PLASTIC ENGINEERING WORKS Malad West, Mumbai, Maharashtra

HDPE Pipes which is available as per IS 4984 : 1995. The HDPE Pipes are available in various sizes from 20mm OD to 630mm OD in all pressure ratings. These HDPE Pipes are available in PE-63, PE-80, PE-100 Grades.

Tower Packing PP Pall RingsSIZES 1", 1.5", 2, SIZE Nos.cu.m., 1" 51,000, 1.5"13,500, 2" 6,500.

STANDARD TABLE IS BS10 TABLE D. WE CAN ALSO MANUFACTURE FLANGES AS PER ASA 150 TABLE OR F TABLE SUBJECT TO QUANTITY. BIGGER DIAMETER FLANGES CAN ALSO BE MANUFACTURERED IF THERE IS MORE QUANTITY.

Tower Packing PP Pall Rings SIZES 1", 1.5", 2", SIZENos.cu.m., 1" 51,000, 1.5" 13,500, 2" 6,500.

Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm, Manufactured from Poly Propylene, a Chemically inert thermoplastic, Can be used upto 90°C Temp, Hydraulically and Pneumatically tested for 10 Kg upto 4", Protective and Resistive from most of the corrosive Chemicals.

Air handling has become a serious and sensitive area of attention in industries. Not merely for keeping the environment pure and clean but also to maintain better working condition. Obviously to improve efficiency. Air handling means to keep away obnoxious odour, drive dustfilled air gas, fumed and vapour from the working place. High degree of efficient air fans are thus required. PEW Centrifugal Exhaust Fans fill the position. We are manufacturers of Centrifugal Exhaust fans in India, in a wide range from 34 HP to 10 HP, and have become standard equipment as industrial Exhaust Systems. They are fabricated from PPFRP, PVCFRP. The fans are mostly resistant to weathering, corrosive fumes and gases etc. They are ideal for Laboratory Ventilation, handling of chemical fumes, moist gases etc. They have been proven suitable for pickling Plants and other refining processes, electroplating and pharmaceutical Chemical industries etc.

Spares for Dyes and Intermediate, PP DRYER TRAY Available M.O.C:-PP Natural, Available Size: 32" x 16" x 1¼" and 16" x 16" x 1¼".

Size : 16" x 16" x 1¼".

We are one of the leading manufacturers and suppliers of PP Pipe Fittings, Polypropylene Pipe Fittings in India. Polypropylene Pipe Fitting range consist of Tee, Elbow, Bend, threaded, plain socket, long neck pipe end, stubend, short neck pipe end, stubend, Concentric reducers, Nut Bolt Washers, End cap,

Flange:Size 20mm. to 630mm, Material Polypropylene HDPE, Blind Flange: Size 20mm. to 315mm, Material Polypropylene, Size in mm 20(½"), 110(4"), 110(4").

Size : 20mm. to 630mm.

e are one of the leading manufacturers and suppliers of PP Pipe Fittings, Polypropylene Pipe Fittings in India. Polypropylene Pipe Fitting range consist of Tee, Elbow, Bend, threaded, plain socket, long neck pipe end, stubend, short neck pipe end, stubend, Concentric reducers, Nut Bolt Washers, End cap, Hose Flange, Slipon flanges, stubend, pipe end bore flanges, blind flanges, (all flanges available as per BS-10 Table D, ASA 150, F table and also special flanges can be fabricated depending on customers requirement), Hex nipple, hose nipple, etc. In PP Pipe fittings PP Elbow and PP Tee are of moulded socket weld type for smaller sizes whereas bigger sizes need to be fabricated which is also done by us. Being a PP Pipe Fitting manufacturer we have priced our pipe fittings most economically. It has many applications in the field of chemical & process industries, pulp & paper industries, Electroplating plants, Pharmaceutical, Effluent treatment plants, Salt & Marine industries, Power plants, Steel rolling mills, dyes & dyestuff industries, Food & beverages etc..

PP FILTER PLATES SIZE 6" 10" & 12", PP GEAR SET FOR 15 KG BARREL AND 30 KG BARREL, PP BARREL BUSH FOR 15KG BARREL & 30 KG BARREL,, PP IMPELLOR FOR BLOWER SIZE 8".10",12.5",15", 16", 16.5", 17", 18", 24" , MS PP COATED BOLT NTUS AND STUDS, PP V BLOCK SIZES SMALL MEDIUM & LARGE, PPHDPE WELDING MIRROR.

PP FILTER PLATES SIZE 6" 10" & 12" 2 PP GEAR SET FOR 15 KG BARREL AND 30 KG BARREL 3 PP BARREL BUSH FOR 15KG BARREL & 30 KG BARREL 4 PP IMPPELLOR FOR PUMP SIZE 5" 5 PP IMPELLOR FOR BLOWER SIZE 8".10",12.5",15", 16", 16.5", 17", 18", 24" 6 MSSS INSERT PP WING NUT SIZE 38" & 12" 7 PP V BLOCK SIZES SMALL MEDIUM & LARGE 8 PP MOULDED SS NUT (10TPI) 9 MS PP COATED BOLT NTUS AND STUDS

PVC Cable Tray, supports & other provide a very economical and completely non-corrodible system for cable installations. Unaffected by most acids, alkalis and most commonly used chemicals such as ammonia, petrol, hydrogen, potassium chlorate, phosphorous, soap, sodium, sulphate Can be cut with ordinary saw. Light to handle. (Specific gravity 1.4) Holes cab be drilled with ordinary hand drills. No sharp edges are left after cutting.

Tower Packing PP Pall Rings SIZES 1", 1.5", 2" SIZE Nos.cu.m. 1" 51,000 1.5" 13,500 2" 6,500

We are pleased to introduce ourselves as manufactures of protection guards in semi – moulded HDPE & one piece moulded polyester + CSM Fibre Reinforced Plastic (FRP) mainly used for protection of all types of electric motors.

hdpe pipe fittingWe are one of the leading manufacturers and suppliers of HDPE Pipe Fittings (Hdpe Pipe Fittings Butt Welding) in India. HDPE Pipe Fittings range consist of Tee, Elbow, Bend, threaded or plain socket, long neck pipe end, stubend, short neck pipe end, stubend, Concentric reducers, Nut Bolt Washers, End cap, Hose Flange, Slipon flanges, stubend, pipe end bore flanges, blind flanges, (all flanges available as per BS-10 Table D, ASA 150, F table and also special flanges can be fabricated depending on customers requirement), Hex nipple, hose nipple, etc. In HDPE Fittings the HDPE Elbow, Bend (90 deg.) and HDPE Tees

Size 20mm. to 630mm, Material Polypropylene, HDPE,Blind Flange, Size20mm. to 315mm, Material Polypropylene.

We are one of the leading manufacturers and suppliers of HDPE Pipe Fittings (Hdpe Pipe Fittings Butt Welding) in India. HDPE Pipe Fittings range consist of Tee, Elbow, Bend, threaded or plain socket, long neck pipe end, stubend, short neck pipe end, stubend, Concentric reducers, Nut Bolt Washers, End cap, Hose Flange

HDPE Bend Butt Weld:Size 20mm. to 160 mm, Material Polypropylene, HDPE, Parameters of bend butt weld Size in mm:20, 25, 200, 250, 315.

We are pleased to introduce ourselves as manufactures of protection guards in semi – moulded HDPE & one piece moulded polyester + CSM Fibre Reinforced Plastic (FRP) mainly used for protection of all types of electric motors. This Guards are light in weight, easy to handle and not affected by any corrosive chemicals nor heavy rains Our FRP guards are suitable for all kinds of industries. FRP canopies are available for all types, makes of motors both for horizontal (B 3 mounting) and vertical (V 1) mounting . Frame size 71 M to 630 M and also for HTLT motors. It has been a general practice of providing some short of protection to electric motors, the most common being from MS or GI sheets. Due to prevailing corrosion, MSGI guards needs periodical painting but again it has limited life. MSGI guards are heavy too, compared to plastic guards.

hood and ductings offer you complete resistance towards most acids and alkalies fumes used in chemical industries etc. Being light in weight they are quite easily installed. Total fume removal systems comprising ofExhaust Fans, Hoods, canopies and ductings can be fabricated and supplied as per the clients requirement. Ourhoods and ducts can also be reinforced with fiberglass if necessary.

Cable Trays are used to support power cables & control cables for indoor & outdoor application.GIMS cable Trays erode, corrode and spread heat, thus lead to power interruptions. Our FRP cable Trays are safe, durable and cost effective for routing & supporting cables. Manufactured as per NEMA BISConsultants specification

We are manufacturers of Centrifugal Exhaust fans in India, in a wide range from 34 HP to 10 HP, and have become standard equipment as industrial Exhaust Systems. They are fabricated from PPFRP, PVCFRP. The fans are mostly resistant to weathering, corrosive fumes and gases etc. They are ideal for Laboratory Ventilation, handling of chemical fumes, moist gases etc. They have been proven suitable for pickling Plants and other refining processes, electroplating and pharmaceutical Chemical industries etc. The fans are also available as per the clients requirement. Not only improved experience but also the nature of thermoplastic we use to counter corrosion and gasses have madePEW Fans widely acclaimed and reliable. They are available in direct and ‘V’ belt driven types.

Cable Trays are used to support power cables & control cables for indoor & outdoor application.GIMS cable Trays erode, corrode and spread heat, thus lead to power interruptions. Our FRP cable Trays are safe, durable and cost effective for routing & supporting cables.Excellent weather ability – UV Stabilized, Fire retardant, No corrosion , no chemical erosion, High Load bearing capacity, Suitable for horizontal, vertical layout, Load bearing capacity.