Pharmaceutical Machines Dealers in Oshiwara, Mumbai

We offer Octagonal Blender.

• Weight: 400-500kg
• Voltage: 230V
• Power Source: Electrical
• Application: Industrial
• Automatic Grade: Automatic
• Power(W): 1-5kw
• Heaters: 'u' Type Tubular Heaters are Provided Inside the Chamber for Maximum Heat Transfer. Steam Heated Models are Fitted with Finned Type Steam Radiators.

  Features : Applications : Tray Dryers are ideally suitable for drying chilies, spices, papads, potato chips, onions, fish, garlic, grapes, cashew nuts, confectionery, macaroni, wood etc. It is also for used for drying pharmaceuticals, chemicals, powders, granules, plastic granules etc. Heating is either by electric or steam or both combined. Various models are listed in this leaflet to suit customer requirements. Custom-built models can be quoted on request.  Construction : The external frame work is made of thick gauge M. S plates both the exterior made of thick gauge CRCA sheets or AISI 304 sheets. in between the space, resin bonded special quality fiber glass heat insulation slabs are provided. safety guards for fan blade & heaters are provided. The interiors is painted with heat resistant aluminum paint. The exterior is spray painted with silver gray gloss paint, Inner Chamber - CRCA or AISI 304, Outer Chamber - CRCA or AISI 304. Fan & Motor : According to models doors are provided with smooth moving hinges, latch catch & sealing gaskets. Well balanced large propeller type fan (S) fitted inside the chamber with suitable shaft & dual bearing with Electric motor (S) drive. Controls Panel : Control Panel box consists of contactor assembly, On & Off switch, Digital Controller neon lamps, operating push buttons are incorporated in the control Box. Damper : Adjustable exhaust Damper with an arrangement for pre-filtration, in the air inlet. Optional : GMP models / complete S.S unit. Trolleys & Trays supplied as per requirement. Microprocessor based temp. Control with printer interface (Centronic PC interface with RS 232 CPC / RS-485 for networking of controllers. Profile controller for Ramp / Soak cyclic applications. Safety Features : Built-in temp. deviation audio visual alarm. Safety thermostat for over shoot temp. cut off circuit to cut off the whole systems in case of malfunction. (only applicable to Microprocessor based models). Validation : IQ OQ PQ & DQ Protocols with complete documentation & certification traceable to National & international Standards. Steam Heated Models : These are provided with finned tubular steam coils instead of /in addition to heaters, along with solenoid valve.

• Condition: New
• Size: Standard
• MOQ: As Per Client Requirement

We have developed robust payment processing procedures to facilitate safe and quick exchange of the trade. We are deeply ingrained in Mumbai(India) and carved a niche for ourselves by offering the finest products at very affordable rates.

Standard/cGMP construction Models available. All contact parts in AISI SS 316/ 304 like feeding Hoper, Beater, processing chamber etc. Output: 50kg-300kg/hr depending on product & reduction size required. Capacity from 1H.P. to 5H.P. Multi speed drive for various product grinding. Direct Drive/ Belt Free Drive possible for pharma Application Easy dismantling and cleaning. High degree of surface finish. cGMP construction

By making use of quality packaging material, we pack the entire lot in a safe manner ensuring zero damage at buyer's end. The packing procedure is conducted under the guidance of experts. With us, payment transactions will always remain secured as we follow reliable online payment gateway that is handled by a trusted e-commerce application service provider.

• Dimension: NA
• Country of Origin: India
• Material: 316
• Color: MIRROR FINISH
• Country of Origin: INDIA

SS SCOOP-1/2KG SS SCOOP -1 KG SS SCOOP -1.5 KG SS SCOOP -2 KG MOC 316 18SWG

• Country of Origin: India
• Type: Stainless Steel Scoop
• Material: Stainless Steel
• Application: Pharma
• Color: Silver
• Feature: Fine Finished, Non Breakable, Superior Quality
• Capacity: 1.5kg, 100gm, 1kg, 250gm, 2kg, 3kg, 500gm, 5kg
• Finishing: Polished
• Handle Length: 30-40mm
• Brand Name: SWS

• MOQ: As per requirement

AMI Tray Dryers are suitable for drying any type material like PVC Granuale Plastic ABS & Nylon Powder Drying, Chemical Powder Drying. The company is the largest manufactures of Tray Dryers in the country today and leads its vast experience of two decades in Drying Technology to application in various process.Temp.Range : 150 C, 250 C , 450C.

Blister Packaging Machine Model BPM-500 has been widely used for the package of hardwares, toys, daily used articles and electrical elements. The commodity packed is featured as transparent, damp proof, dustproof, secure and pleasing to eye.

It is made in round or square hole mounted with sheet along with mesh pressed in between. These have friendly user design and are extremly easy in operation and maintenance.

Royal Pack Industries's blister packing machine is special for Pharmaceutical factory for packing Alu Alu Blister Packaging.This is a medium Blister Packing machine.It can pack aluminum Aluminum and aluminum plastic blister packaging.We have sold the machine all over the world,Such as Viet Nam,Nigeria,South Affric,Brazil,and so on. The product uses the composite Aluminum film as material which has best performance of seal, proofing moisture and light, and uses special mould to cool-form. It is renewed packing equipment in pharmaceutical industry. The machine has two functions. When it changes mould, the machine can pack the object not only with Aluminum-Aluminum, but also with Aluminum-Plastic.

• Capacities: 5 Liters to 2500 Liters

HIgh Shear Granulator is a multi-purpose processer equally suitable for high speed dispersion of dry powders, aqueous or solvent granulation, and effervescent products and melt pelletization. Wet granulation is a common step in the manufacture of many solid dosage pharmaceuticals. Wet granulation can be accomplished in a high shear granulator.A mechanical impeller moves the powder while a liquid binder is applied onto a moving powder bed. Addition of the liquid binder starts the formation of granules. The granulator also has a chopper. Impeller and chopper are mainly responsible for wet granulation in the rapid mixer granulator.

We are offering multi mill. our company is well-known for the manufacturing and supplying of a quality range of multi mill. Our multi mill is cautiously manufactured from a-grade quality components ensuring high quality standards. This multi mill finds great application in pharmaceuticals, foods, beverages and chemical industries. Our multi mill is recognized for its durability, easy cleaning, higher output, flameproof electrical components and strong construction. We ensure safe packaging and timely delivery of multi mill. features of multi mill direction of beaters can be changed by reversible switchall contact parts can be easily and quickly dismantled and cleanedcylindrical screen for higher outputcastor wheels provided for mobilityflameproof electrical components can be provided at extra costbeaters and scrapper blades of ss 304 quality

The dryer is ideally suited for use for drying pharmaceutical chemicals, powders, pigments, plastic granules, agricultural products like drying chillies, spices, papad, potato chips, onions, fish, garlic, grapes, cashew nuts, confectionery, macaroni, wood etc. The dryer is made out of angle frame; doubled walled from CRCA mild steel, thermally insulated with 3 inch thick glass wool between the walls. Inner body is finished with heat resistant aluminium paint, outside in grey hammer tone. The dryer is electrically heated with sheathed tubular heaters and fitted with fan run by belt driven drive unit or steam heated with digital temperature control.

Our Double Rotary Press is available in both Open and GMP model. Currently more than 300 of our machines are producing tablets across the globe. Some of the key features of the Double Rotary press are:   Drive shaft made of alloy steel to ensure longer working life. Turret Ring is detachable from the turret and thereby reducing replacement cost. Discharge chute and feed frame are independent of turret guards, thereby reducing cost of maintenance and also eases setting the feed frame. Double V-belts to increase life of belts Our open model is simple and basic but performs better than most competition. It has all the same features of the GMP model except for Front Control, AC Drive & Timer Controlled Automatic Lubrication. However we do provide Timer Controlled Automatic Lubrication at extra cost Both the models can be provided with De-dusters and Dust Collection Unit.

Provided with an inbuilt conveyor of pre-polished S.S. 304 Sheets. Rotary Filler and Sealer made from M.S. Plates, machined and painted (thickness: 25mm) with S.S. 304 cladding Sheet (thickness: 1.6mm, gauge: 16mm). On the top a stainless steel cam duly machined will be provided in two pieces. On the top of the machine, an automatic cap feeder, made from gun metal casting, precision machined, duly chromium plated will be provided suitable for feeding standard ROPP Seals of 22mm, 25mm and 28mm. Provided with standard sealing heads, made from high carbon high chrome steel suitable for sealing with 22 mm or 25 mm or 28 mm standard ROPP seals. All Pneumatics of Festo or SMC. All sensors will be of P&F or Sick. All the change parts made of Cast Nylon. Also, available Volumetric Filling cum Screw Capping Machine (MONOBLOCK)

Compounding Aseptic Isolators create a positive pressure clean air [ISO Class 5] controlled environment specifically for aseptic compounding of non-hazardous drugs. The HEPA filtered work area maintains a positive pressure relative to the interchange compartment, which operates at a positive air pressure relative to the surrounding room. These two levels of protection minimize the possibility of contamination migrating into the work zone.

• Capacity: 90000 capsules/ hour
• Voltage: 220 V
• Power: 1 kW
• Body Material: Stainless Steel
• Phase: Single Phase
• Usage: Pharmaceutical
• Frequency: 50 Hz

• Features: Unit with different screen. , Noiseless, maintenance free unit.

Vibro sifters are circular gyratory screens used to separate mass composition of solids, liquid from solid and for gradation of materials as per particle sizes.

Royal Pack Industries's blister packing machine is special for Pharmaceutical factory for packing Alu Alu Blister Packaging.This is a medium Blister Packing machine.It can pack aluminum Aluminum and aluminum plastic blister packaging.We have sold the machine all over the world,Such as Viet Nam,Nigeria,South Affric,Brazil,and so on. The product uses the composite Aluminum film as material which has best performance of seal, proofing moisture and light, and uses special mould to cool-form. It is renewed packing equipment in pharmaceutical industry. The machine has two functions. When it changes mould, the machine can pack the object not only with Aluminum-Aluminum, but also with Aluminum-Plastic.

• Usage/Application: Pharmaceutical Industry
• Automation Grade: Automatic
• Body Material: Stainless Steel
• Features: Ideal for small / medium scale pharmaceutical units which can make a significant difference in your production unit,This machine is compact occupies minimal space, easy handling and user friendly,More accuracy with economic production cost,The base & cove

We are the eminent manufacturer and trader of Double Cone Blender widely used by the pharmaceutical and chemical industry. These Double cone blender are manufactured using quality raw material. Made available in customer specific dimensions, Double Cone Blender provide high production capacity .

Suitable for 24 Trays of size 32" x 16" x 1¼" loaded on fixed angles. DRYING CHAMBER: Double walled construction with insulation in between. With one door. Outside body fully welded, step less with rounded edges and corners. Inside body fully welded with rounded edges and corners to maximum extent. DOORS: Single door with Double walled construction with insulation in between. Heavy Hinges Handle for opening and sparkless locking. AIR RECIRCULATION: Two coaxial fans driven by common Flame proof motor through “V” belt and pulleys.Air inlet with micron filter. Exhaust with adjustable damper. HEATING: By finned tube radiator with square meter heat transfer area Suitable for either steam hot water or thermic fluid and By KW Electrical heaters ESCORT’ brand Electrical heaters. M.O.C: A) All internal and air contact parts like inside wall of chamber, inside wall of door, radiator, recirculation fan, fan shaft , safety grids, exhaust damper, etc in S.S. 304 quality. B) All external, visible and non contact parts like outside wall of chamber, outside wall of door, Hinges, handle, door lock, drive support, drive cover, control panel cover, bottom supports, etc in S.S. 304 quality. C) Gaskets for door, damper, filter, explosion flap food grade silicone rubber. D) Insulation LRB SAFETY: A) Aluminium explosion flap on rear wall. B) Safety covers for drive assembly. C) Door limit switch interlocked with recirculation fan.

Conical Blender :- Well known for robust construction and smooth operation. Clients can avail a customized range of machines as per their requirement. These machines are highly appreciated for their features like high performance, less power consumption, robust construction and easy maintenance. These machines are manufactured using the advanced technologies and available for nominal price.

• Voltage: 280 V
• Operation Mode: Automatic
• Capsule Type: DB, Tamper Proof, Vegetal, Elongated, Special
• Body Material: SS
• Automation Grade: Semi-Automatic
• Driven Type: Electric
• Motor Power: 2 HP

The Pharmaceutical Industry need highly accurate metal detection of tablets and capsules to meet the requirements of demanding consumers and stringent legislation. Salient Features • Very high sensitivity to magnetic and non magnetic metal. • Automatic balancing. • Ergonomic design for easy operation. • RS-485 interface. • Dual channel option. • Alpha numeric display. • 100 product memories. • 3 different level of password. • Digital channel options. • Audio-visual alarm. • SS fabrication. • HACCP compatible. • 100% detection and rejection. • Integrated system. • Closed chute avoids cross contamination. • Compact and compatible to all tablet presses. • Low power consumption.

• Brand Name: Gaylord
• Condition: New
• Material: Stainless Steel
• Product Type: Double Rotary Tablet Press

• Material: Stainless Steel
• Brand Name: Sanipure
• Size: Customised
• Country of Origin: Made in India
• Capacity: 10 gm to 5 kg
• Usage/Application: Pharma

We provide to our customers online shopping for our pharmaceutical products that includes tablet deduster, volumetric liquid filling machines, agitators, homogeniser emulsifier, capsule loading machines, capsule counting and packing machines, plastic tube filling and sealing machine, ancillory equipments etc.