Passive Components Dealers in Mulund, Mumbai

HT unit: Capacitor units are manufactured in the range of 50KVAr to 1000KVAr & in the voltage range of 1 KV to 22KV. High voltage capacitor banks (3.3Kv to 132KV / 220KV) are formed by series parallel combinations of these units & connected in various formations of star / double star and delta, depending upon customer’s requirement / applications and applicable protection schemes. We have supplied hundreds of banks of ratings varying between 2-24 MVAr With similar capacitor units. Capacitors are type tested as per IEC / ISS (IS-13925) in CRPI (Govt of India), accredited by NABL Laboratory.

• Features: High Power to Size Ratio, High Temperature Resisting Hard Anodising Aluminium Housing.
• 25 Watts to 50 Watts: 0.1Ω to 10KΩ
• Standard ±5%. Closer Tolerances Available.: ±50ppm/°C to ±200ppm/°C
• 2000V a.c. for 1 Minute: >2000MΩ at 500V a.c.

Ramson Rheostats are famous for its quality and sturdiness

Neutral Grounding Reactors (NGRs) are used to control single line to ground faults only. NGR are particularly used at transmission voltage levels, when autotransformers with a delta tertiary are employed. Neutral Grounding Reactors (NGRs), normally installed between the transformer or generator neutral and ground, are effective in controlling single line to ground faults since, in general, the system short circuit impedance is largely reactive. NGRs reduce short circuit stresses on station transformers the most prevalent type of fault in an electrical system.

• Features: Corrosion resistant, Non PCB impregnated, Simple installation.

• Capacitor Type: Aluminium Electrolytic Capacitor
• Brand Name: Kevin
• Type: Aluminum Electrolytic Capacitor
• Application: Audio,fan,air Conditioner/motor,ht,power
• Power Source: Electric

Neutral Grounding Reactors (NGRs) are used to control single line to ground faults only. NGR are particularly used at transmission voltage levels, when autotransformers with a delta tertiary are employed. Neutral Grounding Reactors (NGRs), normally installed between the transformer or generator neutral and ground, are effective in controlling single line to ground faults since, in general, the system short circuit impedance is largely reactive. NGRs reduce short circuit stresses on station transformers the most prevalent type of fault in an electrical system. We have supplied 145KV neutral grounding reactors for 6 X 660MW at Lalitpur Thermal Power Projects through BIDCO & L&T for 220 KV, 765 KV switchyard installation. We have recently installed 145 KV Dry Type neutral grounding reactors at a power grid substation

Countless devices rely on printed electronics technologies for function, form and flexibility. Domex represents important brands in this sector and has a broad portfolio of silver, carbon, dielectric and clear conductive inks. Like most things in electronics, the majority of applications that incorporate printed electronics are getting finer in dimension and more complex in functionality. Henkel’s ability to formulate inks that address the demands of fine- line printing, while maintaining robust conductive and other functional properties, sets us apart from the competition, and has led to technology leadership within our comprehensive portfolio of inks for printed electronics.

DJ  STAGE AUDIO AMBILIFIERS.

• Type: Choke Inductor
• Color: Black, Brown, Grey, Light White, White
• Voltage: 110V, 220V, 230V, 380V, 440v, 450V
• Condition: New, Used
• Application: Industrial Use
• Power: 1-5kw, 10-15kw, 15-20kw, 20-25kw, 5-10kw
• Driven Type: Electric
• Phase: Double Phase, Single Phase, Tripple Phase
• Warranty: 1year, 2years
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Termination Style: Screw,Radial,Solder Lug,Axial,Flange
• Tolerance: 5 Percent
• Watts: 5 W
• Resistance: 22 ohm
• Applications: Electrical industries
• Dielectric Strength: 1000 V AC

• Type: Choke Inductor
• Color: Black, Brown, Grey, Light White
• Voltage: 110V, 220V, 230V, 380V, 450V
• Condition: New, Used
• Application: Industrial Use
• Power: 1-5kw, 10-15kw, 15-20kw, 20-25kw
• Driven Type: Electric
• Phase: Double Phase, Single Phase, Tripple Phase
• Warranty: 1year, 2years
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Material: Aluminium, Plastic
• Certification: CE Certified, ISI Certified
• Color: Blue, Grey, Metallic, Silver, White, Black
• Voltage: 0-100VDC, 100-200VDC, 200-400VDC, 400-800VDC
• Condition: New
• Frequency: 50Hz, 60Hz
• Driven Type: Electric
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance

High grade ceramic former. Copper nickel and Nickel chromium alloy wires and tapes used for winding. Self lubricating alloyed silver contact adjusted for optimum contact pressure. Creepage proof design. High grade silicon cement insulation.

chip inductors, Chip Schlocky Diodes, Chip Trimmer Capacitors

• Country of Origin: Made in India
• Application: Electronic
• Type: Ferrite bead
• Features: Long lasting, Dimensional accuracy, Compact design
• Packaging Type: Packet

• Frequency: 50 Hz / 60 Hz
• Duty: Continuous Heavy
• Temp class: -25/D (-25 + 55 Deg. Celsius)
• Max inrush current: 100 In
• Case Material: mild Steel

• Material: Metal
• Shape: Rectangular
• Voltage: 110V, 220V, 280V
• Material: Aluminium, Plastic
• Power Supply: 110V, 220V, 380V, 440V
• Phase: Single Phase
• Light Source: Electric

Silicone Cement Coated Tabular Resistors from the most compact and reliable type of unit possible for rating from 10 Watt to 500 Watt. They are mechanically robust, constant in Ohmic Value and withstand the most severe conditions of humidity.   Construction : Former : High Quality Ceramic Former, impervious to Moisture penetration and exceptional ability to withstand thermal shock.   Resistance Element :   High Quality iron free nickel chromium and cooper nickel wires are space wound on formers and the ends are silver brazed to the terminals.   Silicon Coating :   The Composition and method of application of the Silicon cement coating, exclusive developed and employed, is the real secret behind the outstanding performance of climatic conditions.

carbon film resistors, Screen Printer, Ink, adjustable motor, Boards

• Features: Cylindrical aluminum case, Over pressure device ,Dry resin , Double/single tags or screw type bolts terminals, Self healing PPM/PPMh dielectric, AC/DC voltage applications.
• RMS Voltage: 250 - 1000 V
• Rated Volage DC: 420 - 2100 V
• Rated Capacitance: 0,1/600mFd
• Applications: High power lighting

Digital Potentiometer is a precision instrument for potentiometeric measurements. Results are displayed in milli volts on a direct digital readout by light emitting diodes (LED).

Feed the power to your hungry subs with these digital capacitors. They work as power reservoirs and thereby gives the demanded boost to the amplifiers.

Toroidal inductors and transformers are passive electronic components, typically consisting of a circular ring-shaped magnetic core of high magnetic permeability material such as iron powder or ferrite, around which wire is coiled to make an inductor. Toroidal coils are used in a broad range of applications in AC electronic circuits, such as high-frequency coils and transformers. Toroidal round cores offered by us find usage in low tension and high tension transformers and are wound from cold rolled grain oriented (CRGO) silicon steel strips ranging from 10mm to 100mm single slit and we offer core sizes from 15mm ID to 1000mm OD. To provide optimum performance. these toroidal cores are wound by automatic core winding machine and are annealed in high vacuum furnace under protection of nitrogen atmosphere or in continuous tunnel furnace, which results in features like compact volume, light, low magnetic leakage and hum & high efficiency. In CRGO grades required by customer, duly wound and annealed in inert atmosphere.Guaranteed No load current (AT /Cm) as per B-H Curve of particular grade In house testing facilities and 100% testing done on all Toroidal Cores at flux densities specified by customers. Annealing in controlled Nitrogen atmosphere for 18 to 24 hours (at 800° C) Testing for electrical values and issue of test certificates Painting or impregnation (if required) Toroidal Tech Data Toroidal cores can be supplied for use in the manufacture of current transformers, instrument transformers, etc. Typically, such cores are manufactured from grainoriented steel and fully stress relief annealed. Cores are tested to all agreed-upon technical requirements and customer specification flux density. Dimensional the feasibility of any particular combination of dimensions will be verified at the time of an enquiry. Toroidal Cores: Options Shape Round Coating (a) Epoxy edge bonding to fix shape and retain best performance (Recommended for large diameter). (b) Epoxy powder coated to a nominal thickness of 0.025”(Maximum core weight = 5Kg Material used in these cores are prime CRGO electrical steel in grades. M3, M4, M5, MOH, TCH-0, TCH-1, ZDKH. as per customers requirement while ordering specify the inside and outside diameter and strip width in mm.

Tantalum SMD Capacitor, Integrated Circuit, Gsm Module, smd capacitor

Power Factor Correction Capacitor, Automatic Power Factor Correction Panel

metalized film capacitors

dc filter chokes, CONTROL TRANSFORMERS, Current Transformers, Transformers