Oscilloscope Dealers in Sion, Mumbai

  An oscilloscope is easily the most useful instrument available for testing circuits because it allows you to see the signals at different points in the circuit. The best way of investigating an electronic system is to monitor signals at the input and output of each system block, checking that each block is operating as expected and is correctly linked to the next. With a little practice, you will be able to find and correct faults quickly and accurately

• Brand Name: SIGNET
• Driven Type: Electronics Laboratory Instruments
• Color: Grey
• Condition: New
• Application: Laboratory Use
• Voltage: 220V
• Type: Laboratory Testing Instruments
• Weight: 0-10kg
• Warranty: 1yrs
• Country of Origin: India

An oscilloscope is easily the most useful instrument available for testing circuits because it allows you to see the signals at different points in the circuit. The best way of investigating an electronic system is to monitor signals at the input and output of each system block, checking that each block is operating as expected and is correctly linked to the next. With a little practice, you will be able to find and correct faults quickly and accurately. Feature:   High luminance, internal graticule CRT Japanese electronic encoder,light,handy and reliable Fully sealed long live vertical mode switch ALT Triggering Function. Two independent signals simultaneous observation Build-in 6 Digit Frequency Counter 30MHz Dual Channel 10 times sweep magnification TV Synchronization-Y mode   Specification   Horizontal System Sweep time: 0.2uSec~0.5Sec/DIV,20steps in 1-2-5 sequence; Sweep time accuracy:±3% Vernier sweep time control:≤1/2.5 of panel-indicated ＆#118alue; Sweep magnification: 10 times; ×10MAG sweep time accuracy: ±5% (20nSec~50nSec are uncalibrated); Linearity:±5%,×10MAG: ±10% (0.2s~1us) Position shift caused by ×10MAG: within 2DIV. At CRT screen center   X-Y MODE: Frequency bandwidth: DC to at least 500KHz; X-Y phase difference:≤3°at DC~50KHz Sensitivity: Same as vertical axis. (X-axis:CH1 input signal; Y-axis:CH2 input signal.); CALIBRATION VOLTAGE Waveform: Positive-going square wave; Frequency: Approx. 1KHz; Duty ratio: Within 48:52; Output voltage: 2Vp-p±2%; Output impedance: Approx.1KΩ   CALIBRATION SIGNAL Waveform: Positive-going square wave; Frequency: Approx. 1KHz; Duty ratio: Within 48:52; Output voltage: 2Vp-p±2%; Output impedance: Approx.1KΩ   CRT Type: 6-inch rectangular type, internal graticule; Phosphor:P31; Acceleration voltage: Approx.2KV(20MHz)/Approx.12kv(40MHz); Effective screen size:8×10DIV[1DIV=10mm(0.39in)]; Graticule: Internal; Trace rotation: Provided   VERTICAL AXIS Sensitivity:5mV~5V/DIV,10 steps in 1-2-5sequence Sensitivity accuracy:≤3% Vernier vertical sensitivity: Continuously variable to 1/2.5 or less of panel-indicated ＆#118alue Frequency bandwidth: DC~30MHz(x5MAG:DC~7MHz)/DC~40MHz(x5MAG:DC~15MHz)DC~50MHz(X5MAG:DC~15MHz) AC coupling: Low limit frequency 10Hz. (With reference to 100KHz, 8DIV, Frequency response with-3dB.) Rise time: Approx.17.5ns (x5 MAG: Approx.50nS) Approx.8.75ns (x5 MAG: Approx.25nS) Approx.7ns (x5 MAG: Approx.23.3nS) Input impedance: Approx.1MΩ/Approx.25pF DC balance shift: 5mV~5V/DIV: ±0.5DIV, 1mV~2mV/DIV ±2.0DIV Linearity:1000:1 at 50KHz; >30:1 at 15MHz/>30:1 at 35MHz/>30:1 at 45MHz CH2 INV BAL: Balanced point variation:≤1DIV (Reference at center graticule)   TRIGGERING Triggering source: CH1,CH2,LINE,EXT Coupling: AC: 20Hz to full bandwidth SLOPE:+/- Sensitivity: 20Hz~2MHz:1DIV, TRIG-ALT:2DIV EXT:200mV；TRIG-ALT:3DIV,EXT:800mV; 2~30MHz:1.5DIV；30MHz~40MHz:2.5DIV；40MHz~50MHz:3DIV； TV: Sync pulse more than 1 DIV (EXT:1V) Triggering modes: AUTO; NORM: TV-V: TV-H: (Both TV-V and TV-H synchronize only when the synchronizing signal is negative) EXT triggering signal input: Input impedance/: Approx:1MΩ/approx.25pF; Max.input voltage:300V (DC+AC peak), AC: Frequency not higher than 1KHz

infrared thermometer oscilloscope, Tachometer, Lux Meter, Clamp Meter