Non Return Valves Dealers in Goregaon, Mumbai

• Type: Non Return Valve
• Brand Name: SWAGELOK TYPE
• Material: Steel
• Certification: ISO 9001:2008 Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting, AUTO MOBILE, CHEMICALS, PETROCHEMICALS, OIL & GAS, NUCLEAR, POWER PLANT, PHARMACEUTICAL, MARINE, PAC
• Weight: 10-15kg
• Condition: New
• End Connection: Butt Weld, Flanged, Screwed, Socket Weld Ends
• Size: 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 400-450mm, 450-500mm, 50-100mm
• Pressure: High, Low, Medium
• leakage proof: durable
• anti - corrosive: high perfomance

In order to pace with the technology, we have developed a payment procedure that allows us to make safe and secure transactions. Also, our system is verified by authority. Stay rest assured for the products that we offer as they will remain damage free. For this, we make use of only premium packaging material for the packing of the products.   Details : Spring closing arrangement for the prevention of reverse flow in pipelines. These valves are general-purpose valves that are stronger, lighter and smaller than conventional swing check valves and   therefore, less expensive to install and maintain. Suitable for higher pressure/temperature (up to 400*C) Compact Design for simple installation between wide ranges of flange types. It can be mounted in any plane/direction. Extremely low opening pressures. Available sizes 15mm to 100mm, suitable for PN6-PN40 and ANSI 150/300. Weight and Dimension are same for class 150 & class 300 valves. Valves are self-centering type. Zero leakage for soft seated valves. The maximum permissible leakage rate shall be 3 cubic centimeters per inch of nominal pipe size for metal-seated valves. Testing - As per API 598 Design - As per manufacturers standard.   Material of Construction : Body : AISI 316, WCB. Disc :   AISI 316 Spring : Standard AISI 316 Spring Nimonic - for high temperature up to 400c Disc Seat - Standard, EPDM/Nitrile, Soft seated-for water-silicon/viton soft disc seating face - for oil & gases.   General Construction : Metal to Metal seated Construction Soft seated (EPDM/Nitrile/ Silicon/viton) construction       PRESURE RATING : PN 40   Flange Standard : BS 10 Table D, E *& H DIN: PN6, 10 16, 25, 40 ANSI 150 and 300   Operation : Non Slam Check Valves are opened by the pressure of the fluid and closed by the spring as soon as flow ceases and before reverse flow occurs.   Installation : Non Slam check valves simply fit between two pipe flanges  Standard gaskets are used on either side of the valve together with longer bolts or studs.

• Material: Metal
• Color: Blue
• Condition: New
• End Connection: Screwed
• Size: Available In Different Sizes
• Pressure: Medium
• Feature: Durable
• Finish: Coated

Nrv

We offer a large assortment of optimum quality Non Return Valves for air line. Our Horizontal Non Return Valves are manufactured from the finest quality raw materials using advanced technology machines. Extensively used in varied industries, our Industrial Non Return Valves are in huge demands in the market. Our Industrial Non Return Valves are easy to install that provides a long lasting trouble free performance. Anti abrasive nature and non corrosive property ensures high durability of Industrial Non Return Valves. We have carved a niche as one of the ecstatic Industrial Non Return Valves Manufacturers and suppliers based in India.

Tiger" Brand Non-Return valves are equipped with a unique sealing arrangement that transmits pressure directly to the body and provides zero leakage over a long life operations. Non-Return Valves are suitable for pressure up to 6000 PSI. It prevents backflow of the fluid, thereby protecting the equipments or instruments from getting damaged. FEATURES Available in a variety of end connections. It can be easily mounted horizontally or vertically. It is used in pump suction and discharge lines.  PMI (Positive Material Identification) Test available on request. Hydraulic Test Pressure: up to 420 Kg/Cm². Pneumatic Test Pressure: up to 60 Kg/Cm².  Standards Followed: MSS-SP-99/ASME B16.11/B1.20.1/ISO 228/BS 4368 Part IV/BS 3799. Marking and Identification of Valves as per MSS-SP-25. Inlet arrow marked on the valve body.

• Brand Name: Sanipure Water Systems
• Pressure: High pressure
• Category: Valves
• Product name: Stainless Steel Non Return Valve
• Material type: Stainless steel SS 304L, SS316L
• Min order Qty: 1pc
• Packaging Type: Wooden, Carton, Corrugated Box, Plastic Wrap
• Size in Inch: 1/4″ – 3/4″
• temp: -10deg to 120deg
• Connection type: Threaded mounted
• Features: Aesthetic look  Corrosion-free Precision made Smooth surface finishing Highly durable Easily washable Cost-effective

• Type: Flange End & Screwed End Type
• Material: Polypropylene, HDPE, Isotactic PP, PVDF
• Body: 200 PSI
• Seat: 150 PS
• Temp: 100 C
• Construction: 3 Piece Design, Single Piece Stem (spindle) Reinforced Ball, Teflon Seated, Full Bore
• Design & Manufacturings: As per Manufacturer's Standard
• End Connections: Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD.

• Size: 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm
• Type: Screwed End
• Material: PP
• Certification: ISI Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: White
• Pressure: High, Low, Medium
• Feature: Blow-Out-Proof, Casting Approved, Crack Proof, Durable
• End Connection: Butt Weld, Flanged, Screwed
• Condition: New

• Design and Manufacturing: IS 5312 (Part 1): 2004
• Valve face to face dimensions: IS 5312 (Part 1): 2004
• Valve Inspection and Testing: IS 5312 (Part 1): 2004
• Flange Standard: IS 1538/BS 10 Table D/E
• Size Range: 50mm TO 300mm

The Cast Iron Swing check type Reflux Valves are strictly manufactured as per IS: 5312 Part-I. These Valves are generally used to maintain flow of water in only one direction and stop the return flow of water. They are self operative by pressure only. These valves are used in water main lines all over the world especially in hilly areas. These can be fitted in horizontal position.

• Sizes For Threads: 6 MM to 15 MM
• W.P.- BAR: 250

Non Return Valves with tube Valve Body - Steel Phosphatised Yellow chromatize trivalent Zinc Blue Passivation, W.P. = Low Pressure = 200 bar & High Pressure up to 400 bar, All other Parts are trivalent Zinc with Blue passivation

• working temp.: 90°C
• Test Pressure: 10 kg upto 4" 6 kg for 6"

Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm, Manufactured from Poly Propylene, a Chemically inert thermoplastic, Can be used upto 90°C Temp, Hydraulically and Pneumatically tested for 10 Kg upto 4", Protective and Resistive from most of the corrosive Chemicals.

Non Return Valves, Castings, Alloy Steel Castings, annealing covers

Non Return Valves, Fittings, valve pipe flange, Pipe

Non Return Valves, pipes & fittings, Steel Plates, Steel Sheets

Non-Return Valves, Air Compressors, Air Compressor Parts, CHILLERS

forged steel gate globe nrv valve, Pressure Reducing Valve

Non Return Valves, hydraulic fitting parts, X Tube Metric check valve

Non Return Valves, Continuous Stirred Tank Reactor, Tube Fitting

Non Return Valves, front ferrule, Hex Coupling, Hex Female Pipe Cap

Non Return Valves, Fans, Table Lamps

Non Return Valve, Quick Release Coupling, Needle Valve, Reducer