Pipeline Accessories Dealers in Goregaon, Mumbai

AKI has emerged as a leading manufacturer in condensate pot. With high quality and durability condensate pot are supplied all around the world. We have been observing to maintain good accuracy and strength of it in order to meet the customer’s needs. Features   Use as liquid or condensate traps, seal pots, vapor chambers and knockout pots. All connectors are furnished with plastic plugs. Chambers are made from seamless carbon steel pipe and weld caps. All pipe connections are 3000# half-couplings mounted on 90 Degree angle. Extra connections can be furnished upon customer request. Heat code traceability All welding as per ASME SEC. IX All but weld joints will be 100% radiographer and fillet weld will be D.P. tested. All material will have mother test certificates. All condensate pot will be hot dip galvanized. All threads will be protected with dead plugs / plastic caps. Piping code compliance ASME B31.1 and PED category I, Module - A Optional IBR approval is offered, depending upon customer requirement     Technical Specification   Size : pipe size 2",3",4" and larger size upon request.  Length : Pipe length 8",10",12" and larger length upon request  Working pressure : 6000 Psig (413 Bar)  Material of construction : SS 316, SS 304, C.S., ASTM A 106 Gr B  Optional Sour Gas service valves are available confirming to NACE Std. MR - 01 - 75  Pipe Schedule : 40, 80, 160, XX seamless pipe. Chamber as per ISA RP3  NPT as per ANSI B1.20.1 taper pipe thread 1/2" furnished. Socket weld as per ANSI B16.11 Butt-weld as per ANSI B16.9    All chamber are 100% Factory tested prior to shipment.  Application Refineries, liquid petroleum gas processing plant, petro-chemical plants, systems difficult to shur off due to solid contents dust, rust, dirt etc.  Testing Hydrostatic shell test is performed at 1.5 times the working pressure   

We are offering Thermowells are recommended to protect both the operator and the temperature sensor. The proper thermowell will reduce the possibility of damage to the temperature sensor due to corrosion, pressure or the flow of abrasive or viscous media. In addition a defective instrument may be removed without shutting down or draining the process. Most wells have 12" process & instrument connections with a 0.260" bore. Wells with other dimensions and materials are readily available on order.

Bar stock / Fabricated  Flanged, Threaded well, Socket Weld  Available with protective coating like PTFE, Epoxy etc .

We are recommended by the clients for offering a quality tested array of Flanged Thermowell. This range has been made from quality steel and other incorporated materials.

Condensate Pot finds wide usage in processing industry. We are a Maharashtra-based company, engaged in manufacturing, supplying and exporting Condensate Pot. To endure thermal stress, our Condensate Pot is manufactured using high thermal conductivity materials. Our Condensate Pot is marketed with the model no. 3"NB X SCH80-SW.

The Thread Protectors are designed to provide protection to the connections during handling and transportation, and to prevent debris from entering the threads and tube body. The threads are made in such a manner that they cover all the threads of the connections and prevent the thread protector from stripping or vibrating loose. Our thread protectors are made of Nitrile Rubber having high tensile, self lubricating, high temperature & oil resistant properties, upto 90f+5˚A hardness. The rubber material used makes it lighter and rust free compared to metallic protectors.

THERMOWELLprovides complete protection for the sensor (Temperature, Pressure etc) elements. THERMOWELL is designed considering optimum Pressure, Temperature, critical Frequency, the nature of Media (abrasive, corrosive etc) and intensity of flow of media. THERMOWELL allows removing or replacing of Sensing Instrument without draining or shutting down of process. Most Commonly Used - THERMOWELLS THREADED THERMOWELL drilled from Bar Stock OR BUILT-IN. FLANGED THERMOWELL drilled from Bar Stock & welded flange FLANGED THERMOWELL drilled from Bar Stock and in one piece.  

Sight glass is the only item which has nothing to do with glass pipelines. This is used to check inline flow of chemicals or liquids in horizontal as well as vertical installation. It is constructed to give full view from any angle to save time and energy. It is also made a multi-purpose to achieve high standards of economy. Since one sight glass can be used with MS/rubber/lead glasslined etc. It leads to less inventory. One sight glass consists of a glass pipe section, one metal frame, one pair of teflon bush and washers.( Metal frame  can be made of MS/SS 304/SS 316) Glass pipe section is made from borosilicate glass which is highly heat resistant and has low thermal expansion and excellent chemical durability. This pipe section is flared at both ends to increase its compressive strength as well as to ensure of leak proof fitting in metal frame. Metal frame is of mild steel, zinc plated or resin powder coated, as desired, to eliminate the risk of corrosion. Both flanges of frame are welded with stud so that the stresses and vibrations of line, where it is to be fitted, would not transfer to glass pipe section. Its chuck nut system keeps the glass pipe section in compression and make it easy to replace the same. Teflon bushes are provided on both the sides of glass pipe section in a way that flowing liquid/chemical would not be in contact with any metallic part of the sight glass. Further teflon washers are provided to use as gasket on both sides at the time of fitting. Sight glasses can be supplied with the flanges frilled as per customers requirements. However as it is found that most of our clients using sight glasses demand ASA 150 table flanges. We use to keep ASA 150 table glasses ready in stock.

Tiger" Brand CPOTS are specially designed to catch hold condensate and foreign material. Thus, preventing damage to the metering systems and manifolds. These are custom manufactured as per Client’s and Project applications. CPOTS are available in a variety of materials and finishes. Standard pipe sizes are 2” to 4” and a variety of fittings and connections can be provided. FEATURES Condensate Pots are used in the measurement of steam and other vapors which condensate to liquid state at ambient temperature. Condensate Pots are available in a range of materials and are designed in accordance to ASME SEC VIII Div I. Welding as per ASME SEC IX. Various types of Coating used to avoid corrosion. Pipe Length up to 10 inch, more length is available on request. Hydraulic Test Pressure: up to 150 Kg/Cm². Pneumatic Test Pressure: up to 40 Kg/Cm². IBR Form III C will be available on request. NDT (Non Destructive Test) available on request. Standards Followed: ASME B36.10/36.19/B16.9/B16.11. Marking and Identification as per MSS-SP-25.

hermowells are recommended to protect both the operator and the temperature sensor. The proper thermowell will reduce the possibility of damage to the temperature sensor due to corrosion, pressure or the flow of abrasive or viscous media. In addition a defective instrument may be removed without shutting down or draining the process. Available in various sizes .010 to .500 in all types of materials such as 304, 316, 310, 446, Inconel 600, copper and Brass. Optional  protective coatings and sprays also available. Thermo offers single, dual, triplex and multipoint designs with a wide variety of sheath terminations such as, aluminum, cast iron, stainless steel or explosion proof heads. Standard  and miniature plugs and jacks, extension leadwire with a variety of insulations as well as all types of connection fittings.

HYDRAULIC FEATURES The anti-siphon vacuum breaker is an inlet air-logged pressurized valve which opens when there is a pressure drop. The internal obturator disc is normally closed when the water in the valve is at a pressure equal or greater than the atmospheric pressure. The valve opens to permit air to enter, in case the water inlet pressure is lower than the atmospheric pressure and closes completely when the water flow returns to normal pressure. This device is used to avoid siphoning during draining phases in hydraulic plants. In systems that are not permanently connected to the water main, such as water distribution plants, this device keeps contaminated water from returning to the drinking water supply system. The CR brass body renders this device inert to the dezincification phenomenon. This device can be used in conditioning plants, sanitary installations for water supply outside buildings, according to EN 805, sanitary installations for water distribution inside buildings following EN 806-1, and irrigation systems. This product adheres to the standards set forth by the European health authorities for the transport of alimentary fluids and potable water.     TECHNICAL FEATURES Pressure :   Maximum allowable working pressure (PN)   16 bar Preset nominal pressure (Pnr)   0.2 bar (Grade A according to EN 12266-1) Temperature :   Working temperature (TS)   from 0° C (excluding ice) to 110° C Compatible fluids :   Heat transfer fluids in compliance with Italian national standards (UNI 8065 § 6) Glycolate solutions (glycol)   50% Threading :   Pipeline connection Threads according to ISO 228/1 Requirements and tests as per :   Air vents, air return function   EN 1074-4 Body pressure tightness   EN 1982 B7 Seat tightness   EN 1074-4 §5.2.2 Pressure resistance   EN 1074-4 §5.1.1 Protection against pollution   EN 1717 Protection unit   family L type A Categories of fluids   EN1717 list 2 DESIGN Design Cast bronze body   EN 1982 - CB491K Plug and valve in brass   EN 12164 - CW614N Seat gaskets   SILICONE 40 Sh O-ring   NBR RUBBER

Condensate pots are produced in Carbon Steel, Alloy Steel & Stainless Steel. These pots are largely used in metering lines to cool & condense steam & to maintain a constant liquid heat above instruments. All chambers are equipped with top venting entrapped air & can be furnished with a plug .They are also recommended for liquid service when flowing temperature is above 150°C.

all sizes of sight glass available with spares also.

Manufactured following AISI B31. 1 standard 2,3 & 4 in sec 40,80 & 160 used in steam metering lines to cold and condensate steam and to maintain a constant liquid head above Instruments. End Connection:- S/W, Threaded etc. Material of Construction:- C.S., St. Steel, Alloy Steel etc. IBR Quality can be supplied.

We offer different type of Back up rings which are used for holding arm of cable during termination. Back-up rings are used to hold the arm our of the cable during execution of the joint/ termination. Ideal offers different types of back-up rings i. E straight through, spilt type etc. In various sizes. Ideal also offer the same as per customer requirements and specifications.

We are offering thermowell.

• Material: Rubber
• Features: Compact design,High performance,Wearing resistant
• Size: All size
• Usage/Application: Hydraulic Pipe

• Brand Name: Garg India
• Material: Soadlime
• Finishing: Non Polished, Polished
• Shape: Oval, Rectangular, Round, Square
• Color: White
• Condition: New
• Size: 10x8inch, 12x10inch, 14x12inch, 16x14inch, 18x16inch, 20x18inch, 22x20inch, 24x22inch, 25x24inch, 6x6inch, 8x6inch
• Feature: Corrosion Resistance, Eco Friendly
• Pattern: Plain
• Packaging Type: Paper Box
• Type: Sight Glasses
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm, 60-70mm, 70-80mm, 80-90mm, 90-100mm
• Country of Origin: India
• Country of Orgin: india

• Size: Multisizes
• Type: Back Up Ring
• Material: Rubber
• Shape: Round
• Color: Available In Different Colors
• Feature: Fine Finishing
• Finishing: Non Polished

Striving hard to provide the best in class range, we are a Mumbai(India) based company. Noteworthy Supplier of Double Window Sight Glass, we are customers' favored option in this domain.   Our Features : Design - As per OCEAN Std. Material - Carbon Steel CS A 216,WCB.WC6, WC9,WCC.LCB,LCC,,CF8,CF8M,CF3M, etc. Disc & Seat - CS SS304.304L,SS316,316L,GM,monel Trims - F6, SS 304,304L, 316,316L, Monel satellite HF etc. Rating - ASA 150, 300, 600,900,1500,2500, Ends conn. - Flanged ends , Butt weld, B16.10, B16.25 Testing - API 598 / BS 6755 Application - Air, Gas, Water, chemicals, Pharma, oil, acid, Foods, vacuum, heat treatment ,paper & sugar industries, Power plant

We hold expertise in offering quality Sight Glass that is manufactured as per international quality standards. This Sight Glass is specially constructed in a way that provides complete view from every angle.

• Brand Name: Sanipure Water Systems
• Category: Industrial  Piping Systems
• Product name: Piping Skids
• Min order Qty: 1pc
• Sizes in inches: Customized
• material: SS304L/SS316 L
• Applications: Drinking Water Pipe, Structure Pipe,  Chemical Handling Pipe,Gas Pipe,Water distribution system
• Feature: Piping Skids are a model mechanism for the systems with turbidity and very high sedimentation, silt, gravel, These filters are particularly fabricated to suspend the impurities,Long lasting, Durable and reliable

Applications   Thermowells protect the stem or bulb of the thermometers from corrosive effects, pressure and viscosity of process fluids. It also allows removing of the temperature gauge for recalibration, repair purpose without disturbing the process.   Features   4 Available in Straight Type, Taper Type, Flanged End Straight Type and Flanged End Taper Type 4 Material SS316 or SS304 or Brass or other as required 4 3/8", ½”, 3/4", 1"  bsp or npt connection or other as required     or Flanged End Connection as per DIN, ASME, BS Standards 4 Special coating/lining on thermowell of special material    

Drill Pipe Wipers, thread protector, drill pipe wiper

With an experience of more than 30 years, we are recognized as a major Manufacturer, Supplier and Exporter of Sight Glasses from Mumbai, Maharashtra. Made from high grade glass, our product has attributes like heat and chemical resistance, great durability, low thermal expansion, etc. Buyers can avail bulk quantities of Sight Glasses from us at competitive prices   Introduction :Sight glass is the only item which has nothing to do with glass pipelines. This is used to check inline flow of chemicals or liquids in horizontal as well as vertical installation. It is constructed to give full view from any angle to save time and energy. It is also made a multi-purpose to achieve high standards of economy. Since one sight glass can be used with MS/rubber/lead glasslined etc. It leads to less inventory. One sight glass consists of a glass pipe section, one metal frame, one pair of teflon bush and washers.( Metal frame  can be made of MS/SS 304/SS 316)Glass pipe section is made from borosilicate glass which is highly heat resistant and has low thermal expansion and excellent chemical durability. This pipe section is flared at both ends to increase its compressive strength as well as to ensure of leak proof fitting in metal frame.Metal frame is of mild steel, zinc plated or resin powder coated, as desired, to eliminate the risk of corrosion. Both flanges of frame are welded with stud so that the stresses and vibrations of line, where it is to be fitted, would not transfer to glass pipe section. Its chuck nut system keeps the glass pipe section in compression and make it easy to replace the same.Teflon bushes are provided on both the sides of glass pipe section in a way that flowing liquid/chemical would not be in contact with any metallic part of the sight glass. Further teflon washers are provided to use as gasket on both sides at the time of fitting.Sight glasses can be supplied with the flanges frilled as per customers requirements. However as it is found that most of our clients using sight glasses demand ASA 150 table flanges. We use to keep ASA 150 table glasses ready in stock.