Non Return Valves Dealers in Mumbai

Established as a dignified name, we are the celebrated organization in the market offering quality Steam Wafer Type Non Return Valve. To maintain high-quality standards, we make certain that the assortment of products is kept safe with utmost proficiency. We keep the products well stacked in order to avoid any damage.   Details : Spring closing arrangement for the prevention of reverse flow in pipelines. These valves are general-purpose valves that are stronger, lighter and smaller than conventional swing check valves and therefore, less expensive to install and maintain. Suitable for higher pressure/temperature (up to 400*C) Compact Design for simple installation between wide ranges of flange types. It can be mounted in any plane/direction. Extremely low opening pressures. Available sizes 15mm to 100mm, suitable for PN6-PN40 and ANSI 150/300. Weight and Dimension are same for class 150 & class 300 valves. Valves are self-centering type. Zero leakage for soft seated valves. The maximum permissible leakage rate shall be 3 cubic centimeters per inch of nominal pipe size for metal-seated valves. Testing - As per API 598 Design - As per manufacturers standard.   Material Of Construction : BODY : AISI 316, WCB. DISC: AISI 316 SPRING: Standard AISI 316 Spring Nimonic - for high temperature up to 400c DISC SEAT - Standard, EPDM/Nitrile, Soft seated-for water-silicon/viton soft disc seating face - for oil & gases.   General Construction : Metal to Metal seated Construction Soft seated (EPDM/Nitrile/ Silicon/viton) construction   Presure Rating : PN 40   Flange Standard : BS 10 Table D, E *& H DIN: PN6, 10 16, 25, 40 ANSI 150 and 300   Details : Opetation : Non Slam Check Valves are opened by the pressure of the fluid and closed by the spring as soon as flow ceases and before reverse flow occurs. Installation : Non Slam check valves simply fit between two pipe flanges  Standard gaskets are used on either side of the valve together with longer bolts or studs.

We bring forward Lift Type Non Return Valves to meet fluid control requirements of industries, like petrochemical, chemical, sugar, pharmaceutical and others. The design of valves does not include penetration, which is the best feature of it. The seal welded seat ring has been provided for easy replacement and fully guided disc is there to ensure restriction free travel of fluid.

• Country of Origin: India
• Type: Non Return Valve
• Material: Stainless Steel
• Certification: ISO 9001:2008 Certified
• Usage: Gas Fitting
• Color: White
• Temperature Pressure: Medium Temperature Pressure
• Number Of Way: 2way
• Condition: New
• Finishing: Polished
• Corrosion Resistance: No
• Media: Gas
• Valve Size: 1inch
• Packaging Type: Carton

We are engaged in manufacturing, exporting, distributing and supplying excellent quality Non Return Valve in Mumbai, Maharashtra, India. Valves: Gaskets are made from SS316L material. Valve handwheel is made of suppressed steel. Application : Steam, water, oil.

The requirements of varied industries, we have come up with a broad array of Non Return Valve. These valves are extensively designed by the engineers to prevent the reverse flow of liquids in different machineries. Customers highly availed our range for its dimensional accuracy, durability and high capability of allowing the liquid to flow in only one direction. Our products are manufactured from high grade raw material and sophisticated technology under the supervision of quality analyst to ensure its reliable performance.

We offer a comprehensive range of top-notch quality Gate Valves. A Gate Valve is a type of valve which acts as a gate in the flow of the fluid. Specially forged with the latest scientific technologies and premium quality raw materials, our products are highly recommended for ultimate strength, hardness and durability. Compliant to the international standard, we also offer these products in various sizes and dimensions.

• Size: 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm
• Type: Screwed End
• Material: PP
• Certification: ISI Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: White
• Pressure: High, Low, Medium
• Feature: Blow-Out-Proof, Casting Approved, Crack Proof, Durable
• End Connection: Butt Weld, Flanged, Screwed
• Condition: New

• Available Design: Vertical, Horizontal, Wafer, Dual Plate, Swing Check Valve
• End Connection Type: Screwed, Flanged
• Available Material: GM, CI, CS, SS

• Pressure Rating :   ASA 150 # / 300 #
•   Design:   API 594
•   Pressure Test:   API 598
•   End Connection:   Wafer Type Suitable to mount between   ANSI B16.50/ BS10 Table 'D/E/F' Flanges
•   Operation:   CS / SS304 / SS316 / WCB / CF8 / CF8M & Higher Alloys on request
•   Size Range:   15mm to 200mm.

• Material: Stainless Steel
• Application: Dairy / Food / Beverage / Pharmacy / Cosmetic / Chemical
• Standards: 3A / SMS / DIN / RJT / IDF
• Finishing: Polished
• Connection Type(s): Weld End / Clamp End / Thread End

Heavy-duty Body of lined ball valves can withstand varied pressure fluctuations with ease. Appreciated for superb flow control properties, the lined ball valves are quite economical for long run. Our valves come with exchangeable PTFE seat rings and find application in crop science and power pesticides, among other areas. Some features of these are given below: Ball Stem is sealed by a PTFE V-ring packing.

• Material: Stainless Steel
• Working Temperature: -10o
• Feature: Casting Approved, Durable
• Spring: Stainless Steel Sanitary Both Closing Design, Both Opening Design is Required.
• Seal Ring of Stem: EPDM. Viton or Silicon is Required
• Body O-ring: NBR or EPDM. VITON is Required

Product Details :Body: SS 316. SS304 and SS316L are required based on big volume. Fully precision machined by CNC machine. Angle design make the biggest flowing liquid as well as for disk easy open and close. Connection: clamp end, weld end, male end and female end are available from 1/2", 3/4" up to 4". Connection: weld end are available the tubing according to 3A, SMS, RJT(BS), DIN 11851. Middle clamp designed are available from 1/2", 3/4" up to 3". Middle flange designed are available from 1/2", 3/4" up to 4". Type of ends available: 3A: Clamp, Weld, Bevel male and female are available from 1/2" up 4" SMS: Weld end, male and female end are available from DN25 up to DN104. DIN: Weld end, male and female end are available from DN28, DN34, DN52, DN70, DN85 and DN101.6, DN104. I-Line: available from 1" up to 4".

• Material: Metal
• Color: Blue
• Condition: New
• End Connection: Screwed
• Size: Available In Different Sizes
• Pressure: Medium
• Feature: Durable
• Finish: Coated

Nrv