Non Asbestos Gaskets Dealers in Masjid Bunder, Mumbai

• Type: Non Asbestos Gaskets
• Material: Non Asbestos
• Shape: Flat Gasket, Sheet
• Application: Cement Plants, Chemical Process Industries, Oil & Gas Sector, Thermal Power Stations
• Color: Green, Red, Yellow, Black, Blue, Gray
• Condition: New, Used

Non-Asbestos Gaskets are made from a mixture of Aramid, Carbon Fiber, Mineral Fiber, Glass Fiber and NBR, SBR, EPDM, Hypalon Rubber. Vegetable fiber Gaskets are very low cost alternative and though economical will never give the same performance as the Aramid nonAsbestos Gaskets or even the old Asbestos Gaskets. Non-Asbestos Gaskets are also referred to as 100% AsbestosFree Gaskets. Recommend demanding proper certification for Product, Manufacturing Plant & Medium compatibility.    Aramid based Gaskets offer 5X Times better performance than even CAF Gaskets. Inspite of this, Vegetable Fiber Gaskets being economically comparable to CAF are erroneously used. These Gasket Sheets  manufactured by paper making techniques utilizing plant fibers and a glue-glycerine impregnation can only be used for sealing simple solutions with low pressure and low temperatures.  Its maximum temperature limit is 250°F (120°C) and pressure (35 Bar). While, Aramid and Glass FIber Sheets can even go all the way upto 600 Deg C (API 607) certified and offer better acid and alkali protection. Aramid Sheets offer the best performance for general applications involving pressure of more than 50 Bar. Carbon Fiber based Sheets offer the best performance in Acidic environments. Metallic reinforcement is not required in nonAsbestos Gaskets. We offer Donit Tesnit (Made in Europe) 100% AsbestosFREE Certified nonAsbestos Gaskets.   Asbestos Free Gaskets are similar to non-Asbestos Gaskets but if the Manufacturing Plant is not certified 100% Asbestos Free, these Asbestos Free Gaskets might contain traces of Asbestos.   All nonAsbestos Gaskets are Asbestos Free Gaskets but all Asbestos Free Gaskets might not be nonAsbestos. Whether traces of Asbestos is acceptable or not in the product depends upon company policy. Most Manufacturers will provide a declaration certifying the Product as 100% Asbestos Free and the Manufacturing Plant also as 100% Asbestos Free for proper QC. The abscene of these certification or avoidance of using the term 100% can be due to traces of Asbestos in the product. 

CAFNon Asbestos Gaskets are die cut or circle cut from compressed asbestos fibre non asbestos jointings which are manufactured from carefully selected fibre intimately blended with suitable heat resistant binders etc. and vulcanised into sheets of homogenous compositions and uniform thickness. CAFNon Asbestos cut gasket seal is effected by yielding or flow of material into the imperfections of joint contact faces. In this way gasket provides an unbroken barrier of homogenous structure through which no pathway exist for escape of confined media.

• Shape: Round
• Thickness: 1-10mm, 2-16mm
• Weight: 50-100g, 100-150g
• Finishing: Coated
• Width: 0.5-2mm, 8-20mm
• Dimension: 2-30mm
• Packaging Type: Carton Boxes

• Compressibility: 12%
• Size: OD=<1500mm(special size can be made as request)
• Pressure: 3.5MPa
• Lateral Tensile Strength: 8MPa
• Recovery: =<40%
• Thicknesses Available: 0.4mm, 0.5mm, 0.8mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 6.4mm
• Stress Relaxation: =<50%
• Sheet Size Available: 1.5M x 2M
• Advantages: Excellent Heat and Pressure, Chemical Resistant, Non-stick, Good for use with water

Ready Cut gaskets are cut from Non Asbestos/ Asbestos Free jointing sheets ; Please specify Gasktes are to be1. Non Asbestos material: Basic, High Pressure, Oil, Acid, etc2. As per ASA 150# (default)/ 300#, etc or Table D/ F, etc;3. Ring type(default)or Full Face4. Diameter in inch/ mm NB and Qty gasket, head, car, exhaust, cylinder, manifold, engine, seal, material, rubber, oil, valve, sheet, repair, seals, metal, sealing, neoprene, silicone, epdm, materials, manufacturers, supplier, ptfe, spiral wound, graphite, CAF, O ring, packing, mechanical, industrial, high temperature, etc

CAF/Non Asbestos Gaskets are die cut or circle cut from compressed asbestos  fibre / non asbestos jointings which are manufactured from carefully selected fibre intimately blended with suitable heat resistant binders etc. and vulcanised into sheets of homogenous compositions and uniform thickness. CAF/Non Asbestos cut gasket seal is effected by yielding or flow of material into the imperfections of joint contact faces. In this way gasket provides an unbroken barrier of homogenous structure through which no pathway exist for escape of confined media. Inseal International is the leading manufacturer and supplier of Asbestos Gasket in India. Asbestos made of high quality’s long asbestos fiber, rubber and heat-resisting packing material, compressing it to thick paper. Please refer to Asbestos Jointing Sheets to select the type of Material required depending on temperature and pressure requirements. Non-Asbestos Jointing Sheets are made of special non-asbestos heat-resisting fiber, heat-resisting packing material, and special rubber compound heating and compression molding it. Please refer to Non – Asbestos Fibre Jointing Sheets to select the type of Material required depending on temperature and pressure requirements. Uses: Used in the high temperature and high pressure. For the equipment in saturated vapor, super hot vapor, gas, air, gas, ammonia alkali, and inert gases and other mediums etc. And used as sealing material in the joints of pipeline.

• 400°C: 250°C

Also available with anti-stick coating or graphite coating.Size: 1500mm x 1600mm To 4500mm,Sizes in Thickness: 0.4, 0.5, 0.75, 1, 1.5, 2, 3, 5 (All sizes are in mm) Max. Operating Pressure in Bar: 80 bars

Non Asbestos Gasket, Asbestos Products, Rubber Product

Non Asbestos Gasket, metallic gasket, PVC Door Strip, Asbestos Rope