Non Asbestos Sheets Dealers in Mohammed Ali Road, Mumbai

• Temperature: 400oC

A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers. General purpose gasketing material suitable for use with Oils, Solvent, Gases, Water, L.P.Steam and most dilute acids and alkalies (low service conditions).

• Thickness: From 0.3mm upto 5mm

An economonical Non-Asbestos gasket sheet made witd natural fibres and Rubber Solution.An economonical Non-Asbestos gasket sheet made witd natural fibres and Rubber Solution.

This type of Non-Asbestos Jointing Sheets are suitable for use with gases, water, low pressure steam and dilute acids and alkalies. Available with wire gauze insertion. Also available with anti-stick coating or graphite coating.

Max. Short Term Service Temperature 400oCMax. Continuous Service Temperature 240oCMax. Operating Temperature for Steam 200oCMax. Operating Pressure in Bar 75 barsSheet Size: 1.5 mtr width x 1.5 mtr AF High Pressure Asbestos Free Gasket Sheets are used for oils, solvents, water, steam, gases, dilute acids and alkalies, glycols and aqueous solution. Available: Non Metallic/ Metallic

Gasket Selection:Gaskets must maintain a seal for an acceptable period against all of the operational forces involved and to achieve this there are eight important properties which any good gasket should possess: The gasket should not be porous to the fluid being sealed. The gasket should compress into the imperfections on the flange to create initial seal on application of sealing force. The gasket should not show significant creep under the influence of load and temperature. Such flow will allow the bolts to relax, reduce gasket surface stress and cause leakage. The gasket should be capable of catering to slight distortion between the flanges. The gasket should withstand chemical attack from the media being handled. The gasket has to be easily dismantled after use. The gasket should be able to withstand effects of temperature of the confined media. The gasket should not cause corrosion of the flange faces. Champion Asbestos free jointing sheets are manufactured on latest factory equipments and developed with the aid of research and scientific facts to take care of one and all of above factors combined with highly specialised technical knowledge of Engineers with experience of a life time. Our products meet with the increasingly exacting requirements in Engineering and chemical industries for contact gaskets on fixed sealing faces. Champion Asbestos free jointing sheets are manufactured to international quality standards, which our customers can depend upon. The operating temperature for Asbestos free jointing sheet material is related to the thickness selected. Thinner materials offer better temperature and pressure properties.SHEET SIZE: 2M x 1.5M upto 6M (variation±5%)Nominal Sheet Thickness Approx: 0.4/0.5, 0.75/0.8,1.0,1.5,2.0,3.0 mm upto 6.0 mm (variation ± 5%) 

Non Asbestos Jointing Sheet, ptfe lining, Pvc Rods, PTFE Sheet, Ptfe Rod

Non Asbestos Jointing Sheet AF 139, metallic gasket, PVC Door Strip

Non Asbestos Gasket Sheet, Rubber O Rings, polyurethane washer

Non-Asbestos Gasket Sheet, Chisel, Oil Tapes

Non Asbestos Ceramic Millboard Sheet, ptfe thread sealant tape, hdpe products