Oscillating Granulator Dealers in Andheri, Mumbai

Oscillationg Granulator are available in various sizes, the most common size in 488mm width 510mm length, available from 0.5mm to 25mm holw diameter perforation the size below 0.5mm can be had in wire mesh design. These are availabe complete set of Certificates.

• Model: RDOG – Horizontal
• Hopper Capacity: 33 Liters
• MOC: Contact Parts SS 316 Non contact part 304, covered Cladded.
• Screen Size: 388 mm (w) x 762 mm (L)
• Stirrer size: Stirrer size
• No. of Oscillation: 110 per minute
• Output: 30 to 50 Kgs/hr (Depending on Material)
• Charging Height: 1135 mm
• Discharging Height: 655 mm
• Motor: 1 Hp/1440 rpm
• Motor Make: Crompton/Remi/Sabar
• Out Put: 75-200 Kgs/ hour (Depends upon mesh and Material nature.)
• Rotor Drive: Through Reduction Gear Box.
• Screen: Perforated type.
• Motor: 1.5 H.p. / 3.0 ph., 440 V
• AC Frequency Drive: (Optional): To vary the desired speed.

Granulation: Mechanical process in which the product is pressed through a sieve with a specially shaped rotor-arm to obtain a desired particle size.  This process results in a narrow distribution spectrum as only the product having the right shape, size & position is broken & passed through the sieve Features :  ·         Robust, Simple & Compact design. ·         Stainless Steel Construction. ·         Easy Installation in Production Line. ·         Oscillating Rotor Motion. ·         High Output. ·         Uniform Granules, Less Fines ·         Low noise level as per international norms. ·         Maintenance Free ·         Easy for Cleaning.    Oscillating Rotor : The oscillating motion of the rotor improves the granulating process. This sensitive handling of the product emulates the hand operation of  an experienced pharmacist. One important feature of the oscillating granulator is the continuous variation of the speed & force applied to the material.  The back & forth motion of the  rotor results in an even distribution of the material.   Complete Stainless Steel.  All parts in contact with the product in AISI316 / 316L Inside polished Ra = 0.8 micron, outside ground (grain220)  Maintenance free design, GMP execution.

Most suitable for dry granulation provided with hexagonal rotor having oscillating movements.1 No. Stainless Steel sieve is supplied with machine that can be changed to any desired mesh by quick opening and locking arrangement.

FEATURESOscillating Granulator, plays an important part in the process of granulation in tablet making as quality of tablet is determined by the virtue of the granules used for its compression. Oscillating granulator can be used for wet and dry aspect of the granulation processQuality of granules are better compared to other processing machineries like multi mill, comminuting mill etc.All contact parts are in stain steel Mounted on a baseAdjustment, cleaning and operation are simpleSturdy, durable, better productivityUnique oscillatory rotor action ensures high outputs and a predictable product with minimum of fines

• Features: Easy installation, maintenance and long service life.

The rotating sieve mill guarantees optimum sizing results plus excellent flow rates. The 360-degree rotor movement ensures constant, uniform speed and force effect for gentle sizing of the product.The advantage of this process resides in an exceptionally low fine particle fraction in the end product, as well, the low mechanical stress allows for the capability of processing heat sensitive products.

This machine gives high output with less percentage of fines and has the salient features like Robust Simple and Compact design, Easy installation in production line, Uniform granules, Maintenance free and can be attached with Vacuum loading and discharge arrangement or Gravity flow system. The granulating chamber and internal parts are totally washable from inside. The inner surfaces are mirror polished to prevent adherence of the product and facilitate cleaning. Sliding rails and fast fixing devices allow easy mounting and dismantling of the accessories. The oscillating motion of rotor gives uniform granules with less fines. Granule size varies as per the perforation of sieves. The simple design of Rotor and Sieve mounting facilitates easy cleaning and quick change over. Externally fitted bearing housings prevent the product coming into contact with bearing lubricants and hence the granules will be completely free of black particles. SPECIAL FEATURES Suitable for dry & wet granulation. Easy for loading and unloading. Easy for cleaning. All contact parts are made out of SS304 quality material. (SS316 will be provided on demand) Simple & compact design requires minimum maintenance. Higher output. Maintenance free.

Oscillating Granulator, v-type blenders, Pharmaceutical Machinery

Oscillating Granulator, lead free silicone moulded sieves for vibro sifter