Nitrogen Plants Dealers in Mumbai

Nitrous oxide gas is manufactured by decomposing Ammonium Nitrate in Aluminium pots which are heated electrically, Gas can also be used to heat the pots and the user has to specify the mode of heating suitable to them.

The SANGHI-ORG Nitrogen Plant, is safe and economical to operate. It comes with an efficient expansion engine, which lowers the operating pressures remarkably to as low as 32-35 kg/cm2 and also cuts down power consumption. A Molecular sieve Battery drier unit for separation of moisture and carbon dioxide is another money-saving device in the SANGHI-ORG plant. It removes acetylene and other hydro-carbons from the process air, thus eliminating the need for separate acetylene absorbers, and moreover it eliminates recurring caustic soda costs. The SANGHI-ORG Nitrogen Plant is capable of simultaneously producing high purity nitrogen Gas. It also has internal compression Liquid nitrogen Pump to fill dry gaseous oxygen in cylinders.We also undertake supervision of Installation and Commissioning of the SANGHI-ORG Nitrogen Plant. About 100 CU.M./Hr of Nitrogen will be used for regeneration of driers for SANGHI-ORG 80. * About 150 CU.M./Hr of Nitrogen will be used for regeneration of driers for SANGHI-ORG 100.* About 300 CU.M./Hr of Nitrogen will be used for regeneration of driers for SANGHI-ORG 200.The above product capacities are based on ambient conditions of 15oC temperature 760mm of Hg pressure and 50% relative humidity and 0.03% of Carbon Di-oxide is allowed as impurity. Note:1) High purity Nitrogen of upto 2 PPM can also be tapped simultaneously with a separate liquid Nitrogen pump in modified plants , at an additional cost.2) Provisions can also be made for tapping upto 25% liquid oxygen / liquid nitrogen simultaneously with gaseous oxygen, at an additional cost.Note :1) Electric motors can be supplied to suit specific power ratings in respective countries across the globe, if informed in advance.2) Specifications of other capacity plants upto 750 Cu.m/hr capacity can be furnished on request. Plant Specifications1. Production Capacity - The plant is very versatile and can be set for a cycle to produce any one of the following alternatives:-

The SANGHI-ORG Oxygen Plant, is safe and economical to operate. It comes with an efficient expansion engine, which lowers the operating pressures remarkably to as low as 32-35 kg/cm2 and also cuts down power consumption. A Molecular sieve Battery drier unit for separation of moisture and carbon dioxide is another money-saving device in the SANGHI-ORG plant. It removes acetylene and other hydro-carbons from the process air, thus eliminating the need for separate acetylene absorbers, and moreover it eliminates recurring caustic soda costs. The SANGHI-ORG Oxygen Plant is capable of simultaneously producing high purity Oxygen Gas andNitrogen Gas. It also has an internal compression Liquid Oxygen Pump to fill dry gaseous oxygen in cylinders. We also undertake supervision of Installation and Commissioning of the SANGHI-ORG Oxygen Plant. Description of SANGHI-ORG Oxygen Plant The free atmospheric air is sucked in by a multi-stage air compressor through a filter and compressed to the working pressure. After each stage, intermediate coolers and water separators are provided. The compressed air then passes through the (evaporation) pre-cooler and then to the molecular sieve battery where the moisture and carbon dioxide are removed from the process air. It then passes through the exchanger No. 1 where it is cooled by the out-going waste nitrogen and product oxygen. A part of this cold air then flows through an expansion machine and the balance through the 2nd heat exchanger. The ratio of the two air streams is controlled by an expansion valve, RI. Both these streams of air then unite in the lower pressure column where it partially liquefies.   The liquid air (rich air) then passes through the expansion valve R2 to the upper column which is at a lower pressure than the lower column. Similarly the liquid nitrogen (poor liquid) travels from the lower column to the upper column through an expansion valve R3 where the separation of oxygen and nitrogen occurs. Nitrogen being more volatile passes out as a gas from the top of the column and this waste nitrogen flows through both the heat exchangers cooling the in-coming air. Similarly product oxygen is also passed through the two heat exchangers to cool the in-coming air and then to the filling manifold via a liquid pump. If a small amount of air is vented out from the upper column, higher purity nitrogen can also be obtained from this plant. R4 Valve is provided in order to fasten cooling during start-up.

• Quantity: 80 cu.m./Hr

Safe and economical, the SANGHI Oxygen Plant, with an efficient expansion engine, lowers operating pressures to a remarkable 30 kgcm2 , cuts power consumption and adds to safety. Sanghi Plants are supplied with very efficient reciprocating four-stage air compressor, which consumes low power. Sanghi Plants are supplied with a specially designed highly efficient cascade cooler, which eliminates the need for chilling unit and saves on recurring maintenance and power cost. A Molecular sieve Battery drier unit for separation of moisture and carbon dioxide is another money saving device in the SANGHI plant. It removes acetylene and other hydrocarbons from the process air, thus eliminating the need for separate acetylene absorbers, and moreover it eliminates recurring caustic soda costs.

We offer nitrogen plants of high quality, better performance and durability. The product is widely used to produce, compress, store nitrogen for various purposes. Using PSA process. The plants are widely used in various industries, which includes following: Chemical Industry Wire Drawing and galvanizing units. Food Industry for packaging of wafers, biscuits etc.

We are offering nitrogen gas plant. F our plants incorporate design features, which enable them to produce high quality nitrogen gas simultaneously with oxygen gas production. This results in higher economical viability. F our plants are equipped with a highly efficient expansion engine, which helps rapid and adequate cooling. On account of this our plant operation is exceedingly stable with a consistency in gas purity. F high standard of purity of gases. F low power consumption, as our plant design is of low-pressure cycle. F foolproof temperature indication system-electronic scanner. F international class pressure differential gauges are foolproof liquid level indicators. F stainless steel control panel.

• Driven Type: Mechanical
• Color: Black, Brown
• Condition: New, Used
• Automatic Grade: Manual
• Capacity: 100-5000nm/hr

COOL EMAIL 

psa nitrogen plants, oxygen plants, Heatless Air Dryers, Dehumidifiers

nitrogen gas plant, Ammonia Cracker, Gas Purification System

Nitrogen Plant, Oxygen Plant, ammonia crackers, compressed air, gas dryers