Piston Pumps Dealers in Mumbai

• Type: External Gear Pumps
• Diameter: 0-100mm
• Application: Commercial, Industrial
• Weight: 0-25kg, 25-50kg
• Frequency: 50Hz, 60Hz
• Driven Type: Electrical, Hydraulic
• Pressure: 0-5Bar, 10-15Bar, 15-20Bar, 5-10Bar
• Motor Power: 10 HP
• Phase: Double Phase, Single Phase
• Temperature: 0-100°C
• Pump Speed: 1440Rpm, 1800Rpm

We are a trusted Supplier of Piston Water Pumps. The Water Pumps we make available are manufactured in compliance with set industrial norms.  Sourced from known vendors in the market, our Pumps feature high efficiency, low power consumption and high durability.  Bulk orders pf the Pumps are processed by us as per the specific requirements of the buyers. One can obtain these at affordable rates from us.

Maximum delivery up to 5 gpm (19 lpm) and maximum fluid working pressure up to 180 psi (12 bar). Ideal for lower viscosity fluids. Fast Flo 1:1 pumps are designed to operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options. Features:Air-powered for high reliability and low costDelivery up to 5 gpm (19 lpm)Available in stainless steel or carbon steelUL options available when installed in accordance with NFPAMaterial:AntifreezeAsphaltsWindshield Washer FluidMotor OilUsed OilHydraulic FluidOilInks and ColorantsApplications:Oil TransferInk TransferPumpingFluid TransferIndustries:Printing and Publishing - Ink TransferDealerships and Quick Lubes - PumpsInk Transfer

• Type: Hydraulic Piston Pumps
• Certification: ISO 9001:2008 Certified
• Driven Type: Hydraulic
• Warranty: 1yr
• Automation Grade: Semi-Automatic
• Power: DC
• Brand Name: Sauer Danfoss
• Pump Type: Radial Piston Pumps
• Model Name/Number: Motors 40 series M91 pumps,M46 pumps & motors MPV023,MPV025,MPV035,MPV044,MPV046,MPT 023
• Usage/Application: Industrial
• Motor Speed: 2000 RPM
• Discharge: 100-130 LPH
• 100-130 LPH: Cast Iron
• Motor Horsepower: 2 HP
• Frequency: Semi-Automatic
• Installation/After Sales Service: Provided

Available in size 20/415 plastic small lotion pump in full milky white. this is suitable for hand wash purpose

PC – 12B Mini Condensate Drain Pump Low noise control Compact modern design High flow rate Built – in alarm circuit Suitable for all kinds of air conditioners Voltage : 100 ~ 230V,  50/60 Hz Suction lift : Max.2m(6.5ft) Discharge head :  Max.10m (26ft) Flow rate : Max.12L/H (3.2GPH) Tank capacity : 35ml

• Brand Name: MARK
• Material: Aluminium / Poly Carbonate
• Power Source: Pneumatic
• Reservoir Capacity: 0.6 litre to 5 litre
• Discharge: 6 cc to 10 cc
• Pressure setting: 15 kg to 20 kg /sq.cm

Below are the product details of Rotary Piston Vacuum Pump Models: KT-150C KT-300D KT-500D KT-850D Features: Full pumping speed down to 1 Torr Can operate continuously (at any pressure) up to 100 Torr Ultimate pressure 10 Microns (McLeod Gauge) Adjustable gas ballast permits handling of condensable vapors No metal to metal contact in pumping chamber Unequaled durability, even in dirty applications Compact footprint design Simple installation, no special preparations required Triplex piston design provides quiet, vibration-free operation

For the convenience of the clients, we issue an invoice to them including the details of the sale transaction as well as indicating the quantities, products as well as agreed price. Thus, we maintain transparency in our dealings and payment procedures. Staffed with latest machines and leading technology, we make certain that the material we use is as per the stated norms and meet the international standards.

• Application: Chip Breaking , Gun Drilling, High Pressure Washing
• Power: Electric
• Type: Coolant Pump
• Country of Origin: Made in India
• Brand: Rajamane
• Usage/Application: Industrial
• Maximum Pressure: High Pressure Washing
•  :  

• Application: Machine Tool, Plastics, Construction
• Operating Pressures: up to 250 bar (3625 psi)

• Type: Automatic
• Certification: CE Certified
• Weight: 10-20kg
• Driven Type: Electric
• Pressure: 100-200bar
• Warranty: 1 Year

With an expansive range of available features (open loop pump and closed loop pump) and design options (axial piston pump gear pumps radial piston pumps electro hydraulic pumps), pumps provide both the performance and flexibility to meet the requirements of just about any application for industrial and mobile industries.

• Voltage: 110/220/300/400/440/500 Volts.
• Sizes: 12mm to 100 mm.

HIGH PRESSURE RECIPROCATING PUMPS PISTON PUMPS Single, double or triple pistons. [triplex pumps] Working parts of various different metallurgy such as SS, Bronze, Duplex, CI, etc. Max Temperature - 200° C.

• Pressure: 25 bar / 360 psi
• Reference: 0660
• Weight: 235 g
• Length: 270 mm / 10.6”
• Handle: Aluminium

The Z Shock pump can easily reach optimal pressures for your fork or rear shock. It combines performance, ease-of-use and comfort.

• Features: Low noise level , Smooth functioning , Easy maintenance.
• Item Code: NE055
• Model Name/Number: NE055

• Material: Mild Steel
• Color: Blue, Brown, Green, Gold, Grey, Light White, Red
• Weight: 0-10 kg, 10-20 kg
• Power Source: Electric
• Finishing: Color Coated
• Condition: New, Used

We offer unibloc pd mini pump. The fully machined stainless steel gearbox is easy to clean and maintain and protects against corrosion. The streamlined and crevice free rotor housing allows for a cip andor sip-able pump. The bi-wing rotor design reduces shear and pulsation of the product while maintaining accuracy of the flow.

  The Revolution is the first hybrid rotary lobe & circumferential piston pump with front loading seals. See for yourself how we raised the bar on performance & redefined ease of maintenance for our industry.   Ease of Maintenance: Fast, front loading seal changes while pump is still in-line Easy access shimming for setting rotor clearance Performance: Improved volumetric efficiency in low & high viscosity applications Enhanced front cover design eliminates dead zones Cleanability: Efficient CIP (clean-in-place) ability is standard for all Revolution pumps Stainless steel bearing retainers & foot* *Stainless bearing retainers & foot available as standard on models 150-1300.

Small scale pressure pump with remarkably high pressure and flow rates ? Easy to transport ? Applicable for the supply of compressed air ? Long-term laboratory operations possible ? Low noise level ? Maintenance free ? Environmentally friendly ? Direct drive transmission ? Temperature protection for the motor ? Filter for dust and liquid particles ? Pressure gauge and controller ? CSA, CE, UL, PSE, FDA & TUV GS approved..

• Brand: Vickers
• Model Name/Number: PV032
• Usage/Application: Industrial
• Weight: 30 Kg
• Max. Displacement: 32 cm3
• Output Flow at 1500 min-1: 48 I/min
• Nominal Pressure pN: 350 Bar
• Max. Pressure Pmax: 420 Bar
• Input Power at 1500 min-1 and 350 bar: 31 KW
• Max Speed: 2800 min-1

• Features: Long life, Precisely planned, Tough body, Impervious to rust

Dear Sir, this is the Reference to Your Requirements, We are Pleased to Quot for the Same as Under. quotation: (1) hydromotor: A6vm 160ha1t/63w-vzbo27a Rd91604 unit Price: 5,26,250/- piston Hydromotor A2fm23/61w-vbb040 Rd91001 unit Price: 87,500/- above Offered Price is for Each, terms & Condition: payment: - 50 % Advance and Remaining Payment Against Delivery. delivery: - 45 Weeks taxes and Duties Will Be Extra as Applicable. validity: - 45 Days

Reciprocating pumps often suffer from pulsation problems on both the suction and discharge side. Many of the problems can be traced to poor suction conditions where the pressure at the inlet to the pump is less than that required by the pump manufacturer. The suction pressure available at the inlet to the pump is often referred to as either NPSHa (Nett Positive Suction Head available) or NPIP (Nett Positive Inlet Pressure). The Flo-Dyne Suction Stabiliser is a gas, or vapour, charged pulsation dampener which if installed at the pump suction will eliminate all NPSH problems and ensure a smooth running pump. For maximum effect the suction stabiliser may be combined with the Flo-Dyne liquid filled discharge pulsation dampener. It is ideal for use on pumping systems where pumping conditions change, or where the pumped liquid is not compatible with rubber membranes or cellular foams. The Flo-Dyne suction stabiliser works by using a gas cushion over the pumped liquid so that we can then reduce acceleration head and pulsation by exploiting three basic properties, which each contributes to the overall elimination of pulsation and NPSH problems: Dampening Effect: Every suction stabiliser has a gas charge which, as it is obviously more compressible than the liquid being pumped, will provide a capacitance or spring effect which in turn will absorb the pulsation created by the abrupt flow change as the pump suction valves open and close. Separation Effect: Flow through the suction stabiliser is slowed and rotated before leaving through the exit nozzle. By controlling the transit time and flow velocities through the equipment, entrained gases are encouraged to break out of solution and collect at the top of the stabiliser instead of passing directly into the pump inlet nozzle which reduces the quantity of entrained gas entering the pump, thereby reducing or eliminating the conditions for cavitation to happen. Volume Effect: The suction stabiliser acts as a mini-storage tank, the stabiliser provides a full charge of liquid when the pump valves open and allows for smooth acceleration and deceleration of the liquid in the line. By providing the tank volume close to the pump, acceleration head is eliminated and the possibility of cavitation occurring in the pump cylinders is eliminated. The suction stabiliser will provide complete compliance with the requirements of API674 for pulsation levels. All units are constructed to meet your local and national regulatory requirements and will be made either as piping, or pressure vessels, to fit into your piping. Units are typically built to ASME VIII vessel code, or ASME B31 piping code, however, supply to other national codes such as IBR, CODAP, and Stoomwezen is always possible. Each unit may be supplied with connecting flanges, or with bevelled connections, and ready for welding directly into your pipework system. A sight gauge, suitable level instrumentation, or an automated control system can be provided to monitor or control the gas / liquid level.

Models :  HS-SD-01-1/8 HP, HS-SP-01-1/3H.P.HS-WP-1 3/4 HP   Pressure  From 30 PSIG to 100 PSIG   Free Air Displacement - From 20LPM to 100LPMElectric Motors Equipped with Permanent magnet of Superior Class.'F' Class Insulation winding for long & durable trouble free operation

 CED coated pump components in Pacific Series• Stainless Steel insert provided in casing & adaptor• Brass Impeller• Self Priming upto 8.0 meter at mean sea level• High quality and long life mechanical seal• Fitted with Thermal Overload Protector• IP 55 protection• Class F insulation• Aluminium pressure die cast motor body Applications • Bungalows, flats, laundries, clubs• Gardening, lawn sprinklers• Booster applications

Piston vacuum pump is sort of vacuum production equipment suitable for pumping ordinary gases and little condensable gases (for example water vapour) with a gas ballast used. The pump must be fitted with appropriate accessories if gas is rich in oxygen, explosive, corrosive, to ferrous metal, chemical, reactive with vacuum pump oil. The pump cab is operated singly. It also can be as a backing pump when combined with another high vacuum pump such as diffusion pump oil booster vacuum pump and roots vacuum pump. Rotary piston vacuum pump can be used for a longer time than the sliding vane rotary vacuum pump. Application:Piston vacuum pump is widely used in photovoltaic industry, aviation, petroleum chemical industry, pharmacy industry, vacuum heat processing, vacuum coating, ceramics industry etc.