Paper Testing Equipments Dealers in Mumbai

• Power Pack: Solenoid operated D. C. V., 12.5 HP motor, Hydraulic pump, Pressure gauge , Hose pipes, Water cooler
• Press Body: M.S. fabricated to withstand 15 Ton Max. load exerted by cylinder
• Stroke Counter: Proximity switch & display stroke counter
• Cycle on: Two proximity switches to control stroke length

The main purpose of Endurance Testing Machine is to test Leaf spring Assemblies for giving continuous jerks for the specified number of cycle for e.g. One Hundred Thousand strokes or more. This test gives us feedback on the life of leaf spring material, spring properties like camber and reduction in load bearing properties. We can also plot graph of load v/s deflection of the assembly by taking note of the load cell reading in kilos & the deflection reading in mm on the scale provided.

We are the leading Manufacturer, Supplier, Wholesaler and Association of Colour Fastness Testing Instruments, Laboratory Equipment, and Yarn Testing Equipment. Also offering Textile Testing Machines, GSM Cutter, Fabric Stiffness Tester, Crease Recovery Tester, Beesley Balance, Button Snap Pullout Tester, Perspiration Tester, MBTL Light Fastness Tester, Lab Equipments, Yarn Testing Instruments, Water Analysis Instruments, Electronic Balances, Simple

• Size: 10x10 Cm., 10x20 Cm., 25x25 Cm
• Type: Grammage Tester
• Weight: 0-6 Kg
• Condition: New
• Application: Fabric Testing, Paper Testing
• Capacity: 0-200 Gm
• Feature: Accuracy

It is used for measuring the basis weight GSM of paper and other sheet materials by weighing a small test sample with given dimensions. The GSM readings of the specimen display directly on screen. Suitable for different size of paper 10 x10, 10 x 20, 20 x25, 25x25, 25 x 40 cm. Auto zero adjustment with printer port & RS 232C. Measuring range : Maximum 0-1500 GSM with template size 10x10   Accuracy : 0.1 GSMh  

Protective ground tester indispensable for safety standard certification Low resistance 0 to 1.8 Ω measurements Max. 31A testing current

We are offering product is a cationic polymer and improves ply bond and stiffness of duplex board. the product is to be added @ 2.0 kg per ton of pulp in wet end. besides this it also improves drainage on the machine.

INTRODUCTION With this machine, a pliable specimen is placed under a constant tension load. The specimen is then folded to an angle of 135° in either direction, at the rate of 175 double folds per minute until the specimen is severed at the crease. A variable folding rate option allows the operator to vary the folding rate between 20 and 175 double folds per minute. Three Models to Meet Your Requirements Model 1 - Paper For paper, leather, fine wire and other pliable materials with comparatively low elongation characteristics. This machine accepts standard 14 cm long by 15 mm wide specimens. Holding jaws are available that will accept specimens varying in thickness from 0.01 to 0.07 in. Jaw size(s) required should be stated when ordering. The optional centrifugal exhaust fan draws conditioned room air across the specimen and the head to accurately control the temperature and humidity in the fold area in accordance with TAPPI Method T 511 and ASTM D 2176. Model 2 - Plastics For plastics and other materials with relatively high amounts of elongation, this machine provides the same operating principles and holding jaw options as the Model 1, however, the loading system has been modified to automatically compensate for specimen elongation up to 100% on a 1 inch gage length. Loads of any desired magnitude from ½ lb. to 5 lb. in increments of ½ lb. can be applied with full assurance of uniformity throughout the test. Model 3 - Combination Paper and Plastics Tester. For maximum flexibility in testing both paper and plastic specimens, this versatile folding endurance tester incorporates the features and capacities of both Models 1 and 2, as described above, in a single unit.

instrumental in manufacture, supply and export of quality tested Paper and Packaging Testing Instruments . These Paper and Packaging Testing Instruments are used to assess the different properties, durability and reliability of paper and related items. The different Paper and Packaging Testing Instruments offered by us include Bursting Strength Tester, Cobb Sizing Tester and Box Compression Tester.

• Length: 750 mm
• Width: 400 mm
• Height: 500 mm

The Internal Bond is used to determine the internal bond strength of variety of paper & paper board material. Application: Paper and Paper bonds are subjected to impulse,impacts and shock loads into or out of plane of the sheet.This can cause structural failures. Test results from this test system may correlate to product failures. The test is conducted on a sandwich formed by double coated tape, paper specimen and again double coated tape. This sandwich is pressed between a flat metal anvi and an aluminum platen. A pendulum impacts on top inside of vertical face of aluminum platen – causing it to displace and thereby split paper specimen. The energy absorbed in rupturing of the sample in computed by measuring the peak of the pendulum swing. Suitable for testing as per following Standard: TAPPI: T 569 on 07   Features:   Parallel Centronix Port to connect it to your 80 column dot matrix printer to print stored test results. Models:   UIBST - Ubique Internal Bond Scott Type Tester with microprocessor based digital model.

Our organization is engaged in offering Peel Tester, which is manufactured in strict compliance with the set industry norms. Used to check the adhesive strength between two samples, these testers are offered in different load capacities, speeds and cross travel. The testers are known for providing accurate results and have high functionality. We provide this Peel Tester to our clients at very competitive prices and also provide services for it. Features High accuracyGreat after sale servicesReasonable price with high qualityHigh precision controlEasy to operate and handle

• Earth Ground Resistance: 20/200/2000 ohm
• Usage: Industrial
• Weight: 750 g
• Dimension: 165 x 50 x 95 mm
• Storage Temp Range: 0-50DegC

We are the leading exporter and supplier of this products.

• Frequency: 50/60 Hz
• Voltage: 220-230 V AC
• Country of Origin: Made in India
• Features: Large Working Area, Flexible and Accurate Load measurement, Simple plug and use, Ergonomically designed, PC integration.
• Brand: Lloyds
• Capacity: 20 kgf
• Testing Speed: 15 mm/min Fixed
• Speed Accuracy: Less Than 0.2%
• Load Cell Accuracy: +/- 0.5% of readings
• Digital Functions: Tare, Peak, Calibration
• Data Sampling Rate: 500 hz
• Output: Rs 232 Serial Data
• Model Name: DBST 92N

• Material: MILD STEEL, Stainless Steel
• Application: Fabric Testing, Paper Testing
• Packaging Type: Box, Corrugated Box
• Condition: New, Used
• Color: Metallic, Silver, Grey
• Battery Charger: 220 V

We offer Peel Strength Tester to customers worldwide. This instrument is widely used in packaging industries for testing adhesive tapes, gums etc. Our Peel Strength Tester is designed for quick and reliable tensile, peel, bending, compression, shear and fatigue cycling on metals, composites, alloys and many more finished products. Customers can avail our Peel Strength Tester at market leading prices. We are Peel Strength Tester Manufacturer, Exporter and Supplier in Mumbai, Maharashtra.   Details : It is designed to pull the adhesive strip over the steel strip or any other rigid strip, at a constant speed without any jerks Direction of the pulling force is kept at 90-180 degree to separate adhesive strip The required load is directly indicated by digital display in grams The maximum load locking arrangement is provided to the display Top grip is provided to hold steel strip, as well as flexible strip over which adhesive strip is pasted The bottom grip is provided to hold adhesive flexible strip which pull by way of motorize rotating mechanism at constant speed

• Power: 230 Volts, 50 Hz, single phase.
• Load capacity: Up to 5 kg.*
• No. of load cell: One.
• Cross Travel: Up to 250 mm*
• Speed: 300 mm/minute.
• Direct display: Peak load.
• Paint: Powder coated.

As well as the compression systems, the company manufactures and distributes a large quantity of measuring equipment and quality control testing for corrugated cardboard, paper and pulp, more descriptions can be found in our catalogue.

• Clear Distance: Maximum up to 250 mm.
• Resolution: 1 gram

For paper & Corrugated Board – Manual Clamping through rotation of wheel handle, automatic pressure & standard pressure gauges range : 0–7, 0-10, 0-35, 0-40 kgcm2.