PCL-SUMO Air Technology Pvt Ltd Kandivali West, Mumbai, Maharashtra

Material : Steel

Application : Industrial

PCL's "Made in Sheffield" Tyre Tread Depth Gauge is manufactured to stringent quality standards and is VOSA approved for MoT testing. Easy to read this VOSA approved Tyre Tread Depth Gauge provides accurate measurement of tread 1-26mm and has a handy pocket clip.    Features a 1.6mm illegal tyre tread depth mark

A range of two stage air compressors, manufactured by Air Marshal Compressors, that consist of two or more cylinders. The two stage compressor consists of two or more cylinders. The atmospheric air enters into the low pressure (LP) cylinder through an inlet filter & valve which passes to the high pressure (HP) cylinder through the inter-cooler for a final pressure. The highly efficient inter-cooler provides maximum heat dissipation between stages resulting in more air per horse power and less trouble from carbonation. Air Marshal Compressors are useful in textile, plastic industries, paper industries, spray painting, blowing, cleaning, chemical plants, pneumatics, ceramics, automobiles, foundries, pharmaceuticals, service stations, etc.   Consists of two cylinders Available in various models.

These Twin Hold-on Connectors are suitable for inflation of twin tyres. There are two types of connector. It is therefore important when purchasing connectors to specify whether a closed or open end type is required. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. An Open End connector is used with MK3 Tyre Inflator, PCL wall gauges and PCL portable gauges. This connector has a pin which unseats the tyre's valve when is use. The handles on these connectors are black in colour. Suitable for inflation of twin tyres Colour coded handles - black for open end and red for closed end Choice of stem length The Twin Hold-on Connectors are available in both Open and Closed Valve Styles.

PCL has built on its world-leading tyre inflation knowledge to create the new AIRFORCE® MK4 Truck Tyre Inflator On the face of it, the AIRFORCE® MK4 Truck Tyre Inflator looks exactly the same as the AIRFORCE® MK4 Tyre Inflator. The big difference is that the AIRFORCE® MK4 Truck Tyre Inflator is capable of inflating up to 174 psi (12 bar), a substantial hike from the already impressive 138 psi (9.6 bar). The AIRFORCE® MK4 Truck Tyre Inflator is a gauge which not only answers the market need for a higher pressure inflator but also provides one which can withstand harsh tyre shop environments. The new AIRFORCE® MK4 Truck Tyre Inflator is set to become the heavy duty solution for providing safe, cost-effective and trouble-free high pressure inflation with guaranteed accuracy. This in turn will give truck tyre users the benefits of extended tyre life, increased fuel economy and improved safety. The reliable and versatile AIRFORCE® MK4 Truck Tyre Inflator, with its aluminium die cast body and linear gauge represents the best product on the market for both indoor and outdoor applications, even in extreme weather. New Viewing Window - Larger window gives 20% greater field of viewing Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped New Valve Mechanism - Simplified 2 stage mechanism design prevents user having to "push" against full line pressure on deflate preventing fatigue New Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2014

Pack of 5 Saw Blades for Air Body Saws. This pack of Saw Blades is suitable for use with PCL and other brand body saws. Suitable for use with PCL and other brand body saws Excellent performance Universal fitment Fast clean cutting action Pack of 5 Saw Blades Size - 95 mm x 13 mm x 32 T

Brand Name : PCL

These N2 Generators have the ability to present the tyre pressure, allowing the operator to use either Air or Nitrogen to automatically inflate FOUR tyres collectively to the required level, saving time and money. Using adjustable purge cycles (settings 1-5) and the Proprietary Software which has been specially developed for N2 Inflation, the unit converts Air to Nitrogen. This enables the equipment to inflate up to four tyres at once, delivering consistent high levels of N2 purity in the tyre when required.

4,000 blows per minute Rugged design Straight handle Positive lever action Hardened self adjusting needles

The N2 Generator provides a robust, cost effective and mobile design capable of delivering high levels of N2 purity. PCL-SUMO have introduced the new Nitrogen range with the launch of the PCL-SUMO N2 Generator Inflator. The N2 Generator brings the latest in the PSA (Pressure Swing Adsorption) process for Nitrogen Generators. The robust, cost effective and mobile design is capable of delivering High levels of N2 purity. This leading technology has been added to PCL-SUMO’s inflation portfolio and is now seen on forecourts across India. These N2 Generators have the ability to present the tyre pressure, allowing the operator to use either Air or Nitrogen to automatically inflate FOUR tyres collectively to the required level, saving time and money. Using adjustable purge cycles (settings 1-5) and the Proprietary Software which has been specially developed for N2 Inflation, the unit converts Air to Nitrogen. This enables the equipment to inflate up to four tyres at once, delivering consistent high levels of N2 purity in the tyre when required. Using N2 improves fuel efficiency, extends tyre life, lowers fuel usage which reduces CO2 emissions and increases safety which is why it is used in Aeroplanes and Formula 1 Cars. In short, the PCL-SUMO N2 is cost efficient which generates opportunities for Tyre Service providers enabling them to offer high performing N2, low running costs and a long lifetime, all for a moderate Capital outlay

This multifunctional work light is ideal for increasing vision in areas of low light and during the winter months when days are very short. Very handy as a general purpose light that can either be hung up or used with the magnet attached to the rear. Ideal for increasing light in under car areas. 24 high intensity output LEDs that never get hot LED lifetime 100,000 hours 4 hours continuous use Complete with foldaway hanging hook Requires 3 x AA batteries (Not Included)

PCL-SUMO Air Technology Pvt Ltd brings together two industry heavyweights to form India's top Tyre Inflation and Pneumatic Products provider. The alliance of two experts to form PCL-SUMO allow Indian customers instant local access to a vast resource of experience, products and international support, all delivered with an in-depth knowledge of the Indian market. Ergonomic design for comfort Lightweight Reduced vibration Twin hammer impact mechanism

this 38" impact wrench is ideal for bench work, small engine & body repairs, ignitions, body panels and transmissions. Single hammer mechanism forward and reverse mode handle exhaust

From 10mm to 32mm, this high quality 18 Piece 1/2" Drive Impact Socket Set covers everything you would require for 1/2" drive. This 18 Piece 1/2" Drive Impact Socket Set comes complete in professional carry case with individual labelled moulds for easy identification. Impact rated 6 point chrome molybdenum sockets 18 sockets to cover almost all applications with a 1/2" impact wrench Storage case complete with individual labelled moulds for each socket size All PCL sockets exceed ANSI specifications Features two grease rings for superior user grip Centre hole is punched through for extra depth on the work surface Offers Z-Drive, contacting the flat walls of fasteners for stronger grip Thin wall design with chamfered openings for easier mating to fasteners

1/2" Drive Alloy Wheel Single Impact Sockets to fit any 1/2" impact wrench offering protection for alloy wheels. These 1/2" Drive Alloy Wheel Single Impact Sockets are manufactured from high grade hardened Chrome Molybdenum steel for longer life encased in protective plastic sleeve to prevent damage to alloy wheels. Chrome Molybdenum Material Thick walls prevent breakage For use with 1/2" impact wrenches PCL branded with sizes printed clearly on body of socket

This Digital Universal Service Gauge is self-calibrating and features a 90 second auto power off. Easy to use, simply press the button and wait for the beep - the Digital Universal Service Gauge is then ready to use. Tyre pressures are displayed in your choice of 4 pressure measurements. Ideal for commercial vehicles when reading high volume tyres.   4 measurement options - psi / bar / kPa / kg/cm² Swivel head to allow easy access to the tyre valve Clear large display Ergonomic handle for comfort in use Lightweight body with robust steel shaft and head Replaceable batteries (x2 LR44 and x1 CR2032) Red backlit screen for easy reading in dark or low light areas Specifications

A straightforward and simple to use Digital Tyre Tread Depth Gauge measurement device with three different read settings. PCL's Digital Tyre Tread Depth Gauge is suitable for tyre tread depth or brake shoe and pad wear.   Lightweight (40g) Strong and robust housing material - made from extra strong carbon fibre composite Easy to read large LCD display Zero setting in any position - allows easy "calibration" for zero reset Metric, decimal inch and fraction inch (1/64 inch) toggle 1 battery - SR44 1.5v (supplied)

The robust engineering plastic design offers longer life and low maintenance, whilst the durable ceramic sensor enable extremely precise measurement This makes it ideal for car dealership, garages, car fleets and OEM applications, where ease of use, accuracy and reliability are key.Dual screen Suitable for Petrol pumps Car dealers Consistent cost effective provision of high levels of safe air inflation services

The DAC51 Digital High Pressure Gauge are the latest in the line of quality high pressure measuring equipment from PCL. PCL's Digital High Pressure Gauge is built for fast, safe and accurate tyre pressure measurement in rugged and testing environments they are the ideal tool for high pressure applications. Includes 2 tyre valve connector types of 8v1 and 12v1 designation Clear digital readout display Highly accurate reading resolution Equipment contained within a moulded foam cut-out with a sturdy yellow plastic carry case for easy identification Allows pressure to be measured and stored for easy reading via the hold function 100% individually tested and certified Specifications

This Die Grinder has high velocity and low vibration, safety throttle lever with 6 mm collet (3 piece design). Ideal for tyre buffing, polishing and grinding. This Die Grinder is very versatile and works excellently in a confined workspace. Medium motor size 6 mm collet (3 piece design) Rear exhaust through handle High velocity, low vibration Safety throttle lever 22,000 rpm for maximum performance Positive throttle action

The APT719 Cut Off Tool works with cutting disks for 75 mm in diameter confirming its ability to work efficiently in small confined spaces. This Cut Off Tool works excellently in a confined work-space and is ideal for light cutting tasks. Rear exhaust through handle For discs up to 75 mm diameter (up to 10 mm thick) Positive throttle action with safety feature Metal safety guard

PCL's Blowgun Style Tyre Inflator is a general purpose tyre inflator with an all Alloy body with a rubber protected gauge. The LTG01 Blowgun Style Tyre Inflator has a durable alloy body and Euro style valve connector, and comes complete with operating instructions. Simple and easy to use, they are ideal for general low volume tyre inflation.