Non Asbestos Sheets Dealers in Mumbai

• Feature: Durable Coating, Tamper Proof, Water Proof
• Surface Treatment: Coated
• Max. Operating Temperature for Steam: 200 deg C
• Maximum Operating Pressure: 150 bars

From the point of view of marketing, shipping, and handling, our products are securely packed in top-grade supplies using ultramodern packaging machines. The packaging is extremely reliable. We have an extensive supply-chain system that empowers us to ensure a distribution of consignments is done within the postulated time.

We are dealers of jointing sheet of asbestos and non asbestos jointing sheet of champion company available in thickness up to 5 mm with variious temparture and pressure range as per requriment we guide our customers for specific grade,.

• Temperature: 400oC

A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers. General purpose gasketing material suitable for use with Oils, Solvent, Gases, Water, L.P.Steam and most dilute acids and alkalies (low service conditions).

Max. Short Term Service Temperature 450oCMax. Continuous Service Temperature 250oCMax. Operating Temperature for Steam 250oCMax. Operating Pressure in Bar 150 barsSheet Size: 1.5 mtr width x 1.5 mtr AF Extra HP Asbestos Free Gasket Sheets are used with oils, solvents, gases, steam, acid and alkalies. Excellent tensile strength. Outstanding gas salability. High resistance to creep under elevated temperatures & pressure. Available: Non Metallic/ Metallic

• Board thickness in MM:  No. of sheets per crate
• 3.0: 30
• 4.0: 25
• 5.0: 20
• 6.0: 15
• 10.0: 9
• 12.0: 7

we offer non-asbestos millboard sheet that is fabricated from selected clean, long non-asbestos fibres of uniform quality assorted with suitable incombustible binding materials. These ceramic millboards are known for its features such as heat and fire resistance and strength. Our non-asbestos millboards are perfect at temperatures up to 500°c (932`f) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400`c. These are also known for its features such as withstanding vibratory and impact loads easily. available is soft, medium and hard grades, these sheets can be cut, drilled and screwed to supporting beams, and can be moulded or cemented to any shape. The medium grade is supplied only if it is specially asked by our clients. The hard grade is stiff and brittle and is used where rigidity is needed.   features :• high temperature tolerance• strength• can easily withstand vibratory and impact load• available in various grades• acid, sound and vermin-proof• strong and flexible packing method :• non-asbestos millboard sheet is packed into wooden crates of approx 110 kilogram• number of sheets in one crate varies according to board thickness.

Compressed asbestos fibre jointings are manufactured from carefully selected chrysotile fibres, intimately blended with suitable heat resisting binders, fillers and vulcanised into sheets of homogenous compositions and uniform thicknesses.

Description: Non-Asbestos Jointing Sheets are cost effective products that manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers. Service: General purpose gasketing material suitable for use with Oils, Solvent, Gases, Water, L.P.Steam and most dilute acids and alkalies (low service conditions).

Gasket Selection:Gaskets must maintain a seal for an acceptable period against all of the operational forces involved and to achieve this there are eight important properties which any good gasket should possess: The gasket should not be porous to the fluid being sealed. The gasket should compress into the imperfections on the flange to create initial seal on application of sealing force. The gasket should not show significant creep under the influence of load and temperature. Such flow will allow the bolts to relax, reduce gasket surface stress and cause leakage. The gasket should be capable of catering to slight distortion between the flanges. The gasket should withstand chemical attack from the media being handled. The gasket has to be easily dismantled after use. The gasket should be able to withstand effects of temperature of the confined media. The gasket should not cause corrosion of the flange faces. Champion Asbestos free jointing sheets are manufactured on latest factory equipments and developed with the aid of research and scientific facts to take care of one and all of above factors combined with highly specialised technical knowledge of Engineers with experience of a life time. Our products meet with the increasingly exacting requirements in Engineering and chemical industries for contact gaskets on fixed sealing faces. Champion Asbestos free jointing sheets are manufactured to international quality standards, which our customers can depend upon. The operating temperature for Asbestos free jointing sheet material is related to the thickness selected. Thinner materials offer better temperature and pressure properties.SHEET SIZE: 2M x 1.5M upto 6M (variation±5%)Nominal Sheet Thickness Approx: 0.4/0.5, 0.75/0.8,1.0,1.5,2.0,3.0 mm upto 6.0 mm (variation ± 5%) 

• Thickness: From 0.3mm upto 5mm

An economonical Non-Asbestos gasket sheet made witd natural fibres and Rubber Solution.An economonical Non-Asbestos gasket sheet made witd natural fibres and Rubber Solution.

We put forth a comprehensive range of Asbestos Woven Non Metallic Sheet which is used in diverse industries all across the nation. Being an ISO certified organization, we manufacture these asbestos free woven metallic sheets using premium grade material, which are sourced from the reliable vendors of the markets. Further, offering them in proper packaging and at industry leading prices. Other Technical Data Sheets Are Available On Request.

• Operating Pressure: 25 bars

A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers. General purpose gasketing material suitable for use with Oils, Solvents, Gases, Water, L.P.Steam and most dilute acids and alkalies (Low service conditions).

General purpose gasketing material suitable for use with oils,solvents,gases,l.p. steam and most dilute acids and alkalies.

non asbestos sheets, Asbestos Gasket, Rubber Gaskets, PTFE Sheets

non asbestos sheets, Asbestos, non asbestos packings, asbestos packings

Non Asbestos Jointing Sheet AF 139, metallic gasket, PVC Door Strip

Non Asbestos Jointing Sheet, ptfe lining, Pvc Rods, PTFE Sheet, Ptfe Rod

Non asbestos Roofing Sheets, fibre cement board, Cement Wood Plank