Overhead Conveyor Ovens Dealers in Mira Road, Mumbai

Technical specification temp. Range : 50°c to 200°c temp. Accuracy : ± 0.2°c vacuum capacity : 760 mm of hg supply : 230v ac, single phase double wall construction. 4” thick glass wool insulation ensures stable temperature with reduced energy consumption

• Brand Name: Tempo
• Driven Type: Electric
• Color: Grey
• Condition: New
• Power Source: Electric
• Application: Laboratory
• Temperature range: 50°C to 200°C
• Temperature accuracy: ±0.1°C
• Supply: 440V, three phase

“TEMPO” make a tray dryer are with the forced air circulation provided by means of motorized blower fitted on the oven for recirculation of air which ensures a homogeneous hot air mixture and an exact temperature profile. Temperature range             –     50°C to 200°C Temperature accuracy        –    ±0.1°C Supply                                 –     440V, three phase Construction Double walls are constructed on heavy angles. All sides of the ovens are insulated with 7.5 cm thick glass wool insulation to minimize ski temperature. The panels are designed in such a way that the inner and outer wall contact to minimize the heat losses through conduction. Technical Specification Controlling System Microprocessors based autotune PID temperature controller with & dual display of set value & process value for precise control of temperature with PT 100 sensor is used for temperature. Heating System SS tubular heating elements used on the side walls to maintain a uniform temperature condition inside the chamber. Air Circulation The motorized blower fitted on the top side of the chamber develop unique airflow system which ensures maximum temperature distribution inside the temperature. The unique airflow assures that there is a quick recovery after the doors are opened. Features Double walled two doors provided with silicon gasket at front side, heavy duty hinges and ball latch locking system. Safety Features Safety standby thermostat cuts off the heater supply in case of overshoot of temperature. Models & Optional Features ModelsRating (kW) Internal Dimensions H × W × D (cm) Trays TI – 12 6 84 × 84 × 43 12 TI – 24 9 96 × 140 × 96 24 TI – 48 18 96 × 140 × 96 48   Optional Features  CFR 21 part 11 compliance software for data logger Data logger Data scanner complete with sensor Safety digital temperature controller Timer

• Feature: Robustness, Durable, Maximum efficiency

Hot air ovens are laboratory and scientific equipment which uses hot air for sterilization. The hot air oven runs at high temperature several times to destroy the bacteria. The general temperature range is between 5 deg c to 450 deg c. In this lab oven, the material is first heated from the surface and the heat gradually move towards the core. After a specific time, the oven is switched off and the material is taken out.  

• Capacity: 500-1000 Kg
• Temperature: 300-400 Deg. Celsius
• Display: Digital
• Usage/Application: HEATING APPLICATION
• Brand: MAGMA

• Type: Automatic
• Certification: CE Certified
• Warranty: 1 Year
• Voltage (V): 320V
• After-sales Service Provided: Spare Parts
• Fuel: Gas

Uniform heating across entire area of the oven Quick & Fast Heating at desired temperature. 100% Safety in Operation on all types of heating Comparative Less Consumption of Fuel. Convection/Direct/Indirect/Infrared Heating System Customized sizes designed to meet customers’ requirements Gas burner with VPS system. Heat exchanger SS304 10guage sheet, SS304 pipes. Damper on top of Oven to vent out air with Modulation motor.

Description   This range of pizza ovens is manufactured utilizing SS 202 & 304 in complete adherence with the industry laid norms. In addition to this, the offered range is available with a power load of 3.5 kw and it comes in six standard sizes.In order to append and respond to the assorted requirements of the esteemed clients, we are able to dispatch a superior range of Pizza Oven.   High performance  Silent operation  Dimensional Accuracy  Safe to use

• Power Source: Electric
• Type: Single Deck
• Capacity: 0-100 Kg
• For Baking: Pizza
• Operation Type: Automatic
• Size: Big/Large
• Usage/Application: Commercial
• Door Type: Single Door
• Body Material: Stainless Steel

CURING OVEN 4 mtr X 2 mtrs X 2.5 mtrs fully automatic inside ss 304 outside ms with steam generator ( 20,000 panels) 3 mtr X 2 mtrs X 1.8 mtrs fully automatic inside ss 304 outside ms with steam generator ( 10,000 panels) Our Curing Ovens are designed and manufactured with precision & the highest quality in the industry. Each oven is customized to fit the customer’s requirement for productivity and safety. Alpha Solutions offer a variety of Curing oven arrangements to fit both space and production requirements. Whether you need small oven or large, Alpha Solutions can build the oven to suit your needs or you can choose from one of the many standard designs. Expandability : It start with a lower capacity and expand in 2500 panels increments up to 30000 panels. Options : There are various options available • Steam Generator• Spray Nozzles/Humidifies• High Pressure Vaporizer• Electrically Heating System• Gas Fired Heating System• Process Heat Recovery System• Advanced temperature and humidity• Monitoring and controlling system Serviceability : New diagnostics assist in trouble-shooting problems to minimize downtime and maximize quality Versatility : Our experience in building custom ovens for all industries can be put to the test if you need that special oven configuration designed to fit your needs. Our Customer knows that A S India INC. ovens can change right along with their needs. Alpha Solution’s Plate Curing Oven Features : • PLC / Microprocessor-based digital temperature controls.• Temperature recorders as standard equipment on conveyor models• Non-overloading circulation fans• Adjustable air orifices• High Temperature light fixture inside oven• Bottom to top airflow forced and natural convection heating• Access doors for inspection and maintenance• 4-inch insulated oven panel construction with steel frame• experienced service staff and large supply of spare parts. Steam Generators High pressure steam generators are essential for many industrial processes that require heating media temperatures at very high level. We are engaged in offering a wide range of Fully automatic products. These are most suitable for continuous supply of ultra-dry steam and are highly fuel efficient. What is Curing ? • The modern Trend is towards use of lead sub oxide with 30% metallic lead• The presence of metallic lead has brought significant changes in the methods of handling plates immediately after being pasted. • The need for such changes arise from the peculiar behavior of pulverized lead in the presence of air and moisture. In a perfectly dry condition, lead does not oxidize and this is equally true in case of abundance of water. • The latter condition is beneficial in operations until the actual pasting of plates. • Once the paste is applied to the grids, the residual moisture, the atmospheric humidity and ambient temperature all become significant. • The problem then is to control these three factors so that oxidation to litharge occurs and the free lead content is reduced from 25 %- 30% to less than 3% Why is curing process important ? • Proper curing improves strength of the dried plates.• It also result in proper bonding of interface between the grid and the paste .• Improper curing results in scaling or shedding of active material during formation process or service lifeWhy is curing a special process? • In battery manufacturing, curing is the special process where the result of the output cannot be verified by subsequent monitoring or measurement. As a consequence deficiencies become apparent only after the product is in use or services has been delivered. • To control the process, the following measures are required: • Defined criteria for review and approval of the process• Approval of equipment and qualification of personnel• Use of specific methods and procedure• Requirement of records• Re – validation 

Infrared ovens are being widely used in various applications like paint finishing, powder coating, plastic moulding, ink drying, automobile, audio accessories, stationery etc. Infrared emitter is selected depending upon various factors like application, wavelength etc. Types of emitters are reflector heat lamp, quartz tube and ceramic emitter. Rapid heating of the product and low energy cost as the heat is targeted to the required surface.

• Finishing: Polished, Powder Coated
• Packaging Type: Wooden Box, Carton Box
• Pressure: Low Pressure, Medium Pressure
• Working Temperature: 100-200 Deg. Celsius
• Storage Capacity: 0-50L, 100-200L
• Overall Weight: 100-1000kg
• Usage: Drying
• Specialties: Shocked Proof, Long Life, Rust Resistance
• Dimension (LxWxH): 295x150x235mm
• Type: Vacuum Oven
• Brand Name: KUMAR
• Material: Mild Steel
• Shape: Rectangular
• Certification: ISI Certified
• Color: White
• Voltage: 220V
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Phase: Single Phase
• Warranty: 1 Year
• Power Source: Electricity
• Application: Laboratory
• Application: Laboratory use
• Automatic Grade: Automatic

Digital Temp. (PID) Controlled Six Cell AGeing Oven with Digital Hour Meter, Rotameter for AIr flow measurement. Inbuilt Air pump for each cell. ALl Cells are different. Different temperature can set in each Cell . Range: 50 to 200Degree Centigrade. With Data Logger.

• Brand Name: Bhawani Engineering
• Power Source: Electric
• Warranty: 1 Year
• For Baking: Biscuit/Cookies
• Operation Type: Automatic
• Usage: Bakery
• Body Material: Stainless Steel
• Power Consumption (KW): 4.7 KW

• Type: Industrial Electric Ovens
• Application: For Baking, Heating Food Items
• Weight: 15-20ltrs, 20-25, 25-30ltrs
• Color: Black, Grey, Light Blue, Red, White
• Voltage: 220-250v
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6, 6-8kw, 8-10kw
• Driven Type: Electricity
• temprature: 0-100°c, 100-200°c, 200-300°c

Developed by using sophisticated techniques, our round vacuum oven is fabricated using qualitative stainless steel. Used in diverse industrial applications, our ovens can made tailored as per the requirements of our clients.   Specifications of vacuum oven • Double walled. • Inside chamber constructed with thick stainless steel 304 Quality. • Out side chamber manufactured with mild steel sheet pre greased, pretreated and powder coated for rust proofing. • Proper glass wool insulation between the chambers to prevent heat loss. • Operating temperature ranges from 50°C to 200"C with -2°C accuracy. Uniform drying through vacuum. • Precise Vacuum control upto 30Hg, which are displayed on Analog gauge. • For quick and uniform heating, the vacuum chamber is fiited with set of high quality heaters. • Digital temp indicator cum controller helps in controlling the temperature. • The Door has a thick tempered toughened glass window and is properly sealed with silicon rubber gasket for observation without disturbing thermal condition. • Control panel on the front panel, with temperature controller, switches and indicating lamps.    

We offer flat belt conveyorised oven, which is an electrically heated conveyor oven. These consist of various zones in where in same temperature can be provided in the zones along the path of the belt. Control panels are provide on each zone and also a common control panel can be provided as per the client's requirement Fansblowers are incorporated in each zone for air circulation and uniform temperature Products are places on the belt on loading side of the oven & unloaded from the other side

• Type: Electric oven
• Color: white
• Size: 24"x24"
• Model Name/Number: APS-EIHAO-24
• Heating Media: Air
• Usage/Application: Industrial
• Max Temperature: 250 C
• No of Chamber: One

S. S. Round or rectangular interior for better space utilisation. Door with toughened glass window. Temp. Range: 5°c above ambient to 130° or 200° c. Temp. Control: thermostatic or electronic digital type. Vacuum upto 760 mm of hg. With vacuum gauge. Available in various sizes

• Type: Uv Curing Equipment
• Application: Industrial
• Color: White
• Voltage: 220 V
• Condition: New
• Frequency: 50 Hz
• Phase: Single Phase

3Dware's UV Oven is used to cure Jewellery cam pieces in just 2 minutes. Push button door with a sliding tray helps the easy movement of delicate parts inside the oven. Automatic stopwatch helps to prevent overcuring of the parts.

FORCED CONVECTION OVEN, Crucible Furnace, Humidifier, Vacuum Pump Oil Sealed

industrial electric ovens, Chimney, Kitchen Hobs, Microwave, Kitchen Sink

industrial electric ovens

Furnaces, Lpg Gas System

Halar Coating Oven, Liquid Spray Booth

IR Booster Ovens, Water Immersion Heaters, infrared ovens, tunnel ovens

Ovens, photopolymer plates

holding cabinets, Bakery Cabinet, Back Bar Cooler, water disinfection system