Plate Load Test Equipment Dealers in Goregaon, Mumbai

Complies with USP, IP and Ph. Eur. specifications Parking of the baskets at the top position at the end of the test with alarm Green illumination from bottom for better visibility Programmable timer with dual range in min-sec, hrs-min and in continuous mode Snap-click loading and a swivel free baskets movement Maintenance free smooth drive

• Brand Name: AIC

We are offering flakiness, thickness gauge etc.it is constructed of heavy gauge steel sheet with chromium plating having slots with marked sizes of 63 - 50, 50 - 40, 40 - 31.5, 31.5 - 25, 25 - 20, 20 - 16, 16 - 12.5, 12.5 - 10 and 10 - 6.3. Complete with measurement report traceable to national standards and instruction manuals.

• Type: Penetrometer
• Material: Mild-steel, SS
• Application: Industrial
• Condition: New
• Frequency: 50Hz, 60Hz
• Phase: Double Phase, Single Phase

SLUMP TEST APPARATUS. Complete with Slump Cone having 100mm Dia Top x 200mm Dia Bottom x 300mm Height, octagonal shaped Base Plate with Swivel handle and Bakelite Bolt-knobs & 'L' Shape steel clamps and Tamping Rod of 16mm Dia x 60mm Long with 0-30cm Graduation.

To know the quality of paint on the pre-painted sheet therefore, samples are cut and deep drawn according to erichsen principle to determine the depth to which they can be drawn before the paint cracks.

• Desiccator Dia: 150/200/250/300mm

Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time. A vacuum gauge is provided to indicate vacuum level which is connected ti isolation valve to disconnect the source. Thus avoiding the need of continues running of vacuum pump. 99 minute Digital timer helps the operator to do other work It's amazing compactness saves lot of valuable place in process laboratories.

• Type: Automatic Density Meter
• Material: Aluminum, Cast Iron, Plastic, Stainless Steel
• Application: Industrial
• Color: Brown, Green, Grey, White
• Voltage: 110V, 220V, 230V, 380V, 440V, 450V
• Driven Type: Electric
• Feature: Accuracy, Digital Water Meter Display
• Warranty: 1 Year, 2 Years, 6 Months
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Opearting Temperatue: 10-50D/C, 50-100D/C

Gmp-gc-85 digital penetrometer: microprocessor based unit provides automatically timed operator programmable penetration measurements • conforms to all is,astm, ip, iso 9001 and related specifications possible user groups are: adhesives, airports & aviation, asphalt, automotive, beverages, bitumen, chemicals, confectionery, constituent, cosmetics, fats, food, lubricant, mastics, motor vehicles, paraffin, penetration, pharmaceuticals, plastics, polishes, soap regulatory authorities, road research, rubber, tar, various, wax unit tests the consistency of lubricating greases, petroleum waxes, bitumen’s, pastes, creams and other solid to semi-solid products, including a variety of food products. Microprocessor control provides a full range of measurement and reporting options. The penetrometer defaults to the standard astm interval of 5 seconds “or” 60 seconds “or” as per choice. All selected parameters are retained in memory and automatically repeated in subsequent tests until changed by the operator. Penetration measurements in the full range of 0-400 “or” 0-600 in 110th of mm scale “or” 1100th of mm are reported directly in digits. If a test result falls outside of the programmed range, an audible signal and visual error message alert the user of a failed sample. It is incorporated with motorized placement of rack on the penetrated plunger carrying needle & locks the reading once it touches tip of the plunger-head with auto-positioning of rack at its home position for subsequent next measurement. It is also coupled with electrically operated plunger solenoid coil to activate release of plunger shaft as per set duration of time. For precise placement of tip of needle to the specimen sample surface, the unit is coupled with jack for updown movement.the height of the whole assembly (rack &pinion ,plunger with electrical coil etc)can also be adjusted & fixed for test-run results can be communicated to a printer or computer via a built-in rs232 interface (as

A 19mm vane blade is screwed in to the base of the Geovane and the vane is pushed into the soil. Simply rotate the Geovane at a rate of 1 revolution per minute and take a reading off the face when the soil fails. A pointer stays in place when failure occurs so all you have to do is look up the reading from the face on the supplied calibration chart to get your reading in kPa.

The vacuum leak detection system LAB-Care finds smallest leaks and hole in tablet blisters and other flexible, semi-rigid packages. Vacuum, test and penetration time are adjustable and can be stored into a database. This ensures that identical products will always be tested with the same parameters so that test are repeatable.

Electrolab offers a wide range of Disintegration Testers in India.

disintegration testers, powder flow testers, Hardness Testers

• Certification: CE Certified
• Color: Black, Blue, Gray, Brown, Red, Pink
• Voltage: 220V, 380V
• Driven Type: Electric
• Warranty: 1year, 2years, 5 Years
• Automation Grade: Automatic,Fully Automatic,Semi-Automatic
• Use: Soil Testing

Laboratory Ovens, Automatic Self Adhesive Sticker Labeling Machine