Oxygen Therapy Equipment Dealers in Worli, Mumbai

• Feature: The MSV has a field adjustable seal, with stainless steel scraper for extended service life.

The Multiport Selector Valve (MSV) is an engineering device that provides a cost effective and compactmeans to improve production management and well optimization. The EXACTA MSVallows the diversion of fluids from a single flow line to a test outlet or a sampling device. A single MSV can manifold as many as seven flow lines through it simultaneously. While one inlet is isolated, the flow from the other six is combined into a separate group outlet.This unique flow selector can be used in a variety of oil and gas or process applicationseither as a standalone device or with a multiphase meter. The MSV can alsobe used for water injection for Enhanced Oil Recovery (EOR) projects. It providescontrol simplicity in an environment where size, weight and reliability are all keyfactors. The EXACTA Multiport Selector VALVE reduces the costs of installation, operation andmaintenance of the well test system throughout its life cycle.One single MSV can be used as replacement of an entire arrangement of 2 or 3 way valves for a test well Selecting system, functioning as a compact manifold providing an easy and safe way to select the wells you wish to connect to the Multiphase meter or to the test Separator.

Nasal Oxygen Cannula is used for efcient administration of oxygen for greater comfort of patient. Twin Nasal Tips provide maximum freedom to the patient and leaves the mouth free. Nasal Tips ensures equal volume of oxygen to both air passage. Manufactured from soft non toxic, medical grade PVC Compound. Multichannel tube ensure regular supply of oxygen if tube is accidently kinked. Proximal end of tube provided with connecter for easy connection with oxygen source. Packing– Non-Sterile, individually packed in a polybag.– Master Carton of 100.– Gross weight: 6.00kg– Master Carton size: 520 x 240 x 230mm

Oxygen Mask is used for convenient oxygen administration. Manufactured from soft non toxic, medical grade PVC Compound. Elastic strap and Aluminum nose clip is provided on the Mask for proper adjustment of Mask on nasal area. Multichannel tube ensure regular supply of oxygen if tube is accidently kinked. Tube is provided with connecters at both ends for easy connection with oxygen source. Packing– Non-Sterile, individually packed in a polybag.– Master Carton of 100.– Gross weight: 6.00kg– Master Carton size: 520 x 240 x 230mm

The Liquid Oxygen Pump is a single acting piston pump. It is used for filling Oxygen into Cylinders upto a pressure of 165 kgs./cm2. The drive unit is similar to any reciprocating machine with the Crank Shaft, Flywheel, Connecting Rod, Cross Head, etc.The pump is designed for assembly in air separation unit that works by pumping liquid Oxygen and gasifying the same in Heat Exchangers for final filling as gas in Cylinders. Control of liquid feed is not necessary, because the pump is designed in accordance with the plant size and the liquid produced is constantly pumped off. The Liquid Oxygen Pump consists of a stainless steel inside liner with liquid inlet and evaporated gas outlet ports. There are no valves on these ports, which are closed by the piston itself on the pressure stroke. The third outlet is the main discharge outlet with the two non-return ball valves. The two ball valves remain firmly closed during suction stroke, due to high pressure in partly filled cylinders. To ensure that these valves are fully closed, a positive pressure of about 60 kgs/cms2 must be maintained on it. When a fresh batch of cylinders is taken for filling, open the manifold valve slowly or use a spare batch of cylinders to ensure positive pressure on these valves.

Oxygen Mask is used for convenient oxygen administration. Manufactured from soft non toxic, medical grade PVC Compound. Elastic strap and Aluminum nose clip is provided on the Mask for proper adjustment of Mask on nasal area. Multichannel tube ensure regular supply of oxygen if tube is accidently kinked. Tube is provided with connecters at both ends for easy connection with oxygen source. Packing– Non-Sterile, individually packed in a polybag.– Master Carton of 100.– Gross weight: 6.00kg– Master Carton size: 520 x 240 x 230m

• Size: 11/2" / 2" - SCH40 / SCH80
• M.O.C: SS316 / SS304 / CS
• Distribution Ports: Size -¼" / ½" , Ports - 6 / 8 / 10 / 12 / 16

We offer Air Headers that replace many unit valve assemblies that normally operate from one source. The Air Headers are suitable for use with a variety of outlet take-off valves. The inlet-connection can be screw-able. The drain-valve of the system is at the manifold exit and the manifolds can be supplied with a bracket or U clamp for ease of wall mounting.

The Liquid Oxygen Pump is a single acting piston pump. It is used for filling Oxygen into Cylinders upto a pressure of 165 kgs./cm2. SANGHI - ORG Liquid Oxygen Pump The pump is designed for assembly in air separation unit that works by pumping liquid Oxygen and gasifying the same in Heat Exchangers for final filling as gas in Cylinders. Control of liquid feed is not necessary, because the pump is designed in accordance with the plant size and the liquid produced is constantly pumped off. The drive unit is similar to any reciprocating machine with the Crank Shaft, Flywheel, Connecting Rod, Cross Head, etc. The Liquid Oxygen Pump consists of a stainless steel inside liner with liquid inlet and evaporated gas outlet ports. There are no valves on these ports, which are closed by the piston itself on the pressure stroke. The third outlet is the main discharge outlet with the two non-return ball valves. The two ball valves remain firmly closed during suction stroke, due to high pressure in partly filled cylinders. To ensure that these valves are fully closed, a positive pressure of about 60 kgs/cms2 must be maintained on it. When a fresh batch of cylinders is taken for filling, open the manifold valve slowly or use a spare batch of cylinders to ensure positive pressure on these valves.  

• Country of Origin: Made in India
• Tube Length: 210 Cm
• Patient Type: Paediatric, Neonatal, Adult
• Cannula Prolong Style: Curved Prong
• Application: Hospital
• Brand Name: Romsons
• Automation Grade: Manual

• Patient Type: Paediatric, Neonatal, Adult
• Cannula Prolong Style: Curved Prong
• Tube Length: 210 cm
• Brand Name: Romsons
• Country of Origin: Made in India
• Usage/Application: Hospital
• Grade: Manufactured from soft,light weight non toxic material.
• Automation Grade: Manual

We are the manufacturer of air header 8 way ,stainless steel 1" flange connection ,14" ball valve npt female,.

Air Header or Air Manifolds act as a distribution manifolds that provides users with many connection options for isolation manifolds. We offer Air Distribution Headers, which can be used with various outlet-take-off valves. This Air Distribution Header is a very efficient machine to replace many unit valve assemblies, operating from one source. This Air Distribution Header is provided with screw- able inlet connection FAV Air Header are available in a wide array of configurations based on end users requirement such as NPT, BSP, Butt Weld, Flanged, Socket Weld or Compression outlets. Air Headers are used to supply several users with instrument air. Besides multiple types of standard styles we also supply the Air Headers in accordance with specific customer demands.Selection can be made from a comprehensive range of pipe styles with a variety of connections and material options, optimizing installation and access opportunities.Air Headers is a substitute for multiple valve assemblies, which normally operates from one originating point. The Air Manifolds are configured for accommodating various outlet valves. The inlet-connection can have variety of end connection.We supply all the accessories along with Air Headers which include Instrument Valves including Ball valves and Needle valves, Tube Fittings, Couplings, Instrument Pipe Fitting or any other connections based on customers’ requirements. Air Header are fabricated from bar stock which are customized based on customers drawings. We also provide special coating like Zink coating; Hot dipped galvanizing coating, Epoxy coating, Silver coating.The most widely material used Air Header or Air Manifolds s are SS 316 Needle Valves .They is also available in Stainless Steel, Brass, Steel, Monel, High Duty Bronze, and Hastelloy FAV Air Header has been specifically designed for use on instrumentation, process and control systems, together with equipment employed in oil and gas, marine and shipping, chemical, chromatography, petroleum.  

Aegis Autogas are exclusive world-class imported Auto LPG stations, Present across 10+ states of India & expanding with its specialized in-house dedicated team of experienced maintenance engineers who ensure best services are provided in real time, always Achieve Faster Project Break Even with Aegis Autogas

Oxygen Regulator, valve repair, Hydrocarbon Trap, Molecular Sieve

medical humidifier bottle, Medical Gas Pipeline, Medical Oxygen Concentrator

3 ply mask., 3 ply mask, n95 mask

medical oxygen regulator

Purge Systems for hazardous location, Cabinet Type Air Conditioners

gas filling machine, Organic Solid Waste Odour Control Misting System

medical oxygen regulator, Stadiometer, Manual Pulse Generator