Petroplus Inc. Borivali West, Mumbai, Maharashtra

We offer Vacuumplus Fluid. Non flammable, No residues, Very low evaporation, High pressure resistance

Thermoplus fine Heat Transfer Fluid product Description thermoplus Heat Transfer Oils are High Performance Products Intended for Use in Closed Indirect Heating Installations. They are Formulated from Highly Refined Base Stocks that are Resistant to Thermal Cracking and Chemical Oxidation. They have Good Heat Transfer Efficiency and Their Viscosities are such that They Can Be Pumped Readily At Both Start-up and Operating Temperatures. the Flash Points of These Oils Will Not Decrease Significantly in Service Because of Their Resistance to Thermal Cracking At the Operating Temperatures for Which They are Recommended. the Thermoplus Products are Very Thermally Stable and are Capable of An Extremely Long Service Life Without Deposit Formation or Viscosity Increase. They Demonstrate Specific Heats and Thermal Conductivities that Provide More Rapid Heat Dissipation. Thermoplus Heat Transfer Oils are Recommended for Use in Both Closed and Open, Cold-oil Sealed, Indirect Heating and Cooling Systems in all Kinds of Industrial Processes. features and Benefits thermoplus Oils are Important Member of the Petrelplus Brand of Specialty Fluids that have Gained a Reputation for Performance and Reliability, Even in Severe Applications. Application of the Most Modern Refining Techniques is a Key Factor in the Excellent Features of These Products applications application Considerations: Thermoplus Heat Transfer Oils Should Not Be Mixed with other Oils Since this May Impair the Excellent Thermal and Oxidation Stability of the Thermoplus Oils, Cause a Change in other Properties, and Complicate the Interpretation of Analyses Made to Determine the Oil's Useful Life. if the Oils are Used Above Their Recommended Maximum Temperatures, Vapor Lock May Result Unless the System is Designed to Operate At the Higher Temperature By Pressurizing with An Inert Gas such as Nitrogen. However, At Higher Temperatures, Fluid Life Will Be Shortened Because the Rate of Thermal Degradation Increases Markedly as Temperatures Rise Above the Recommended Limit. in Well-designed Systems the Temperature of the Oil Film Surrounding the Heating Element Should Be About 15ºc to 30ºc Above the Bulk Oil Temperature. if Higher Than This, the Service Life of the Oil May Be Shortened and Sludge and Coke May Be Deposited Which Would Interfere with the Heat Transfer Rates. as with other Mineral Oils, Thermoplus Heat Transfer Oils Should Be Used Only in Systems with Forced Circulation. Systems that Depend On Convection for Circulation of the Heat Transfer Medium Do Not Provide a Rapid Enough Flow to Prevent Local Overheating and Rapid Deterioration of the Oil. Further, These Oils are Not Recommended for Use in Open Systems Where Hot Oil is Exposed Directly to the Air. thermoplus Can Be Used in Open and Closed Installations Where the Bulk Oil Temperature Ranges are as Outlined in the Table Below and Where Minimum Shutdown Temperatures are Not Below -7ºc. • bulk Oil Temperature Ranges for Thermoplus : Closed Systems (-7 C to 315 C), Open Systems (-7 C to 180 C) • closed, Cold-oil Sealed, Indirect Heating and Cooling Systems in all Kinds of Industrial Processes Operating At Bulk Oil Temperatures Up to the Maximum Temperatures Quoted in the Table Above and At Atmospheric Pressure. • open Systems Provided the Bulk Temperatures Do Not Exceed the Maximum Temperatures Quoted in the Table Above. available Packs: 210 Ltr.

Brand Name : Petrelplus

Taste & odourless Good adhesion Resistance to cold & hot water Excellent protection against wear

We offer silicon grease . Taste & odourless good temperature behavior neutral towards froth excellent sealing compatibility

We offer SILICON FLUID . Low pour point High surface activity God viscosity & temperature behavior High compressibility

QUENCHPLUS – 55 PRODUCTS DESCRIPTION Quenchplus 55 is blended from specially selected lube oil base stocks with inherent oxidation and thermal stability having high viscosity index, fluidity and low volatility. Quenchplus - 55 is a straight mineral type oil processing normal quenching characteristics. APPLICATIONS Quenchplus 55 is recommended for all normal quenching operations on variety of steels to impart desired hardness to components without distortions. It is advisable that oil-bath temperature is maintained at optimal level for best quenching performance and long service life. The recommended oil-bath temperature of 50 ºC - 65 ºC will meet most of quenching requirements. Quenchplus 55 is suitable for hardening of nuts, bolts, bearings and other components manufactured by automotive and light engineering industries. PERFORMANCE STANDARDS IS : 2664-1980 (reaffirmed 1993), Straight mineral type, grade superior. QUENCHPLUS – 55 Appearance Clear & Bright Specific Gravity @ 29ºC 0.84- 0.860 Flash Point, COC, ºC 215-220 Kinematic Viscosity @ 40 ºC, cSt 30 Kinematic Viscosity @ 100 ºC, cSt 5.2 Viscosity Index 105 Pour point ºC max -15 PERFORMANCE BENEFITS • Good quenching characteristics • Imparts uniform hardness without distortion.

Country of Origin : India

Type : Lubricating Oils

Brand Name : Petrelplus

Certification : ISO 9001:2008 Certified

Form : Liquid

Good surface wetting wide operating temperature range protect reliably against friction & wear excellent cleaning properties.

we offer Oxygen compatible grease. Use for driving equipment Outstanding chemical resistance Work swith heavy load & temperature Non corrosive

We offer lubricating fulid. Excellent wetting properties, High oxidation stability, No resinification or sticking, Very good lubricating film load capacity

Long oil change intervals High load carrying capacity High adhesion & creeping effect Low evaporation losses

LITHEXPLUS - 3 Product Description Lithexplus – 3 is a lithium soap grease formulated to provide outstanding mechanical stability. It is a multi purpose grease developed for use in a variety of operating conditions. Lithexplus – 3 grease provides excellent lubrication in both high and low temperature conditions. The product combines oxidation and corrosion inhibitors with high quality base stocks. It provides good resistance to water wash out and performs well under heavy load and high speed conditions. The product may be used within the range of temperatures defined by its minimum 200° C drop point and maintains excellent pump ability at low temperatures. Applications • LITHEXPLUS – 3 IS RECOMMENDED FOR AUTOMOTIVE, INDUSTRIAL, MINING & AGRICULTURE APPLICATIONS. Performance Standard NLGI-3

Country of Origin : India

Material : Chemical

Brand Name : Petrelplus

High pressure resistance excellent wear protection very good ageing & oxidation stability high oil purity.

Hydroplus Hydraulic Aw Series are Premium High Performance Oils Intended for Industrial and Hydroplus Service Where Anti-wear Lubricants are Required. the Hydroplus Hydraulic Aw Series Oils are Designed to Satisfy the Performance Requirements for a Wide Range of Hydraulic Components in Systems Subjected to High-pressure, High-temperature Operating Environments. Their High Level of Resistance to Oxidation and Good Thermal Stability Characteristics Help Reduce Deposit Formation and Help Prevent Sluggish System Operation. They Provide Good Protection Against Rust and Corrosion in High Humidity Operations or Where Low Levels of Moisture are Unavoidable. They Separate Water Readily and have Very Good Air Release Properties. These Products Meet the Performance Requirements of a Wide Range of Hydraulic System and Component Oem's and are Compatible with the Pump and Component Metallurgy Used By Various Manufacturers.

Type : Hydraulic Oil

We offer Heat transfer fluid. Reduce oxidation low vapour pressure improved heat transfer minimum operating cost.

Low friction coefficient Tribo corrosion Offers optimum protection against Long maintenance

GEARPLUS EP SAE 90 & 140 Product Description Gearplus EP 90 and 140 are premium automotive gear lubricants that are blended from high quality base oils and an optimum balance of additives. These lubricants have a long history of reliable performance where API GL-4 level protection from wear and scoring is required in heavy duty transmissions, axles, and final drives. They provide effective chemical and thermal stability. Features and Benefits Today's automotive and heavy duty applications place higher demands on drive train lubricants. The quality built into Gearplus EP gear lubricants delivers reliable protection in current drive train applications as well as older models. • Good thermal stability and oxidation resistance which extends gear and bearing life . • Protects against wear which enables reliable load carrying while controlling maintenance costs. • Effective rust and corrosion protection to control wear under tough operating conditions. • Good low temperature fluidity which reduces wear at start-up. • Good foam control which improves lubrication and extends seal life. Applications • Heavy duty manual transmissions, axles, and final drives requiring API GL-4 • Passenger cars, on highway light and heavy duty trucks, busses and vans • Off highway industries including: construction, quarrying, mining, and agriculture • Other heavy duty industrial and automotive applications including hypoid gears operating under moderate to severe conditions Performance Standards API GL-4, MIL-L-2105, IS 1118 : 1992 please visit at www.petroplus.in

Brand Name : Petrelplus

Application : • Heavy duty manual transmissions, axles, and final drives requiring API GL-4 , • Passenger cars, on highway light and heavy duty trucks, busses and vans ,• Off highway industries including: construction, quarrying, mining, and agriculture ,• Othe

We offer Freezplus lubricating fulid. Thermal stability Long drain For CFC HCFC Optimize equipment

Petrelplus is a manufacturer of food grade lubricants for food & beverages manufacturer company with the brand �petrelplus� for automotive and industrial plant equipments and outdoor machines & these are helpful in increasing the life, efficiency & flawless working of machinery. Our innovative technology results in superior performance and huge energy /maintenance cost savings. Our all food grade lubricants are approved by us, fda with nsf h-1 certification along with specialties lubricant for all type of pharmaceutical, food & beverages, cosmetics and tobacco industry.

FLEETPLUS 15W-40 High Performance Diesel Engine Oil FLEETPLUS 15W-40 is a high performance diesel engine oil that provides proven engine protection of diesel engines operating in on and off-highway severe service applications. FLEETPLUS15W-40 is recommended for use in a wide range of heavy-duty applications and operating environments found in the trucking, mining, construction, quarrying, and industries. FLEETPLUS 15W-40 are engine oils formulated from advanced technology base oils and a balanced additive system. They are specifically engineered for performance in intercooler, turbo-charged engines operating under severe on and off highway conditions. Benefits Excellent protection against oil thickening, high temperature deposits, sludge build-up, oil degradation and corrosion. Applications • Naturally aspirated and turbo-charged diesel powered equipment from leading Indian manufacturers • On-highway light and heavy-duty trucking • Off-highway industries including: construction, mining, quarrying, and agriculture • Mixed fleet applications Performance Meet Standard API CF-4 / SJ MB 228.1 E-DL 4 OF IS:13656-1993 Due to continual product research and development, the information contained herein is subject to change without notification. Typical Properties may vary slightly. The Material Safety Data Sheet (MSDS) are available upon request through our sales office. * All related specifications are meets or exceeds.

Brand Name : Petrelplus

Application : USE IN ALL TYPE OF HCV, LCV LIKE TATA MOTORS, ASHOK LEYLAND, EICHER, M&M, ESCORTS. ALL TYPE OF TRACTORS GENSETS & IN BOTH TURBO AND NATURAL ASPIRATED ENGINES.

We offer Fire resistance hydraulic fluid. Water soluble Reduce operating cost Extra lubricity Anti corrosive

Neutral towards froth Physiologically harmless Excellent properties Works with high temperature

Odourless no sulfur & chlorine no chlorine extend tool life.

Compressorplus 32, 46, 68 product Description the Compressorplus is a Line of Supreme Performance Oils Primarily Intended for the Lubrication of Severe Duty Rotary Screw and Vane Air Compressors. They are Particularly Suited for Severe Service Where Mineral Oil-based Products are Not Meeting Expectations such as in Severe Applications Subjected to High Final Compression Temperatures or Where Extended Oil Drain Intervals are Desired. They are Formulated with Design-specific Wax-free Synthetic Hydrocarbon Fluids and a High Technology Additive System that Assures Exceptional Resistance to Oxidation and Thermal Degradation Far Superior to Mineral Oil-based Air Compressor Oils. They Provide Outstanding Equipment Protection and Reliability for Compressors Operating Under Conditions Where other Air Compressor Oils are Not Meeting Expectations. Compressorplus Provide Excellent Wear Protection and Outstanding Resistance to Oxidation and Thermal Degradation, Greatly Superior to Mineral Oils. Their Unique Formulation Provides the Ability to Reduce Maintenance Costs Through Minimizing Equipment Problems and Downstream Deposits and Carryover. Their High Viscosity Index Ensures Effective Lubrication At High Temperatures. compressorplus Lubricants Significantly Reduce the Potential for Fires and Explosions When Compared to Mineral Oil-based Products. They Exhibit a Virtual Absence of Deposit Formation and High Auto Geneous Ignition Temperatures Improving Both Performance and Safety. Their Exceptional Water Separating Characteristics Reduce Problems with Emulsion Formation Coalescers and Filters Reducing the Need for Frequent Maintenance. features and Benefits the Use of the Compressorplus Oils Can Result in Cleaner Compressors and Lower Deposits Compared to Conventional Mineral Oils, Resulting in Longer Running Periods Between Maintenance Intervals. Their Excellent Oxidation and Thermal Stability Safely Allow Extended Life Capability While Controlling Sludge and Deposit Formation. They Possess Outstanding Anti-wear and Corrosion Protection, Which Enhances Equipment Life and Performance. performance Standard din.51524 Part Ii, Us Steel 127 applications • primarily Recommended for Rotary Screw and Vane Air Compressor • very Effective in Screw Type Compressors with Oil Injection Cooling • units Operating Under Severe Conditions • multistage Units with a History of Excessive Oil Degradation from Mineral Oil-based Products • compressor Systems with Critical Gears and Bearings • compressors Used in Stationary and Mobile Applications avialable Packs in 20, 210 Ltr.

Brand Name : Petrelplus

We offer Compressor Plus fluid. Low oil consumption Increase compressor performance Minimize operating temperature Optimum protection against friction & wear