus eliminating the need for separate acetylene absorbers, and moreover it eliminates recurring caustic soda costs. The SANGHI-ORG Oxygen Plant is capable of simultaneously producing high purity Oxygen Gas andNitrogen Gas. It also has an internal compression Liquid Oxygen Pump to fill dry gaseous oxygen in cylinders. We also undertake supervision of Installation and Commissioning of the SANGHI-ORG Oxygen Plant. Description of SANGHI-ORG Oxygen Plant The free atmospheric air is sucked in by a multi-stage air compressor through a filter and compressed to the working pressure. After each stage, intermediate coolers and water separators are provided. The compressed air then passes through the (evaporation) pre-cooler and then to the molecular sieve battery where the moisture and carbon dioxide are removed from the process air. It then passes through the exchanger No. 1 where it is cooled by the out-going waste nitrogen and product oxygen. A part of this cold air then flows through an expansion machine and the balance through the 2nd heat exchanger. The ratio of the two air streams is controlled by an expansion valve, RI. Both these streams of air then unite in the lower pressure column where it partially liquefies.   The liquid air (rich air) then passes through the expansion valve R2 to the upper column which is at a lower pressure than the lower column. Similarly the liquid nitrogen (poor liquid) travels from the lower column to the upper column through an expansion valve R3 where the separation of oxygen and nitrogen occurs. Nitrogen being more volatile passes out as a gas from the top of the column and this waste nitrogen flows through both the heat exchangers cooling the in-coming air. Similarly product oxygen is also passed through the two heat exchangers to cool the in-coming air and then to the filling manifold via a liquid pump. If a small amount of air is vented out from the upper column, higher purity nitrogen can also be obtained from this plant. R4 Valve is provided in order to fasten cooling during start-up.

Nitrogen Generator (SNG II)   SNG II High pressure booster, multi-stage, air cooled, pressure lubricated, continuous-duty rated High durability membrane air separators Automatic condensate drain with collector (includes switch for high condensate level) UL® labeled Control Center with PLC controller. Master central system includes interactive touchscreen interface for operation, maintenance and troubleshooting On-line percent oxygen monitor Pressure sensors for oil and final product pressure Emergency stop push button Visible alarm annunciation Sound attenuated enclosures for compressors and membrane module

We are based in Mumbai(India) and we have carved a niche for ourselves in the market by offering quality products. Buyers can contact us all year round for purchasing reliable Nitrous Oxide at market leading prices.

• Purity of Gas :: UHP / GC Grade
• Capacity of Gas :: 300 ml/Min at 6 kg/cm & 800 ml/Min at 6 kg/cm
• Method of Purification :: Pressure Swing Adsorption (PSA)
• Room Temperature :: 5 - 30Ã��Ã�ºC
• Supply :: 230VAC Ã��Ã�± 10%,50Hz

One of the most popular applications of PSA Technology is in the operation of Nitrogen Generators. This Process is based on the selective adsorption phenomena of gas molecules which is Carbon based Molecular Sieve (C. M. S.) In Pressure Swing Adsorption system as soon as compressed air is entered through an adsorption tower filled with Carbon Molecular Sieve, the molecules of gases like oxygen, moisture & other undesired gases are adsorbed on surface of the adsorbent. While Nitrogen that is not adsorbed passes out of adsorption tower. It is then collected in a surge vessel. For continuous flow of Nitrogen two adsorption towers are installed. They are inter connected with Auto change over valves. These Auto change over valves are controlled by Timer Circuit, as the saturation of one tower with oxygen gets completed, in built mechanism makes the process automatically switch to another tower and thus the nitrogen production remains continuous. Nitrogen has a wide range of industrial application. Different Capacity of Laboratory Based Nitrogen Gas Generator are available Tecnical Specifications Moisture Content < 2 ppm Oxygen < 5 ppm Total Hydro Carbon < 0.3 ppm CO & CO2 < 2 ppm   Salient Features   Nitrogen Generator for low investment Low Electric power consumption. Calibrated needle valve to adjust purge flow. No moving parts. Hence negligible maintenance. Easily installed - just make the air connection Plug in the electrical power cord. Skid mounted unit need no pounds. Pressure capacity : from 4.0 - 7.0 Kg/cm2

DESCRIPTION OF PROCESS Nitrous Oxide ( N2O ) is manufactured by thermal decomposition of Ammonium Nitrate.NH4NO3  ---------------------------> N2O   2H2O                                                                                  ( Nitrous Oxide ) ( Water )Ammonium Nitrate is melted and decomposed by reaching to a temperature of approximate 2500C to 2600 C to give a mixture of Nitrous Oxide and super heated steam as per above reaction. At the same time impurities are produced including  Ammonium Nitrate fumes, Nitrogen and Oxide of Nitrogen.  The Steam and impurities are removed by scrubbing in turn with water, caustic soda and finally acid scrubber. From the decomposition pot the hot gas including impurities enters the primary scrubber.  The scrubber is fitted with a small condensing  coil mounted at its top to condense water from part to the effluent gas stream and this water provides a counter-current flow for recovery of ammonium nitrate fumes from the gas.  N2O gas leaving the primary scrubber passes to a stain steel water scrubber for the removal of ammonium nitrate fumes. Finally, the gas passes through a mild steel caustic soda scrubber followed by a fiber glass / stain steel acid scrubber.  The circulation of caustic and water to the respective scrubber is maintained by me of pumps.  The scrubber gas is then allowed to collect in a rubber gasholder ( balloon ).  The gas from the gasholder is sucked by a multi stage water lubricated compressor, which compresses the gas to approx. pressure of  65 kgs/cm2 depending on ambient temperature. The compressed gas passes through a gravity type water separator before being dried in Alumina Drier Battery. Finally Nitrous Oxide in liquid form is collected in a bank of three storage vessels.  The storage vessels are kept cool by spraying chilled water on them. During storage the impure nitrogen gas is being removed by venting out the gas after cooling down the storage vessels.  The pure liquid nitrous oxide is then filled into cinders by weight.  For this, the cinders are to be filled by keeping them on a weighing scale.  Nitrous Oxide is liquefiable gas and is stored in cinders in liquid form only. Available capacities : 8M3, 16M3 ,24M3

Reckoned for our excellent customer care support, we have become preeminent suppliers of Nitrous Oxide Gas Plants in the industry. From cash payment to bank transfer, we are comfortable with any of these payment options. As per your convenience, you can make the payment for your order.

• Voltage: 230 VAC, 50 Hz, 1 ph
• Automation Grade: Automatic
• Brand/Make: AONE
• Gas Type: ZERO AIR
• Method Of Purification: Pressure Swing Adsorption (PSA)
• Model Name/Number: AZAG03 (for TOC Analyser) AZAG03 - TOC (0) (for Online TOC Analyser)
• Purity: UHP grade / TOC/XL grade / Online TOC grade
• Moisture: < 5 ppm

We are offering nitrogen gas generator. I-chess is a company established in 2006, headquartered in mumbai, india and led by a german national. Our knowledge is based on two decades of hands-on experience in various fields of the international and indian chemical industry. Through its various offices and global network, i-chess is very familiar with the needs and requirements of american, european and asian companies. We take pride to add to our existing services and now offer our customers tailor-made and intelligent solutions in the field of nitrogen generating plants with respect to increasing value and reducing costs. we believe i-chess is well placed to capitalize on the global industry’s move away from traditional markets towards asia and especially india. Thanks to our core strengths in innovative research & development and cost effective production, we are convinced to add value to your business. i-chess is a manufacturer of higher value added chemical intermediates that find application in various fields, right from api’s to agrochemicals, polymers, anti-oxidants, food-additives and performance chemicals. our experience, efficiency & expertise in understanding technologies and bringing them to live is also due to the fact that we do not mind being pioneers in certain fields. We started from scratch to achieve the recognition of many client and are still hungry. Our products can provide you with solid, reliable economic alternatives just as it has opened new avenues for others.

• Vehicle applicable: Two, Four & Heavy Vehicle
• Nitrogen Purity: 95 - 99.5 %
• Nitrogen Capacity: 70 L
• Input pressure: 8 - 10 bar
• Output N2 pressure: 4 - 6 bar
• Nitrogen Producing speed: 66 L/Min

High - octane BF-200# carbon molecular sieve adopted & core acc. Imported.Silicon oil pressure gauge with shockproof function adopted. For compatible medium, the compressed air is filtered twice. Primary Filtration : Three class precision filter of high quality adopted, Secondary Filtration : Active carbon filtration device of high quality & Capacity. By present pressure, automatic vacuuming, inflating & testing. Easy to read & handle, encapsulation technique is adopted. Pressure sensor of high precision made by US Novasensor Human based design, Easy & simple to handle. TECHNICAL SPECIFICATION:-

• PRINCIPLE SPECIFICATIONS: N2 SPECIFICATIONS OF NAG-01/NAG-01A
• Moisture: < 2 ppm
• Oxygen: < 5 ppm
• Total Hydro Carbon (THC): < 0.3 ppm
• CO & CO2: < 2 ppm
• Purity: UHP / GC grade
• Micron particulates: < 0.01µ
• Capacity of NG-02/02M: 500ml/min to 10 LPM at 5kg/cm²
• Method of Purification: Pressure Swing Adsorption (PSA) & Depressurisation
• Room Temperature: 5 ºC - 25 °C
• Start up time: 2 hr / programmable by timer
• Electrical requirements for NAG-01 & NAG-01A: 230 V AC, 50 Hz, 1 ph, 5 Amp

• Features: Produce ultra-high purity zero air, LED indication light provides operational status at a glance, Silent operation and minimal operator attention required.
• Type: Parker Balston Zero Air Generators

Nitrogen Generator & Zero Air Gas Generator For GC & TOC, ICP, AAS: Nitrogen Generator for LC-MS LC-MS-MS & Turbo vap Evaporator Zero Air Gas Generator for GC & TOC Analyzer Salient Features : • Deliver consent pressure & flow • Fully Automatic Programmable system • Easy Maintanance and space saving • Effortless and easy operation • Improves instrument performance • Fully regenerative, durability with PSA (pressure swing absorption) technology

• Type: Nitrogen Generators
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg, 5000-6000kg, 6000-7000kg, 7000-8000kg
• Color: Black, Blue, Brown, Grey
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years

• Type: Nitrogen Generators
• Application: Home, Hotel, Mall, Office
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg, 5000-6000kg, 6000-7000kg, 7000-8000kg, 8000-9000kg, 9000-10000kg)
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Capacity: 1000-1500nm/hr, 1500-2000nm/hr, 2500-3000nm/hr, 3000-3500nm/hr, 500-1000nm/hr
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years