Oxygen Therapy Equipment Dealers in Mumbai

Applicable gas                      :Oxygen Max.Inlet pressure (kg/cm2)  :150 Max.Outlet pressure (kg/cm2) : 12.5 Rate of flow (m3/h)                : 40 Inlet connection                     : G5/8″ Outlet connection                   : G3/8″

• Country of Origin: India
• Type: Air Headers
• Material: Carbon Steel, Stainless Steel

Air Header or Air Manifolds act as a distribution manifold that provides users with many connection options for isolation manifolds. Instrumxx offers Air Distribution Headers, which can be used with various outlet-take-off valves. This Air Distribution Header is a very efficient machine to replace many unit valve assemblies, operating from one source. Instrumxx Air Headers are available in a wide array of configurations based on end users requirements such as NPT, BSP, Butt Weld, Flanged, Socket Weld or Compression outlets. In the simplest terms, an air manifold allows you to connect multiple hoses to a central point on your worksite. It creates a junction box for using multiple tools on the same compressor without needing to run a separate line for each tool. There are various size manifolds equipped with multiple ports to run multiple tools. What are the advantages of an Air Header? They Offer Customized Compact design Multiple Valve inlets and Outlets save on Cost Variety of end connections Every Air Header is factory tested How Is It Used? It is a unit mainly used to distribute & control compressed Air from one Inlet to Multiple Outlets for use in plants or facilities. It is most commonly used for distribution of Instrument compressed Air within the plant for various utilities. Air HeaderSpecification Material of Construction (MOC): Stainless Steel, Carbon Steel, Hot Dip Galvanize Carbon Steel. Description Header Pipe: Air Header Pipe constructed from Seamless Pipe, size 1-1/2" & 2" NB schedule 40 and 80. Caps or Reducers welded to the pipe is manufactured from forge material. Inlet Connection: Flange or three piece union type connection. Outlet Connection: 4, 6, 8, 10, 12, 16, 18 or as per customer requirement. This outlet Connection are provided with IXX make Ball or Needle Valve of 1/4", 3/8", 1/2" sizes. Nipple used for all the above connections are manufactured from seamless pipe. Drain Connection: 1/2" or 1" Ball Valve ,Needle Valve, Gate Valve, Globe Valve as per customer requirement. Mounting: Bracket can be provide as option. Testing: Air Headers are tested at 150 PSI Pneumatically and 1000 PSI Hydraulically.  

With a brightly painted panel and world-class design our front loading double lock outlet (vaccum) is highly demanded by the healthcare sector. We provide front loading double lock outlet (vacuum) for the national as well as international markets.

• Sizes: 1-1/2" | 2"
• Brand Name: IXX
• Material: Stainless Steel | Carbon Steel | Alloy Steel | Haste alloy | Duplex | Super Duplex | Monel | Inconel
• Condition: New
• Size: 1-1/2" | 2"
• Certification: ISO 9001:2008
• Packaging Type: HDPE BOX | Corrugated Box | Wooden Box
• Type: Air Headers
• Country of Origin: India

We are a leading Manufacturer , Exporter and Stockist Of Stainless Steel Air Header In India.We also Offer Ready Stock of Stainless Steel Air Header in various sizes.These above products are available in the following Material & Grades:Stainless Steel Grades: 304 | 304L | 316 | 316L | 316TI | 321 | 347H | 310S | 317L | 904LCarbon Steel A106 Gr. B, A105 & Alloy Steel P1, P11, P12 & P22Alloy Steel, Hastelloy C22 & Hastelloy C-276.Monel 400 & Monel K-500Inconel 600, Inconel 601, Inconel 625, Inconel 750 & Inconel 825Titanium Gr.1, Titanium Gr.2, Titanium Gr.5,Duplex Stainless Steel & Super Duplex

• Inlet: DIN & ANSI ½” / 1” NB Flanged / Threaded Connections.
• Main Pipe: 1”, 1-½”, 2” NB SCH 40 / 80 / 160/ XXS, Seamless
• Outlet ports: 4way / 6way / 8way / 12way / 16way (Staggering or straight, Single sided or Double sided)
• Ports Size: ¼” - ½” NB SCH 40 / 80 / 160/ XXS Nipple TOE.
• Valves: Fitted on outlet ports ¼” / ½” SS or Brass or A 105 Needle Valves / SS Ball Valves  (Full or Reduced Port)
• Drain: ½” SCH SCH 40 / 80 / 160/ XXS Nipple TOE fitted with SS Ball Valve & Drain plug.
• Pressure Test: 150 psi. Pneumatic
• M.O.C: SS, CS, Alloy Steel, Monel etc.
• Mounting: Wall or Rack Mounting or ‘U’ clamps.

• Size: Small
• Type: Pedia.
• Material: PVC
• Application: Clinical Use, Hospital Use
• Color: Clear, Transparent
• Pattern: Plain
• Packaging Type: Paper Boxes
• Properties: Medical Materials
• Packing: Non Sterile Individually Packed. Master Carton of 120.

Details : Moulded face mask manufactured from non-toxic, non irritant medical grade PVC.  Non-return valves provided at inhale and exhale point, prevent carbon dioxide retention.  600m1 light weight reservoir bag improves the oxygen efficiency and patient comfort.  Multichannel tube provided to ensures continuous flow of oxygen. 

• Material: SS316,304,Inconel, Monel
• Pressure: 6000PSI

three valve manifold [t type] hi-pressure instrumentation valves fittings & hydro pneumatic accessories.

• Material: Plastic
• Application: Clinic, Hospital
• Application: Anesthesia, Oxygen Supply
• Color: Transparent.
• Feature: Adjustable, Comfortable, Easy To Wear, Provide Artificial Respiration
• Pattern: Elastic Headloop

Oxygen Masks are used to transfer medication, including oxygen, and asthma medication to the trachea and lungs of a patient. There are two types of oxygen masks; Oral Nasal Masks which cover the nose and mouth and Full Face Masks which cover the whole face.   Both types should only be used when ordered by a doctor or medical care provider, and can be used within the hospital, clinics or at home when necessary.   The oxygen masks for hospital and clinical usage are usually made of Polyvinyl Chloride (PVC) as this material is cheap and disposable. The plastic material allows the oxygen masks to be transparent which limits the sensation of claustrophobia in some patients, and also allows the medical care provider to assess the patient’s face. The oxygen or supply of medication is either connected via tubing or comes in a breathing bag/cup which is attached to the mask itself. The latter allows for deep breathing without wasting oxygen or medication.   Oxygen Masks are used within oxygen therapy when a patient needs a higher concentration of oxygen than is present in the environment naturally. The oxygen masks transfer oxygen gas from a storage tank or breathing bag to the lungs, and can be used for several chronic and acute conditions including chronic obstructive pulmonary disease (COPD), cardiac failure, emergency operations, major trauma, hypothermia and convulsions.   An oxygen mask must always be used with the close monitor of a doctor or medical care provider.

• Power Source: Electric

Positioning in the Plant : Oxygen filling manifold is the final stage where cylinder rack is set for final filling. The pressurized oxygen is controlled by pressure gauges & manifold valves. Primary Function : High Pressure Oxygen Pumped by L.O.Pump passes through Heat Exchangers converts into gaseous form. The gaseous oxygen if filled through oxygen filing manifold in the cylinders ready for marketing. Spares Requirement : Some of its important items spares are listed below:-   Cylinder Valves S.S. Spindles Spindle Keys Manifold Valves Safety valves Pressure Gauges Copper Tubes for Pig Tail Connection Brass Bull Nose & Nuts Spares Requirement : Square Nut and Bull Nose – extruded brass material is used. The material constitution enhances the threading of the nut which gets damaged with continuos workability. SS Spindle – SS 304 material improves the life of the valve as the valve is operated for each filling batch. Manifold valve is made from forged body tested with working pressure of 165 kg/cm2 and tested pressure of 200 kg/cm2. Pressure gauge 6” size are supplied brass as well as SS bordoun for 420kg/cm2 presssure. Safety valve are made in carbon steel with SS seat and working part. The safety valve supplied is approved by the explosive department .The working presssure are 165 kg/cm2 – 20 X 25mm size.

• Size: ADULT/PEADITRIC
• Product Name: OXYGEN MASK KIT
• MOQ: 5000

oxygen mask kit - pvc clear oxygen mask with pvc star lumen pvc tubing - 2mtrs with 2 end connector. adjustable aluminium nose clip and elastic head strap.

• Type: Anaesthesia
• Color: Transparent, Black
• Material: Silicone, Rubber
• Usage: Hospital
• Hook Ring: Yes
• Max Size: 5 - 6 Inch

• Tube Length: 2 m
• Material: Plastic, Silicon
• Features: Fine finish, Easy to use
• Usage/Application: Hospital, Clinical
• Brand: Medi Electronics
• Packaging Type: Packet

We are one of the reliable Manufacturers, Exporters and Suppliers of Silicone Mask in Mumbai, Maharashtra. Our Industrial Rubber Mask is manufactured using latex free material to ensure superior quality. Mask that we offer can be reused and easy to clean. We make available Silicone Mask with different specifications as per the requirement of buyers. Our mask can also be used with bag-valve ventilation devices. We provide Silicone Mask at reasonable price.   Features : The Silicone mask has one-way valve with filter to protect rescuers in an emergency. It prevents direct contact with a patient's mouth, nose and face and overcomes hesitation to start resuscitation. Transparent dome allows rescuer to visually check patient's lip color and vomit. Oxygen inlet (optional) facilitates increased oxygen delivery to patient. The mask is reusable and easy to clean, the one way valve is exchanged after use. The mask may be used with the bag-valve mask ventilation devices. After detaching the valve/filter assembly, the mask can be attached to the resuscitator device. The Silicone mask's material conform to the requirement ISO 10993-5 and ISO 10993-10.

Oxygen Flowmeter with Rotameter and Humidifier bottle

We are engaged in fulfilling the requirement of Gas Manifold by various industries. Our Gas Manifold has garnered widespread acclaim for its sturdy construction and efficient performance. We package the Gas Manifold in durable material so that there is no risk of damage during transit throughout country. That is why we are a celebrated Manufacturer and Supplier of Gas Manifold from Mumbai, Maharashtra.

• Usage: Hospital, Clinic
• Display: Analog
• Usage/Application: Gas
• Flow Range: 1-15L/min
• Output Pressure: 0.2-0.3Mpa
• Gas Type: Oxygen

• Country of Origin: Made in India
• Tube Length: 210 Cm
• Patient Type: Paediatric, Neonatal, Adult
• Cannula Prolong Style: Curved Prong
• Application: Hospital
• Brand Name: Romsons
• Automation Grade: Manual

• Material: Silicone
• Color: White
• Application: Laboratory
• Shape: Round
• Pack Type: Box