Pasco Steel Company Ballard Estate, Mumbai, Maharashtra

Stainless steel capillary tubes Pasco Steel India operates according to an certified quality programme. A complete range of testing facilities on-site contributes to consistent quality control.energy industries, EPC and Pipes for General Engineering Purpose.

Length : As for your requirement

ASTM A335 Chrome Moly Pipe ASTM A335 Pipe (ASME S/A335, Chorme-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding.  Sometimes referred to as “P Grade”, chome moly pipe is popular in P-Grades P5, P9, P11, P22, and P91.  The most common use of grades P11, P22, and P91 is in the power industry and petro-chemical plants,  Grades P5 and P9 are commonly used  in refineries.  A335 is often called chrome moly pipe because of the chemical makeup of Molybdenum (Mo) and Chromium (Cr). Molybdenum increases the strength of steel as well as the elastic limit, resistance to wear, impact qualities, and hardenability.  Moly increases the resistance to softening, restrains grain growth and makes chromium steel less susceptible to embrittlement.  Moly is the most effective single additive that increases high temperature creep strength.  It also enhances the corrosion resistance of steel, and inhibits pitting.  Chromium (or chrome) is the essential constituent of stainless steel.  Any steel with 12% or more Chrome is considered stainless.  Chrome is virtually irreplaceable in resisting oxidation at elevated temperatures. Chrome raises the tensile, yield, and hardness at room temperatures.  The composition chrome moly alloy steel pipe make it ideal for use in power plants, refineries, petro chemical plants, and oil field services where fluids and gases are transported at extremely high temperatures and pressures.   Allied Pipelines India stocks a full range of the following A335 pipe grades:  Grades: P-5, P-9, P-11, P-22, and P-91 Sizes NPS 1/4'' to NPS 48''  Wall Thickness - Schedules 40 through 160, STD, XS, XXS.  Unscheduled heavy wall pipe thicknesses available up to 4 inches. 

ASTM A335 Seamless Pipes   Astm A335/ASTM A213/astm a213 t9 pipes/ASTM A333/ASTM A334/ alloy pipe/seamless Pipe/seamless Tube/alloy Steel Pipe/p91 alloy pipes/p5.grade p91/alloy steel pipe/heat exchanger pipe/boiler pipe/a335p22a335p22 alloy pipe/ alloy seamless pipe  seamless alloy steel pipe Standard: ASTM (ASME)  Grades: T91, P91, P11, TP309S, TP310S, P2, T2,  P12, T12, P22, T22, P5, T5, TP347H, TP347  Outer diameter: 25mm to 1800mm  Wall Thickness: 1.5mm to 60mm  Length: Max. 18m  We also produce other specifications according to customers' requirements  Foreign standards implemented: DIN, JIS, ASTM (ASME)   ASTM A335 GR P5 | GR P9 | GR P11 | GR P22 | GR P91.   Alloy Steel Seamless Pipes (IBR APPROVED)   Alloy Steel Seamless Pipes (IBR) offered by us is made of alloy steel and feature exceptional performance properties. These are developed for energy-related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts. Further, Alloy Steel Tubes are also used in domestic, professional or industrial areas.   Alloy Steel Seamless Pipes (ASME SA335 Grade P5) Alloy Steel Seamless Pipes (ASME SA335 Grade P5) offered by us are made available in ASME SA335 as well as P1, P5, P9, P11, P12, P91 grades. Our expertise lies in offering these in different sizes & schedules, with IBR & latest edition NACE MR 0175 reports.   Alloy Steel Pipes (ASTM A335 P11) Alloy Steel Pipes (ASTM A335 P11) offered by us are made as per IBR standards and are used mainly for boiler operations. We source these seamless pipes in varied size range. Further, we can also get these customized as per boiler piping requirements. For ensuring in them optimum quality standards, we source these from quality manufacturers. We also offer clients of having their own mark on them.   Alloy Steel Pipes (ASTM A335 P12) Alloy Steel Pipes (ASTM A335 P12) offered by us are available with ASTM A335 P12 standard and finds application in industries like Petrochemicals, Refineries, Fertilizers, Pharmaceuticals and others. We can source these seamless pipes in size range of up to 26 inches. Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) offered by us are made available in ASTM A335 Grades. Made as per IBR standards, these are mainly used in boiler operations. Further, our expertise lies in offering these pipes in various size range as well as in customized parameters as per boiler piping requirements. Sourced from quality conscious manufacturers, we also offer our clients the option of adding their own mark on them. Alloy Steel Tubes (ASME SA213 Grade T11) Alloy Steel Tubes (ASME SA213 Grade T11) manufactured and supplied by us are of ASME SA213 Grade. Our expertise lies in offering these in various sizes as well as other specifications as per the required demands. These Alloy Steel Tubes find usage mainly in different industrial applications.   ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) manufactured, supplied and exported by us are used for various industrial applications. Our specialization in offering precision engineered alloy steels allow us to deliver these for various engineering applications in various grades like A-387 GR. P1, P5, P9, P11, P12, P22, P91, ASTM A-335 and others. The other specifications include: ASTM A335 PIPES | ASTM A335 GR P5 PIPES | ASTM A335 GR P9 PIPES | ASTM A335 GR P11 PIPES | ASTM A335 GR P22 PIPES | ASTM A335 GR P91 PIPES Size Range: 1/8" - 26" Schedules: 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH   ASTM A335 GR P5 | GR P9 | GR P11 | GR P22 | GR P91. Alloy Steel Seamless Pipes (IBR APPROVED) Alloy Steel Seamless Pipes (IBR) offered by us is made of alloy steel and feature exceptional performance properties. These are developed for energy-related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts. Further, Alloy Steel Tubes are also used in domestic, professional or industrial areas. Alloy Steel Seamless Pipes (ASME SA335 Grade P5) Alloy Steel Seamless Pipes (ASME SA335 Grade P5) offered by us are made available in ASME SA335 as well as P1, P5, P9, P11, P12, P91 grades. Our expertise lies in offering these in different sizes & schedules, with IBR & latest edition NACE MR 0175 reports. Alloy Steel Pipes (ASTM A335 P11) Alloy Steel Pipes (ASTM A335 P11) offered by us are made as per IBR standards and are used mainly for boiler operations. We source these seamless pipes in varied size range. Further, we can also get these customized as per boiler piping requirements. For ensuring in them optimum quality standards, we source these from quality manufacturers. We also offer clients of having their own mark on them. Alloy Steel Pipes (ASTM A335 P12) Alloy Steel Pipes (ASTM A335 P12) offered by us are available with ASTM A335 P12 standard and finds application in industries like Petrochemicals, Refineries, Fertilizers, Pharmaceuticals and others. We can source these seamless pipes in size range of up to 26 inches. Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) offered by us are made available in ASTM A335 Grades. Made as per IBR standards, these are mainly used in boiler operations. Further, our expertise lies in offering these pipes in various size range as well as in customized parameters as per boiler piping requirements. Sourced from quality conscious manufacturers, we also offer our clients the option of adding their own mark on them. Alloy Steel Tubes (ASME SA213 Grade T11) Alloy Steel Tubes (ASME SA213 Grade T11) manufactured and supplied by us are of ASME SA213 Grade. Our expertise lies in offering these in various sizes as well as other specifications as per the required demands. These Alloy Steel Tubes find usage mainly in different industrial applications. ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) manufactured, supplied and exported by us are used for various industrial applications. Our specialization in offering precision engineered alloy steels allow us to deliver these for various engineering applications in various grades like A-387 GR. P1, P5, P9, P11, P12, P22, P91, ASTM A-335 and others. The other specifications include: ASTM A335 PIPES | ASTM A335 GR P5 PIPES | ASTM A335 GR P9 PIPES | ASTM A335 GR P11 PIPES | ASTM A335 GR P22 PIPES | ASTM A335 GR P91 PIPES Size Range: 1/8" - 26" Schedules: 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH Heat Treatment Requirements

Saw pipe of Three Roll Plate Bending Machine, Inside & Outside welding lines, Heat Treatment Furnace and all necessary Testing Equipment to produce high quality pipes conforming to various International Standards. These facilities are capable of manufacturing pipes in various grades.

ASTM A179 Cold Drawn Seamless Carbon Steel Tube for Condenser and Heat Exchangers We bring forth for our clients a quality assured range of tubes of ASTM A179 seamless tubes, that is used in heat exchangers and condensers. Offered in the grade of 179, these tubes are suitable for heat transfer applications because of their temperature withstanding capabilities. These ASTM A179 seamless tubes are produced using extrusion or rotary piercing which have been sourced from the reliable and certified vendors. Our ASTM A179 seamless tubes are used in sugar mills & distilleries, pumps and petrochemicals, cement and construction industries and steel plants. Features:  Dimensional accuracy.  High strength  Durable  Corrosion resistance  Fine finish Standard: ASTM A179 Seamless Tubes Description 1. Standards: ASTM A179 (ASME SA179) 2. Applications: heat exchangers, condensers, heat transfer equipment and similar pipes. 3. Grade: A 179 4. Specifications:     Diameter: 10.3 to 76.2 mm;     Thickness: 1.2 to 12 mm;     Length: 6 m and above;     Modified specifications according to customer requirements. 5. Chemical composition and mechanical properties.

This specification covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries. Wall Thickness available: Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk.   Additional Testing : NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc. Dimensions : All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.   Chemical Composition The composition of pipe furnished to this specification, as determined by heat analysis for pipe other than Grade X 80, shall conform to the chemical requirements specified in Table 2, except that by agreement between the purchaser and the manufacturer carbon contents higher than those specified may be used. the composition of intermediate grades(higher than X42)shall conform to chenical requirements agreed upon between the manufacturer and the purchaser, and such requirements shall be consistent with the requirements specified in Table 2 for the applicable type of pipe For Grades X42 and higher, by agreement between the purchaser and the manufacturer, element other than columbium, vanadium, and titanium may be used; however, caution should be exercised in determining the quantity that may be present for any particular size and thickness of pipe because the addition of such otherwise desirable elements may alter the weldability of the pipe. API 5L Line Pipe Physical Properties . Line pipe grade designations come from API Spec 5L Specification for Line Pipe. Standard Line Pipe has grade designation A and B. Stronger grades have the designation X followed by the specified minimum yield strength of the pipe steel, measured in kilopounds per square inch (abbreviated ksi), e.g. X60 for pipe having a minimum yield strength of 60 ksi. See the table below for the standard available grades.   1 -API 5L elongation figures vary with specimen dimensions. Values shown for 0.2 sq. in. specimen. Line pipe mechanical testing usually omits Reduction of Area (RA) measurement reporting, and Charpy V-Notch (CVN) testing. This prevents use of this pipe as body material above 36 ksi yield strength for API Spec 6A equipment without retesting for Reduction of Area, and in the case of low temperature service, Charpy V-Notch testing as well. API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe Packing API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipee packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage. Delivery: Within 10-25days or asap if we have enough stock

API 5L Carbon Steel Saw Pipes Submerged Arc Welded [SAW] Pipes Allied Pipelines India Carbon Steel SAW Pipe manufacturing facility consists of a JCO Press, Helical / Spiral Mills, number of Three Roll Plate Bending Machine, Inside & Outside welding lines, Heat Treatment Furnace and all necessary Testing Equipment to produce high quality pipes conforming to various International Standards. These facilities are capable of manufacturing pipes in various grades. The pipes are supplied according to appropriate standards as well as customer specifications in a large variety of steel grades and dimensions. Specific requirements on execution, tolerances, lengths, and mechanical & chemical properties are offered on request. Products Manufactured: Longitudinal Submerged Arc Welded [L-SAW] Pipes Helical / Spiral Submerged Arc Welded [H-SAW] Pipes Longitudinal with Circumferential Seam Submerged Arc Welded Pipes   1   Pipes can be supplied as per Customer Specification also. 2   Pipes up to 64” [1626 MM] can be manufactured with online or two step [offline]   welding system. Pipes above 64” [1626 MM] shall be manufactured with online   welding system. 3   For size above 100” [2540 MM] 100% Manual Ultrasonic Testing of weld shall be   carried instead of Hydro Test. 4   For size above 142” [3600 MM] 100% Manual Ultrasonic Testing of weld shall be   carried instead of Hydro Test. 5   Mobile Plant can be set-up near the site for manufacturing of pipes. Salient Features: Heat treatment facility up to 100" [2540 MM]. Capability to produce pipe having very close diameter-thickness ratio. Capability to manufacture pipes as per API 5L Grade X-80 or Equivalent. Capability to manufacture Alloy Steel Pipes. Application Industry: Oil and Gas Pipeline Cross Country Oil & Gas Pipelines Spur Lines City Gas Distribution Refinery & Petrochemical – High Temperature & Low Temperature Pipes Power Plant Cooling Water Line & Auxiliary Cooling Water Line Ash Handling Line Water & Sewerage Distribution and Transmission Lines for Irrigation Systems Pipes for Potable Water Drainage Pipes Structural Piling and Casing Pipes Structural Columns Other Industrial Pipes for Fertilizer Plant Mining Pipes Dredging Pipes Air Duct Piping High Mast Pipes for Wind Mill Towers

Allied Pipelines India is one of the leading manufacturers and exporters of API 5L X65 PSL 1/2 - API 5L X65 PSL1/2 Pipes PSL-1/PSL-2 Seamless, Carbon Steel API 5L X65 PSL1/2 Pipes, API 5L X65 PSL1/2 Pipes, premier suppliers of bulk CS API 5L X65 PSL1/2 Pipes stock worldwide   Fast delivery guaranteed for every size carbon steel API 5L X65 PSL1/2 Pipes, seamless API 5L X65 PSL1/2 Pipes, largest range of API 5L X65 PSL1/2 Pipes suppliers in India.   We are particularly proud to be renowned as a reliable and dynamic partner in design, manufacture and supply of API 5L X65 PSL1/2 Pipes, & we are keeping A Large Stock In India. We do production of API 5L X65 PSL1/2 Pipes for sale in Bahrain, UAE, Saudi Arabia, Oman, Kuwait, Lebanon, Egypt, Turkey, Qatar, India and many other countries.   Allied Pipelines India is a International professional manufacturer of API 5L X65 PSL1/2 Pipes and other Industrial materials. We supply all kind of API 5L X65 PSL1/2 Pipes & steel material for your projects within timeline to anywhere in the world, contact us now for request a quote. We always try our best to help our customers with the best products and service on the market.   Our Products : api seamless pipe, api welded pipe, x65 pipe, x70 pipe, x60 pipe, api pipe stock, api 5l x60 psl2, api 5l x65 psl2, api 5l x70 psl2, api pipe stockiest, api pipes, api 5l pipes, x60 psl2 pipe, x65 psl2 pipe, x70 psl2 pipe, api pipe stock, api welded pipe, api saw pipe, api steel pipe, api lsaw pipe, api dsaw pipe, api pipe, api psl2 pipe, api psl1 pipe, api pipe stockist, api pipes india, api pipe Singapore, api pipe stockist, x65 pipe, x60 pipe, x70 pipe, api jfe origin pipe, api sumitomo origin pipe WE EXPORT API SEAMLESS & WELDED PIPES TO : UAE, Dubai, Abu Dhabi, Jebel Ali, Sharjah, Germany, Iraq, USA, Singapore, Indonesia, Malaysia, Vietnam, Australia, Houston, Texas, Italy, Spain, Netherlands, Belgium, Taiwan, France, Polland, Thailand, India, Croatia, South Korea, Korea, North Korea The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries. Wall Thickness available: Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk.   Additional Testing : NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc. Dimensions : All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.   Chemical Composition The composition of pipe furnished to this specification, as determined by heat analysis for pipe other than Grade X 80, shall conform to the chemical requirements specified in Table 2, except that by agreement between the purchaser and the manufacturer carbon contents higher than those specified may be used. the composition of intermediate grades(higher than X42)shall conform to chenical requirements agreed upon between the manufacturer and the purchaser, and such requirements shall be consistent with the requirements specified in Table 2 for the applicable type of pipe For Grades X42 and higher, by agreement between the purchaser and the manufacturer, element other than columbium, vanadium, and titanium may be used; however, caution should be exercised in determining the quantity that may be present for any particular size and thickness of pipe because the addition of such otherwise desirable elements may alter the weldability of the pipe. API 5L Line Pipe Physical Properties . Line pipe grade designations come from API Spec 5L Specification for Line Pipe. Standard Line Pipe has grade designation A and B. Stronger grades have the designation X followed by the specified minimum yield strength of the pipe steel, measured in kilopounds per square inch (abbreviated ksi), e.g. X60 for pipe having a minimum yield strength of 60 ksi. See the table below for the standard available grades.1 -API 5L elongation figures vary with specimen dimensions. Values shown for 0.2 sq. in. specimen. Line pipe mechanical testing usually omits Reduction of Area (RA) measurement reporting, and Charpy V-Notch (CVN) testing. This prevents use of this pipe as body material above 36 ksi yield strength for API Spec 6A equipment without retesting for Reduction of Area, and in the case of low temperature service, Charpy V-Notch testing as well. API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe Packing API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipee packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage. Delivery: Within 10-25days or asap if we have enough stock

Carbon steel fittings is a growing manufacturing company in the field of carbon steel fittings and low temperature carbon steel fittings Like : . CS Socketweld Fitting CS Thread Fitting. In general, carbon steel pipe fittings are widely used for applications which do not require materials with higher resistance to corrosion such as stainless steel and nickel alloys. Carbon steel products corrode and get rusted easily if exposed to water.

Pasco Steel India operates according to an certified quality programme. A complete range of testing facilities on-site contributes to consistent quality control.

Alloy steel tubes wall seamless ferritic alloy-steel pipe intended for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice.

This specification covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe.